Likes
Comments
Share
@Bncgrower
Follow
We've reached the end of the penultimate week. This girl's buds are also very dense, resinous, and fragrant. Based on the trichome analysis, she's at a great point. 😎 In the 15 days before harvest, I start watering only with RO water and a pH of 6.2. At the beginning of the last week, and about 3 days before harvest, I'll flush with RO + Cleanse 10mL.
Likes
9
Share
@Rizik86
Follow
Day 22 - Plant is 6 inches tall. Tons of roots sticking down into the water. Checked PPM 215. PAR/PPFD ranges from 200 to 270 at the height of the plant. Day 25 - Plant is 9 inches tall and 12 inches wide. Water dropped a lot. PPM was 100. Added 2 gallons of RO. Added 10 mL of CalMag. Added 10 mL of the 3 base nutes Micro Grow and Bloom. Added 5 mL of each of the additives. PPM was 515. Day 26 - Plant is 11 inches tall. Fast growth! Short and bushy. Roots are thick as spaghetti noodles and formed a thick rootball. Nearly a dozen budsites. Stem is thicker then a pencil. Day 27 - PPM is 415 in am. Afternoon PPM is 370. Plant is 12 inches tall. PAR/PPFD is 400 to 450 near the top of the plant. DLI is 27 based on 20 hours on and 4 hours off. Late night checked PPM 375. Added 10 mL of Micro Grow and Bloom nutes. PPM is 810. Day 28 - PPM is 775. The plant is getting huge. The stock is about as thick as a Bic lighter. Plant is 13 inches tall.
Likes
37
Share
Growing nicely! Second set of true leaves are forming, still only giving RO+Tap water to 160-180ppm Watering a bit more thoroughly instead of just the top inch. Got my sponsored setup too! Loving every bit of it! Thanks MarsHydro & AC Infinity ❤️❤️
Likes
13
Share
@goeser
Follow
I love this strain. Really strong genetics. Nice fruity and og kush like smell. Cant wait to harvest and try them.
Likes
9
Share
@NONSENSE
Follow
Good day everyone, 3 days ago I harvested the Pineapple express. I can say only one - this was VERY fast grow. The fastest one I had ever. So I know why - Fast buds genetic DWC simple system I can not say anything about the strain yet, but the aroma is amazingly sweet and fruity. The buds are fully covered with the white crystals. I will update the DRY bud weight within 1 week the smoke report. Good luck
Likes
2
Share
Nothing serious topped dressed with power bloom Gaia green going to flip in day or two
Processing
Likes
7
Share
@Reaper
Follow
i can see a few purple tints coming at the budsites (day 36) no nutrients, just rainwater with calmag all the way
Likes
29
Share
Die Woche ist sehr gut verlaufen ich dachte eigentlich sie stirbt aber sie hat sich sehr gut erholt nach dem ich die Nematoden hinzugefügt habe man kann es gut erkennen da wo ich getoppt hab kommen und zwei weitere Köpfe und die neuen Blätter die wachsen sind wieder schön grün und saftig Sie ist nun auch in der zweiten Blüte Woche beziehungsweise der elfte Tag dann schauen wir mal wie es weitergeht.
Likes
15
Share
Seems to be taking well to being moved to the 5gal pot. Growing a lot faster after the 2nd day in the bigger pot. Watered for the first time since planting in big pot after 5 days with 1L distilled water (Ph 7) mixed with 1/2 tsp. fox farms grow big and 1/2 tsp. big bloom. Since my soil is considered hot soil I wanted to use less than the recommendation on the bottle.
Likes
7
Share
@MrPott
Follow
Trying out another sativa. Hopefully more luck this time around. Things are looking much better than the previous ones (Selena and Halle Berry). Let's hope for the best!
