Likes
Comments
Share
@Northfork
Follow
9-7-25. What can I say the Apple fritter continues to do very well have no insect damage and no major issues to mention. The plant has been completely trellis for the last time. The bud structure is really great. The branches are really large. Really happy plant is doing well. top dressed it’s last top dress with one cup each of flower, finisher, primo Hydroslate, pure kelp, dry, and soluble seaweed extract as well as Azomite. All of these are micronized and soluble powdered so the plant should uptake the nutrients much faster than traditional top dresses. Don’t have any large granules that are gonna take time to break down and water in from here on out it will be water with its last two sugar water drenches, which I will use boogie brix, and black strap molasses brixs. with all of these nutrients and amendments in place I will let the girls ride out their last few weeks with Just nice rich mountain water to ensure they use every bit of the sugar, phosphate and potassium for frosty buds with heavy resin and terp production .
Likes
Comments
Share
This plant was a show-er for sure! The plants sprung up from the very beginning with huge leaves and thick colas! Nice purple hues and dense nugs! Would definitely grow again!
Likes
3
Share
@AustinRon
Follow
Week 3 - Lemon Jeffrey (FEM) Lemon Jeffrey by IRIE Genetics (6 Starts for 2 Finishers) 63-70 Days Flower (9 - 10 Weeks) Seeds Wet: Monday 14 May 2023 Harvest Date Range: [ 2023-06-30, 2024-07-07] Must Do before Week End - [ ] Electrical Tape over power plug lit switch & Humidifier Fan Charging Light Start of week: - Dates: [06-05-2023:LJ2Q 22:S:3:1, 06–1-2023:LJ2Q 28:S:3:7 ] - LightIntensity: [ 490, µMol/s2/m2 ] - LightDistance: [ 19.5, in] End of Week: - Plant Height Range: [ 4, 5, in] - Water/Day/Plant: [100, ml] EnvironmentalCurrent: - LightIntensity: [ 405, µMol/s2/m2]1 - Temp: [81 , °F] - RH: [ 69, %] - VPD: [ 0.87, kPa] - Scotoperiod: [ 6, hrs] Environment NOTES: - Because room temperature overnight is 68°F, we need to 1. Nightly (1900) CLOSE AC VENT to Grow Room 2. Daily (0700) OPEN Vent to Grow Room - Goal is to maintain TENT & CABINET TEMPERATURES OVERNIGHT - RULE - CLOSE Room Airflow during LOW TEMP periods(2200 - 0700) - OPEN during HIGH TEMP Period (0700 - 2200) - I’ve enabled 4-6°F LOWER Temperatures by externalizing the LED’s (Meanwell) Driver. However, since inflow is 68°F from 2200 - 0600, the tent, especially when plants are small, reverts to the Room Temperature. Blocking airflow to the room during the 68°F Period allows the room to warm to desired grow temperatures (74-78°F) SOG Strategy - Eliminate weak, funky plants - @18” Height @ Flip to 12/12 (or …?) - Target Minimal DLI: 40 Mol/day (Optimal w/out CO2 Supplementation) - Ref: https://hortamericas.com/blog/science/mastering-light-management-optimizing-crop-performance/' Objective - 8 Plants, Single Colas, Sea of Green SOP: - WEAR CLEAN GLOVES FOR ALL SEED OPERATIONS - CLEAN All Instruments before use - Light Strengthveg := 100 + (#nodes * 100) - Light Strengthflower := [ 1000, 600, µMol/s2/m2] - Scotoperiodveg := [ 1300, 1900, 6, hr] - Scotoperiodflower := [ 0700-1900, 12, hr] Environment - Vegetation (Week 3) - Temp: 78-84°F - VPD 1.0 ± 0.1 - Photoperiod: 18/6 - Light Strength: 400-500 µMol/s2/m2 - Fertigation - Primer A: [ 4, ml, gal] - Primer B: [ 4, ml, gal] - Silica Skin: [ 2, ml, gal] - Augments per QUART - CalMag Fuel: [ 2, ml, gal] - Lush Green: [ 2, ml, gal] - Root Anchor: [ 2, ml, gal] - EC: 1.1 - 1.5, pre-Transplant - EC: 1.1 - 1.2 post-Transplant - Bolt (3 Weeks) (Week 4-6) (F1-F3) - Temp: 