Likes
Comments
Share
09/14 gave big pot its last strongest feeding at 1930 dropping those numbers big time this week. Watered small pot. I need to take readings and see if I need to do a flush or not by six the small pot was droopy it was a hot one today fed it 1060ppm 09/15 watered small pot this morning measured runoff at 399ppm so no need to flush that one will check small one tonight when I water small watered small pot 09/16 fed big pot this morning 1280ppm fed small pot 1110ppm 09/17 watered both big in morning small at night. 09/18 fed both this morning 1190ppm trying to not have to water when I get home at night. Little pot wasn't dry at all but oh well 09/19 watered both this morning 09/20 fed both 1160ppm
Likes
26
Share
@Roberts
Follow
I am cutting G13 autoflower down today. She has run her course, and is ready to be harvested. She has a strong layer of resin with a woody, skunk, sweet, and fruity aroma. She grew well considering the issue I had early, especially after the mite treatments. We beat them, and she finished well. She will hang dry for 24 hours then get a mild wet trimming. From there She will go in the cannatrol for 8 days. Then I will final trim it, and do a smoke report. I want to thank Medic Grow, Athena, and Weed Seeds Express. 🤜🏻🤛🏻💪🏼❄️🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
55
Share
@Max1973
Follow
Day 79 - Another week passes, not much to post, normal feeding, 1000 ppm 6.2 PH, normal lights, the girls are fattening up nicely...... 😎 Day 84 - some pics/vids.... pics of a Test Bud (ready for curing)......doing some experimentation..... read up about drying and curing, but i don't have a set method, so test abit..... never grown bud before..... 👍 my tent is really small, i think 50x120x160 or something... and it's tight in there, i have no other source of herb, so i'm going to start getting into the smaller one, and focus the light on the larger one..... i've been trimming and drying all during the grow.... there's really only enough room for the big one, and it's really squishy in the tent........ 😎
Likes
4
Share
Hello & good morning. This lady has been hanging tough out here with this high desert sun and winds. It'll take some time to where ill be in a place where I can grow fully outside with full potential & protection. I think I should of vegged her more before bringing her outside. But that's what and why we are here to learn and keep getting better! Shes doing great starting to thicken up on us.. Excited to see how thick she'll get on us! Feeding more sugar today! As always irrated ph balanced water!! Awe yaaa much love, Diamond Belle 💎 Beanpatchseeds.com
Likes
75
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 We updated the diary to 3rd week of flower, we had our timeline a little messed up but back on track.. This plant has been eating a ton, we feed with every watering now and there's been no protest..if fact we may increase due to light shade. The FC-E6500 is an absolute beast of a light, I'm so happy my husband finally made the purchase for us..with lower power consumption and higher yields; this light will pay for itself shortly. We've been talking about also getting a 5x5 so we can utilize its full light footprint... ..You might notice a cheap "blurple" LED hanging from the scrog table,we hung it there to add some weight. If its not clear to tell from the photos, this plant is completely overgrown, we definitely let this go for far too long but I'm excited to see what kind of yield we'll get (this is our highest yielding strain by far).. I would be shocked by anything less than 1lb.. We've had the FC-E6500 at 50-75% for the first 2 weeks of flower, we're leery on distance still and didn't want to chance burning but with no signs of stress we decided to move it up to 100% today and we'll monitor colesly for a few days.. We run 3 tents but temps are awesome since dumping all the HID in that room, this is something we should have done years ago..things are going so smoothly and we couldn't be happier..Thanks as always for dropping by and happy harvests everyone!! ❤️❤️❤️ ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ 8/17 She is sooooo overgrown lmao 😹.. Josh gave her a haircut yesterday to thin her out some..we have no idea how she'll finish but I think a trellis net is in her future.. we have the FC-E6500 at 100% strength now and no signs of stress or burning to this point, this light is simply amazing..we may purchase a 5x5 so we can utilize its entire footprint..things are going awesome (albeit messy) but we'll update if anything changes..thanks Growmies, much love! ❤️❤️❤️ ⚡Mars Hydro/FC-E6500⚡ Specifications ⚙️: 650 watt, full spectrum design, removable light bars and driver 🔌 Diodes: BridgeLux chips (3978 count!) Veg Coverage: 6x6 ft 🌱 Flowering Coverage: 5x5 ft 🌼 High-Efficiency PPFD: 1200umol/m²/s ☢️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
20
Share
@GR0WER
Follow