Likes
8
Share
@Bncgrower
Follow
Harvested today, truly strong smell, cultivation was absolutely perfect from start to finish. Very happy with the result, anxious for the drying and curing process! Thank you for following along.. 🤜🤛🌱🌿🌲
Likes
1
Share
We’re in the midst of the bulking phase now, with a few buds stacking up nicely. Unfortunately, the plant on the left has sparser bud distribution. Compared to other auto genetics, these three plants also show a broad variety in growth structure and phenological traits. Also, overall plant health isn’t entirely satisfying, with high temperatures being the Main cause. The leaves are showing several stress-related issues like mild tip burn, nitrogen deficiency, and some cal-mag problems. But hey—we’re here to grow buds, not leaves! 😄 That said, the fade is to be expected as the plants start to cannibalize themselves for nutrients. The stretch is also in its final phase, so we’re likely 3 to 4 weeks away from harvest. --- Quick rundown on everything else: Watering: 1500ml every third day Fertilizer: According to the BioBizz schedule Light intensity: ~1000 PPFD VPD: ~1.62 kPa Temperature: ~28°C Relative humidity: ~55%
Likes
7
Share
3/28/23 Keep finding pm in different places and having to spray it down. Added a few more fans just in case and it’s just everywhere. I think I’ll need to do a full tent clean before the next run to get everything clean. I trellised the ackbar twins. They’re huge and putting out so much bud. Took awhile to get it all right and ended up bending a few branches but I have a feeling it’s gonna be great when it’s finally done. Blueberry got topped and is starting to grow exponentially. Hoping it will have some stretch to it when it gets its chance to be the canopy but I don’t think it’s gonna be the plant that ackbar is because it hasn’t gotten proper light. White widow is flowering as well but it’s so minimal because the plant is also getting no light. Going to let it run its course but it’s just not getting what it needs at the bottom of the canopy. I should’ve known better but putting too many plants in one box but I didn’t know they would get this big.
Likes
24
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme. Das wird die letzte Woche für sie . Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent
Likes
3
Share
@SWITCH420
Follow
Hi folks, I'm coming here to start the process of ending this grow journal. I harvested about three months ago and the weed is definitely cured. Photos are about to come — I'm doing a real studio photo shoot for those buds, they deserve it! While waiting for the shots, I made some pretty damn dank hash temple balls using the iced water extraction method (solvent-free) with my little washing machine. It's a mix of the 8 strains I grew here — never ideal to mix different kinds of resin... but man, this is some serious dedicated work, so I'm making myself happy with that 14g shiny temple ball in the end 😉 Here are a few details about my process for you guys (and don't forget — you can do it with fresh material! Fresh frozen is always tastier. Also, the drying process is much more efficient and faster with a freeze dryer, but... you need the budget for that. I don't, so I go with the air drying method — check it out below): 1. Get your dry trim, then cure it properly for at least a month (I did 3 months). Smell it — mmh, sweet, dried to perfection. ✅ 2. Freeze it, delicately wrapped in a freezer bag. 3. Let a large amount of tap water sit for at least 24h to remove chemicals like chlorine, then use it to make plenty of ice cubes — don't be shy, especially if you're not working in a cool environment. 4. Prep your washing machine: add trim between two layers of ice, fill up with clean water (as much as you can, large vortex is better than a smaller one), then make it seat for 30 min (45 min for thicker buds) the time that the dried green material gets wet again. 5. Prep your filtering tools: catch bag, different mesh bags, spoon, etc. 6. Wash as many times as you can before green contaminants appear, as these lower the quality of your hash — don't hesitate to go up to 8 to 12 washes if the resin still looks clean! Important: each wash has its own specific duration, and they get progressively longer as you advance through the process. Frenchy Cannoli (a true hash legend) provides a detailed timetable for this — from as little as 30 seconds to 1 minute for the first wash, all the way up to around 25 minutes by wash 8. Make sure to follow that schedule rather than using the same duration for every run or running it too long the first wash !! It could breaks to quickly your precious material before you collect all the trich's and the quality would be lower in the end. 7. Collect the wet resin in the mesh bags with a frozen metal spoon, make patties with the resin, and let them sit over some towels in order to drain as much water as possible (place a tissue made for hash collecting over the towel). 