78-82°F - VPD: 1.0 ± 0.1 - Photoperiod: 12/12 - Light Strength: 930 µMol/s2/m2 - Rooted Leaf Hydro (Reservoir), (RLA EC 0.8 - 1.6 - Half the RLA Hydro Chart) - Primer A, Primer B: [ 8 ml, gal] - Silica Skin: [ 4, ml, gal] - EC: 1.1 - 1.7 # 1.1, 1.4, 1.7 - Mid Flower (2 Weeks) (Week 7-8) (F4-F5) - Temp: 78-82°F - VPD: 1.2 ± 0.1 - Photoperiod: 12/12 - Light Strength: 930 µMol/s2/m2 - EC: 1.7 - Late Flower (Week 9-13) (F5-F9) - Temp: 78-80°F - VPD: 1.2 ± 0.2 - Photoperiod: 12/12 - Light Strength: [930, 850, µMol/s2/m2] - EC: 1.7 - 1.3 # Week 9-11 - EC: 1.3 - 1.2 # Week 12 - EC: 1.1 # Week 13 - Finish (Week 14) ( F10) - Temp: 78°F - VPD: 1.3 ± 0.2 - PPFD: 750 peak - Resin Bloom ONLY - EC: 0.8 ______________________________________ Environment.Seedling - Temp: 78-82°F - VPD 0.90 ± 0.50 (0.85 - 1.0 mbar) Rooted Leaf Hydro 0.8 - 1.6 EC (Half the Hydro Chart Week 1): - Primer A: [ 4, ml, gal] - Primer B: [ 4, ml, gal] - Silica Skin: [ 2, ml, gal] - SLF-100: [ 5, ml, gal] - EC: 1.1 - 1.2MAX - Per Feed Supplements: # (Mix&Feed Nutes Only) - Cal Mag Fuel: [ 2, ml, gal], [0.25, ml, pt]] - Lush Green: [ 2, ml, gal], [ 0.25, ml, pt]] - Root Anchor: [ 2, ml, gal], [ 0.25, ml, pt]] - EC: 0.8(1.1), 0.9(1.2) Mon 05 Jun 2-23 # Up Plant Week LJ2Q 22:S:3:1 - Raising Light Distance & Dimmer Intensity, Maintain Services & Tools -> Analysis Services -> Basic/Advanced Options -> Basic Options - ing PPFD @ 475 - Goal is to reduce PPFD Differential across different sized plants. - Increasing to week 2 RLA-Light Chart - EC: 1.1 - 1.2 - CalMag Fuel: [ 2, ml, gal] - Lush Green: [ 2, ml, gal] - Root Anchor: [ 2, ml, gal] - Dilute to EC: 1.1 - 1.2 mS  Tue 06 May 2023 LJ2Q 23:S:3:2  Wed 07 May 2023 LJ2Q 24:S:3:3 - Mix 0.75 Gal Feed - CalMag Fuel: [ 2, ml, gal] - Lush Green: [ 2, ml, gal] - Root Anchor: [ 2, ml, gal] - Photosynthesis Plus: [ 6, ml, gal] - Quillaja 20 Extract: [ 1, gm, gal] - EC: 1.3 Thu 08 Jun 2023 LJ2Q 25:S:3:4 - Jun 11th will be 4 weeks complete - good time for flip. ;-} - Mix 0.75 Gal Feed - CalMag Fuel: [ 2, ml, gal] - Lush Green: [ 2, ml, gal] - Root Anchor: [ 2, ml, gal] - Photosynthesis Plus: [ 6, ml, gal] - Quillaja 20 Extract: [ 1, gm, gal] - EC: 1.3 # EC: 1.4 NEXT FILL (Diluted EC from 1.5 to 1.3) - Cleaned Fertigation Chiller - Flush for 20 minutes with 2 Gallons of water - 10 ml/gal SLF-100 - 1 Cup of Kombucha Vinegar - Run tube dry, stop pump - 2nd Flush - Rinse tank of any solid elements - Refill with 2 Gal warm/hot water - 1 Cup of 30% Vinegar - Run for 1 hour - Rinse - Rinse Tank - Fill with 1 Gallon CLEAN Water - Run for 5 minutes - Dump Water  - Solar Rain/Silica Skin Foliar to All Seedlings Friday 09 Jun 2023 LJ2Q 26:S:3:5 - [x] Mix 0.75 Gal Feed - [x] CalMag Fuel: [ 2, ml, gal] - [x] Lush Green: [ 2, ml, gal] - [x] Root Anchor: [ 2, ml, gal] - [x] EC: 1.3 # EC: Keeping it here for a bit - a few leaf tips barely show yellow tips (tiny) Saturday Supplies Needed - [x] 30% Vinegar - [x] Duct Tape (For Polyester Tents) - [x] Central Drain Bucket - [x] Black Silicon Tubing (OD: 10mm, ID 8mm) Sat 10 Jun 2023 LJ2Q 27:S:3:6 - [x] Mix 0.75 Gal Feed - [x] CalMag Fuel: [ 2, ml, gal] - [x] Lush Green: [ 2, ml, gal] - [x] Root Anchor: [ 2, ml, gal] - [x] EC: 1.4 # +0.1 Saturday Night # Transplant/Flip Prep, Adding Peak Bloom Starter - [x] Mix 0.75 Gal Feed - [x] Peak Bloom: [ 1, ml, gal] - [x] Root Anchor: [ 2, ml, gal] - [x] Lush Green: [ 2, ml, gal] - [x] CalMag Fuel: [ 2, ml, gal] - [x] EC: 1.5 # +0.1 - [x] Select 8 Keepers - [x] Prep 1 Gal pots - [x] Light Seal Tent - [x] Prep Chiller - [x] 3 Gallons Rooted Leaf Hydro, EC: 1.1 (From 1.3 start at 1.1, ramp to 1.5, +0.2 EC/Fill Sun 11 Jun 2023 LJ2Q 28:S:3:7 - [x] TRANSPLANT 1L -> 4 Liter - [x] Install Plants in Tent - [x] WASH/RINSE DRIP TRAY Hydro Feet Chart is 1.6 - 3.2, Cut in Half for Light Hydro Flower through week 8, EC ~1.7 Flower week 8, EC 1.5 Flowers week 9, EC: 1.1 Flower Week 10, EC: 0.8 / Resin Bloom Only Transplant - Dust Great White on roots, Wear Mask - Spray Aloe Vera Solution - Install in Tent - Calibrate Drip Rings - Bags for Gifts
