Week 5 flowering for our banana purple punch from fastbuds 420! The buds are starting to get fatter day by day, we continue with our food program. This week again we gave sugar shot, sticky fingers, bloom booster, silica, amino and master root all from xpert nutrients. All good at the moment 🤗

Tag 7 - Ende der 1. Woche. Die Pflanze wurde bisher nur mit Wasser besprüht.

-It's been a hot week and plants are doing great. -All the plants have almost caught up to BC1 in height. -There's been little rain so they're getting more water, pretty much every 2nd or 3rd day with the hose and once a week with food. -Definitely going to have to wire up alot of the lower branches once flowering starts as quite a few seem to be starting to sag under their own weight. Might start soon to prevent any damage. -And the White Widow Auto Midget is still just growing

13.06. Rainbow Sherbet 1# Day 49# The plant is at the end of its seventh week today, I moved it a few days ago to a mild shade and now it behaves much better and is progressing nicely. Rainbow Sherbet 2# Day 47# I have nothing special to write about this pheno, it is progressing well 5 nights ago there was a strong storm, the morning after the storm when I came to the site, I found some plants crooked, some normal, but there were no broken ones, thank God, but they were very stressed and what you can see in the pictures appeared on the leaves, some leaves were crispy at the edges, but still green, mostly shoots before the newest ones. I haven't had this problem before, I researched a bit on the internet and came to the conclusion that the wind burned them, and I also turned to GW for an opinion, two characters confirmed my opinion. Two days later I noticed that the matter was getting worse and that it was spreading, which worried me, so I contacted GW again for an opinion. Some told me that it was mold, some that it was an infection, disease and so on, mostly guesswork, but no one specifically told me what was certain, so I decided on nim oil, and whatever it is, I guess the problem should be solved. According to some leaves, I would say that insects might be the problem, but I really don't know, I haven't had similar problems before. I regulate the ph of the plants, I still don't feed them, there is food in the ground for another week, except for the fact that I added cal-mag after that storm when I watered them. I want to say that the plants are certainly not locked, and the heat is not yet so high that this would happen from the same, the more the temperatures have dropped and now it is perfect. Since transplanting, I have watered the plants only 2 times. Yesterday morning they were topped for the second time, only the main branches, I will do the next topping of the side branches. Last night I sprayed the plants with neem oil and already today the problem seems to be going away, if I tripped at least it doesn't spread further, that's for sure. I didn't mix the oil very well, I didn't add any soap or anything like that because I wouldn't really spray the plants with any chemicals, and on some of the leaves on one or two plants there is that thick, brownish liquid, so I hope it won't hurt them, I noticed that today during the day, I couldn't see it at night. I still don't know what the problem is, but my guess is still that the wind burned them or some insects. Speaking of insects, I think I noticed thrips on one plant on the underside of the leaf, so in addition to the neem oil I already gave, I also ordered SMC, so I will spray that at least once a week while they are still young. Happy Growing and Stay High!!!

🍀42fastbuds🍀 Guava auto x3: 57/63 days flow Papaya sherbet x3: 70 days flow Gorilla melon x2: 70 days flow

Day 50..they really look small and already fattening the buds. i don't know what to expect because i've seen some diaries and my plants look too small. i hope to see some more stretch over the next week or so.

Last leaf trim. Hopefully there's enough light getting to the lower bud sites now. Upped the bloom feed a little and turned on the secondary fan. Started to get a couple wet leaves where they were touching. I set up another tent too. 😬😬

This week has been a little better. Recovering from the ph and phosphorus deficiency issues. New growth has been a little better. Finally got rid of the crispy leaves from the deficiencies. I knew I was getting into a tough one with 200 ml of dirt. I just wanted to see what happened. I have learned a lot on this one. Buds are getting a little bigger each day. Merry Christmas and frosty buds to all.