8. When the patties are a little dry to the touch, wrap them as they are in the tissue and place them in the freezer for 48h or more. 9. With an iron strainer, microplane your patties over the biggest flat surface you can get! It's important that your micro pieces of hash dry widely and don't get too compacted. Any failure in the air drying process will nucleate rot, ruining your hash in the end and making it a poor product — eventually something to throw away. Sad when you think about all the phases of the process to get to this point! 10. So, in order to air dry properly, you must — it's not optional — lower the RH of your dry room to 35% or slightly below, never above and let it dry as long as needed until the material feels like dry sand. For myself, I found 10 to 15 days is ideal. The room must be very lightly ventilated (not directly on your resin!) and in complete darkness — the goal is to preserve all those delicious terpenes! Ideally, temps around 60°F or 16°C 11. Now that it's dry, collect your resin with a large thin spatula! Make a little mound between two layers of PaperHash, boil some water, and fill up a wine bottle with it! ⚠️ From this point on, to avoid exposing your carefully dried resin to a more humid environment — which could ruin all your hard work — everything must happen in the same drying room. Keep working at 35% RH until your temple ball is tightly and airtight wrapped in PaperHash. (And don't forget to drink water — it's dry in there! 💧) 12. Start to slowly press your resin. Magical moment. Finally.... 13. Press 3 times for 10 to 15 minutes in order to really decarb your hash — because that's what it's all about! Between each press, try as best you can to shape a patty... until the final press, when you'll be able to form that magical shiny temple ball (it only shines with gloves on, guys 😄) 14. You are now allowed to try it — for quality control purposes only, of course! 15. Because you want to age your hash for the sweetest 5-star smoking experience: wrap your temple ball in a large piece of PaperHash — if you can get that brand it's ideal, or another kind (check https://thepressclub.co) as long as it's organic! 16. Place the wrapped temple ball in a glass jar and store it in a dark, cool place. 17. Wait a minimum of 3 months before opening it. 18. Open, smell, touch — you'll be amazed. Roll it up with some weed or tobacco or both (I do both) / Or get a Hooka... you are smoking some true primo aged hash made by yourself! Taste the difference and realize all the path from choosing the seeds online until this first amazing puff ... 🙏 I want to credit my inspiration for making this kind of hash to the great Frenchy Cannoli, who has shared all his knowledge through amazingly rich tutorial content that you can find online with a bit of searching. 😉 Peace Frenchy 🕊️☮️
Likes
41
Share
@Mastr
Follow
1 plant start flowering day 26 and another one day 28 I feed them 1.5 L nuts everyday hope they grow without issues 🙏 Day 34 and seem everything OK Update Day 35 and both plant seem very happy I stop nitrogen and slightly go up with bloom I done today defoliation and cut all lower buds and I don't touch her anymore I feed her with 1ml silica .5 cal mag 2ml activera 2ml heaven 1ml bloom 1ml topmax Ph 6.4 Ppm 800
Likes
20
Share
Nach ein paar Schwierigkeiten am Haus die nun beseitigt sind geht es nun nahtlos weiter 👍 Diesmal in Blütewoche 3 zum Start gleich mit dem Infrarotmatten Upgrade von Calorique 100x50cm (110w) in Verbindung mit Thermostat das nach Feintuning nun gut eingestellt ist was man auch direkt am Durst der Damen merkt 😁🤚 Es geht mit Blühkomplex von hesi weiter und teilweise auch mit Alfa Boost bei Bedarf natürlich pH angepasst Und der kleinen Reihe an Plagron zusätzen wie zum Beispiel CalMag Es wird bald radikal entlaubt(für meine Verhältnisse 😄)und auch kleine Triebe werden weichen müssen da ich es versuchen werde flach zu halten und das Scrognetz als Stütze nutzen werde/möchte 🌝 die Mutti wurde aussortiert aber ihr geht's gut in ihrem eigenen "space" Die infrarotmatte steht mit einem von mir angefertigtem Lattenrost🤫😄 in dem 120er Zelt naturbelassen Fichte unkompliziert aber für die Wärmeverteilung und erhalt super 👍 ( der Geruch erinnert etwas an die alte NDL Zeit/Hitze im guten Sinne haha. Die LEDs laufen mit etwa 500ppfd gleichmäßig auf beiden Seiten und werden die nächsten Wochen langsam nach oben geschraubt 💫. Es geht entspannt weiter bis dahin 🌱👍? Liebe Grüße 🌿