Likes
4
Share
Likes
5
Share
@Bud_vista
Follow
I tried budwashing for the first time. Went quite good. The buds are drying for the next 2 week
Likes
112
Share
@Dunk_Junk
Follow
So finally the harvest has started. Branches are harvested from the bottom pair upwards. Looking thru the pics again to write this, I remember feeling in awe of this plant. By node 4 they were very nice buds. Massive and dense. Node 6 and above is silly. Never seen anything like it. I had to take these pics because the 9" to 10" circumference on the buds, nobody would believe me 😅 Still got the main cola to do, got sidetracked doing other projects. But it will be done in the next couple of days, then to dry it all!!! Main cola trimmed and drying now...................... Sorry this update has been a while coming, i promise it's worth the wait. Dry weights in now starting from bottom node pairs and working up the plant: 29.72g 45.85g 54.91g 126.28g 82.51g 112.26g 75.24 Total = 526.77g !!!!!!!!! This plant is totally incredible. All lower buds apart from the main colas weighed 9oz... I was thinking another 2+oz main colas and nice buds. Well they was over 9oz too. Over 18oz from a single autoflower plant. Incredible, just incredible.
Processing
Likes
26
Share
Hello Sisters and Brothers. After 3 irrigations with water and atazyme. Today I have watered with the mixture of spirulina, Peruvian maca, brewer's yeast and bio molasses. I added 1 l of banana tea to the mix. in total 8 liters hosmotic water + 1 liter mixture + 1 liter of banana tea. the difference of varieties and fenotipes, is noted by the different hights of the plants. They oscillate between 130cm and 60cm. Thank everybody
Likes
7
Share
@Reaper
Follow
may 19: day 22 flower half strength nute scedule from GHE without additives
Likes
69
Share
@nonick123
Follow
Día 80 (19/08) Riego 500 ml H2O pH 6,55 Día 81 (20/08) Riego 250 ml H2O pH 6,55 Día 82 (21/08) Riego 500 ml H2O pH 6,55 Día 83 (22/08) 💥Comienza la floración! 💥 No riego. Día nublado y de bajas temperaturas Día 84 (23/08) Riego 500 ml H2O pH 6,55 Día 85 (24/08) No riego. Día nublado y de bajas temperaturas Día 86 (25/08) Riego con 1 Litro de Té Floración de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Healthy Harvest 8 ml/L + Insect Frass 16 ml/L + Hummus Lombriz 8 ml/L + Melaza 1 ml/L + Kelp Hidrolizado 0,25 g/L 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
3
Share
@Takeaims
Follow
Pineapple express is really going along nicely into week 8 for her got the white widow at the back left week 7 and grape ape back right week 8 you can see the difference In the colours of the leaves and how they have grown the pineapple is just a monster nice wide and fat would be good for a scrog net white widow and grape ape are really lanky but all 3 have many bud sites and I have had no problems at all with these girls so much fun and really easy to grow I surprised myself but I think alot need ti go down to the genetics and who you get seeds off use code ZAMMIGROW2024 for 20% off best thing I ever
Likes
15
Share
@Bluemels
Follow
An Tag 39 zeigt die Triple G eine winzige Vorblüte 😜 An Tag 40 habe ich die Triple G an 4 Zweigen getoppt.