2022-10-09 Everything is fine here with the 2 Plants one is growing in aglassbottle formed like a Skull, the other one into a Skullshaped Cup Training will start next Week, Plants established very well and working on 4 th Node Still having problems with Video upload website for for my Fertilisers: https://greenbuzzliquids.com/en/shop/ Code: mrs_larimar Breeder Info: 👉Black Sugar is an indica dominant hybrid of Black Domina, L. A. OG and Critical. It has kept the medicinal properties of L. A OG, a good flowering rate on the Black Domina lineage, and the compact size of the classic Critical strain. With its small growth, the strain produces large yields of up to 600gr/m2 on bushy branches. The buds are very dense and stinky. Black Sugar has a high THC level. The variety has a fruity citrus aroma. Dense smoke gives the effect of relaxation and body buzz. Good for Smoking before going to bed. It can become one of your favorite Seedsman strain Genetics Black Domina x L.A OG x Critical Harvest 450 - 500 g/m² Flowering 50 - 55 days THC 20.0% CBD 1.0%

D 114 05/09 Maybe 1 or 2 weeks for harvesting, she take flowering stage of 10-12 weeks

Exelent!

This week I've only been doing LST and minimal defoliation. Next week I'll be doing Bruce Banner topping, since it's a backlog, I'll be doing some experiments on it. I also used on one bush the training method - super cropping (video).

Day 28: What a great week it has been for these ladies this week. They have all got on with business in a very orderly fashion. Gorilla#1 has now been trained a little with some gentle L.s.t to pull her main down. I am hoping to not add any recovery needs that will slow growth down at all so no topping. #2 She has been the most productive and has gone way past her initial stake out points. Staked out she is showing approx 7-8 good prospects for mains. I took the small lowest growth out to not waste energy on them. #3 has engulfed her 30L pot already and tied down she looks even more able. she is showing small pre flower hairs at a few bracts . Her fan leaves are a huge size already and tucking them away was hard. #4 Has been pulled down on her 5th node to encourage the lowers to gain some size. she is still fairly squat and bushy looking. Sweet Cheese is slowly gaining size now and has remained low to the surface if the pot so far. I think she will be more natural grown. Overall it feels like a great entrance into their final weeknof flower possibly. Now we have some mains set out for their long stretch session in flowering. I don't think height will be an issue for them in my room this run.lol I gave them all a really heavy feed to get the pots active with the biosys and life-cycle again now and hope I can catch them right for their flowering boost needs. I have bought some shogun Pk and their finisher too. lets hope its a drama free week. Be safe and well growies

The Mandarin Squeeze sisters have made contact with the solution. They are both looking healthy, but are a bit behind the others in the grow room. I plan to lst them apart from one another they get bigger. Nothing more to report. Thank you Spider Farmer, and Terpyz mutant Genetics. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

11/13 Was the last night I kept the dome in the tent, started getting too crowded! But here on 11/15....lol i got bored and wanted to give it some more nutes! 😏 So I made a gallon up of some warm tap water PH'd down to 6.1, 8ml of FoxFarms Big Bloom, 5ml Boomerang, 5ml Wholly Mackerel, and 2ml of Power Si followed up with a very low dosed foliar spray of Xtreme Gardening's CalCarb before it was lights out. 11/17 I did some topping including the main stem. In the video (its off my Instagram story @SoilBGood) there's one that I'm not too happy about, the taller one with the stretched out spacing. But I don't doubt that its gonna give me some dank buds 👊 11/20 The plants are looking sharp....I foliar fed them with some Calmag / Power Si and they blew up over night lol B: Is a shot of the node growth NOTE: I ALWAYS DEFOLIATE EVEN IF I FORGET TO MENTION IT. NOTE NOTE: I swear I smell them already :D

Just water her u til harvest she is full of seeds

07/19/2020 Water,water and water. Flushing incredible smells! But gonna be small harvest.🤔 hope the next two beans are better. Ps. On a brighter note I did selectively pollinate a branch with Red Sky male pollen, and posting a picture of her first seed. Sky Gorilla lol😂