Likes
10
Share
@savvage61
Follow
well im at the end of week 2 flower everything is going Great not a lvl as I hoped but every Bud is getting a lot of light Things look promising I belive this will be a decent harvest. I will change some things next grow I got a new 4x4 Gorilla grow tent with a NEW SET OF 5 Gal Air pots and another batch of living Soil AKA SUPER SOIL Ill explain how come living soil makes a huge difference when using a soil medium. Ill dump a lot of up comning changes and why next time till the Stay Safe Stay Stoned Day 20 flower off to a awesome start the bottom is leafless with good air flow dropping tempts down now trying to Draw out the purple and other colors I cleared out everything with low pistil put out to allow air and room for the hearty buds
Likes
6
Share
@CalGonJim
Follow
1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂
Likes
11
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Sie wächst sehr sehr schön 😉🤙
Likes
60
Share
Al no tener humificador se queda un pelín baja la humedad, pero estoy bastante contento con los parámetros. A partir de ahora iré comentando día a día para que podáis hacer un buen seguimiento. Día 8: 🔹Descanso 😴 Día 9: 🔹Trasplante a macetas de 1litro (en los siguientes cultivos pondré directamente en macetas de 1litro). 🔹 Riego con una solución de 2ml/l de acti-vera de Bio Bizz Ec: 600 y pH a 5.9. Siempre en base a un Ec de agua de 400 🔹Abono foliarmente con una solución de acti-vera de Bio Bizz unas 2, 3 veces al día. 🔹 Aplico tierra de Diatomeas sobre el sustrato, media cucharadita de café por cada maceta de 1litro para el control de plagas. Día 10: 🔹Abono foliarmente 2,3 veces al día con acti-vera de Bio Bizz 🔹Bajo la altura del foco a 50 cm de distancia con las plantas. Día 12: 🔹 Aplico foliarmente 1ml/l Acti-vera BioBizz + 0.1ml/l y pH a 6.0 de 2 a 3 veces durante el día. 🔹Remuevo la tierra para por encima con unas pinzas para airear el sustrato. Día 13: 🔹Riego con 0.2ml/l Acti-vera y 0.01 Rootbastic, Ec 1000 y PH 5.9 🔹Pongo unas guías de madera para una mejor estabilidad y desarrollo de la planta. Día 14: 🔹Aplico foliarmente 1ml/l Acti-vera BioBizz + 0.1ml/l y pH a 6.0.
Likes
42
Share
Hello everyone, This week I added some calmag because i spotted deficiency on my indicas( Critical kush), Not a big deal but since i only make one bucket for all the plants instead of 2 seperate ones, my indica's had a little bit to less. Indicas like to have more nutrients then sativa's. Did some LST again, removed some leafs that shadow my new branches(nodes) and yes the plant that i don't want to keep is still here lol. Trying to ask people if they want a plant for free because its just sad to throw it away. If it doesn't get a new home in the comming weeks, i have to throw it away. The way i did LST is slightly different most of the times growers like to get rid of alot of leafs, only to have the node leafs intact, i have done this a lot of times as well but this time since it is just a fun outside grow, i kept most of the leafs, just to see which LTS way is better. Yes keeping the leafs cost some energry, these leafs will grow unnecessary but in the other hand they will catch up alot of sunlight which is also needed. I also kept 4 main branches. Most people grow 2 branches and create side branches on them which is more common to do or just let the plant grow normaly, LST her and when she gets like 6-9 main branches, to top her. I already have the feeling that the two other options are better to do but hey we are not done yet. Sometimes i really wanted to cut off all the lower main branches and had to say to myself that if i would do that, it would be just another normal grow. or just get rid off al the nodes and just only grow those 4 main branches, but 4 branches would had been a little to less yield later on. But in return all thoose side branches will take alot of energy/nutrients too which can result into smaller and less compacter buds. In the other hand 4 main branches would not be a bad idea for outside grow in my country, we have bad weather here and not that much of sunlight the plant will have less energy needed to fully complete the colas and will get bigger instead of having many branches hmmmm.... I Anyway, I would never do these experiments with inside grows with alot of plants, it would be painfull and cost alot if it doesn't get good results. So i would advice to anyone only experiment if you don't care about the results. We will see :) I hope you enjoyed watching this week.
Processing
Likes
12
Share
1/14: This morning, I did a foliar application of big bloom and fulvic acid, then about 5 hours later I watered them with about a half-gallon of rainwater each and added armor si, humic acid, endoboost myco/tricho, liquid molasses, and a bunch of cal-mag. Today, I also I wired up and mounted my new samsung sun board strips (660nm/730nm) and my Solacure FlowerPower UVB fixture. I'm running the deep red/far red bud boosters a few hours per day right now, but will run them for the entire photoperiod once I start flowering them. I'll run the UVB for 4 * 15-minute sessions a day for the full flowering cycle, and if they don't protest too much I'll increase each session by 5 minutes and evaluate again. Some strains are more forgiving than others and I've got 5 different strains in this space...so really not sure much time I'll get away with exposing them to the deadly rays without damaging them too much...😈 1/15: I received one of the rapid led/growmau far red initiator pucks today. With the placement of my UVB light, I'm realizing I'll need another far red puck to have even and intense far red coverage, so I'm ordering another with Prime delivery and waiting to start flowering until I receive it. I sprayed them down really well with ph adjusted rainwater tonight to rinse off nutrient build-up from foliar applications. 1/16: I'm really excited to try flowering under 14/10. I grew photos indoors on an off for 15 years before I semi-retired. If I added up all the additional flowering time I could have done through the years if LED technology existed, I'd have had an extra truckload of bud to smoke. I did another application of Axiom Harpin a|b Proteins this evening, right before dark. I'm expecting a big growth burst this week, leading up to the flower stretch. I really need them to trigger under 14/10 within 4 or 5 days🙏 ...if not, I'll switch to 13/11 and wait a few more days🙏😟..if still no pistils are poppin, I'll go to 12/12 and chalk it up as bad luck or varietal indifference to Pr and Pfr manipulation. 1/17: I fed each of them about 3/4 gallon of full strength veg nutes. This will be the last. I'll go with half-strength veg and half-strength bloom for a week, then go with full strength bloom nutrients until I start flushing them in 6-8 weeks. 1/18: I installed the second far-red flowering initiator today and got all my timers configured for flowering: ========================================= timer#1 - power strip with qb's and red boosters 10:00am -12:00am timer#2 - (dual/independent setting) sideA- 3-way cube with uva bars 10am - 3pm 7pm - 11pm sideB- flowerpower uvb 1pm - 1:15pm 4pm - 4:15pm 7pm - 7:15pm 11pm - 11:15pm timer#3 - far red pucks 11:00pm - 12:15am timer#4 - sub-canopy tube 10am - 1pm 3pm - 6pm 8pm - 11pm ======================================== I also did some testing on the timers and sealed myself into the closet to check for any light leaks. All good.👌 1/19: Tonight is their first long night. It's ON!👍 1/20: I watered them today with about a half gallon each. I'm seeing calcium and magnesium deficiences here and there, so added some boomerang and heavy cal-mag-Fe along with liquid molasses, humic acid, and endoboost myco. I also foliar fed with big bloom and fulvic acid. That's it for week 4-
Likes
13
Share
@Crwfz1
Follow
Trying to get ph fixxed got new meter but flushing the cake now and gonna let durban go little longer just like last time needs more time but getting betyer looking getting fatter !
Likes
25
Share
@Sators
Follow
Day 36. topping for seven branches. Day 38. Water with 2L nutrients mix. Day 39. does super cropping for four brunches. Day 40. Switch to 12/12h