👋Hello, my friend!👋 If You reading this, sign up to my profile, I will be pleased! I download new photos and comments updates every day! It will be nice to walk true this grow of my two Fast Buds 'Banana Purple Punch' auto flowers together! I asking a lot of grow questions and take part in a life of this grow community. New week starts! 🌞28.11.2022 Today I came home and saw my smaller one showing four stigmas in the upper knot. I was afraid of she already starts flowering, but mates from 'Grow questions' made me kalm, answering that she's just showing her gender. It's too early for flowering and thet's how all autos do. Thank You, my friends, You've saved my nerves (as usual). I have watered my girls with full pack of GHE nutrients, including 'GHE Diamond nectar' and 'GHE Mineral magic'. Solution ph: 6.0 Drenage ph: I forgot to drain vater from pot's bottom and after four hours it was gone. So I'll measure it next time. I've done some more LST and sprayed them with 'GHE SeaWeed'. 🌞29.11.2022 Today I asked one more grow question: 'Why all new brunches on my autu flowers has triple fingerd leaves?' Mates told me it's a fault of my substrate Ph and I can do some flushing to fix that. I took one on my girls (#1) and made this procedure deeping a whole pot in a bucket with 10 liters of ph5.9 water. Maybe it's some kind ob a black magic, but it did NOTHING. Inflow: ph5.9 Outflow: ph6.7 Substrate ph after 3 procedures: 6.9 I gave up. I'll not doing this to #2 and let them grow in that cursed substrate till the every end. I made small defoliation after all of this to bouth of my girls. Lowest leaves (first floor) was cut with a brunches growing from it. Also I cuted one fingered leaves of a first week. Results are on downloaded photos. 🌞30.11.2022 Photos downloaded. Mb its my mind tricks itself but I noticed #1 starts growing faster after flushing. It was smaller than #2 and now it's almost the same size and even looks thicker. Tomorrow we'll see it more closely and I'll flush #2 if it's true. I watered #2 with full pack of GHE and sprayed them bough with 'GHE SeeWeed'. Also my BPPa#2 showed her gender today (stigmas on a upper knot). Yep, we have a girl here! 🌞01.12.2022 It's a 'rest day' today. Nothing to wright. (Photos downloaded) 🌞02.12.2022 I made some LST and sprayed my flowers with 'GHE SeaWeed' solution. Substrate ph rised by ph0.1 and now it ph7. It's critical already, especially when my BPPa#1 starts to show stigmas everywhere - almost in every knot. I think pre-flowering starts soon. She looks soft and wobbly, I think there is a deficit of some elements. But my substrate still wet, and I can't do anything. Tomorrow I'll make them both to bath in ph5.5 nutrients solution - and it's only thing I can imagine to do now. Relying on the best, waiting for tomorrow. 🌞03.12.2022 Today I watered both of my plants with 'GHE' nutrients (TriPart + Fulvic acid + Roots stimulator + Selicates) and sprayed 'GHE SeaWeed' on the leaves. Also, I think I finally resolved my cuestion: 'Why ph of substrate don't want to go down?'. I take my water from kitchen crane, it has ~ppm110 and ~ph7.5. But clorine in this regular water slowly makes the reaction with asid I use to low it's ph. And slowly but surely ph of solution rises. I noticed this by making ph5.8 water and waighting 24hrs - ph of solution became 6.7 the next day. My previous grow I used distilled water only and thet's why I didn't know about this problem. It's a pity I made this guess so late. But it's better late then never. From now I will make ~ph5.2 water immediately after watering and it will react till next procedure (2 days). It's ph should rize above 0.9-1.0 by this time and become near ph6.0. I already prepared water for the next feeding - clear, without any nutrients (by now) and ph5.25 on it's start. Today my solution measurements looks like this: - Substrate ph before watering: ~7; - Solution ph: 5.8; - Solution ppm: 680; - Solution EC: 1.1; ... - Substrate ph after watering: ~6.9; - Drenage ph: 6.7; - Drenage ppm: 710; - Drenage EC: 1.03. 🌞04.12.2022 The 'rest day'. My experinent with water ph was sucssessful. Now I know how to treat usual water to feed my flowers correctly. My next grow will be nearly perfect. And also, it's my first (and last) grow using autoflowers seeds. I don't like a grow process ether a future results. Regular flowers are what I can grow the best. So I'll stay on a 'photo' side of a force (after this auto grow ends). Week ends.
Likes
3
Share
@CreoWeed
Follow
This week can be simplified as EXPLOSION!! The plant doubled in size and I can see many main branches now, which is pretty awesome!! This is exactly what is LST is for, right!? I am pretty amazed for seeing this explosion in the 2nd week of flowering and cannot wait to introduce the booster when flowers are going to be a little bigger, in around 6~10 days. Now I'm keeping training her for at least 5 days, and then I'll stop so she can focus on flowering. At the e moment I'll stop training her she will also be able to have more space for herself in the tent as the other plant are going to be chopped pretty soon (other diary updated). So stay tuned and stay high nice people! Cheers!
Likes
46
Share
Day 21: So we are currently in day 21, I finished all my work for my growroom. They where pushed into flowering 5 days ago. They always need to settle first before even turning into that stage. So my gues that in the end of the next week we will start to see the first indicators. I still gave them veg nutrients this week since they are still in growing stage. I did notice that many plants have weak stems and where sloppy underneeth. Didn't liked that, so in order to have thicker stems and branches I decided to top all the plants ( not showing in these picutues, i did that after making the pictures) Topping your plants will create stronger thick stems and branches! Also removed the first 1-2 internodes on each branch. I kept 5 or 7 branches each plant. I can't remember the ''science'' behind it but I have been told that many years ago by fellow OG Dutch growers and Family members. Anyway It is importend to have uneven branches. So 5, 7 or even 9 but never 6 or 8. Normaly I would have loved a huge main cola and it is known by many amnesia growers to not top the plants because they make beautifull thick main colas. On the other hand, when having this much plants on each m2, it will create weak stems and branches. I rather have strong plants with thick stems and branches to transport all nutrients properly and not breaking when having buds on them or having to mayor support them. The leafs, stems and branches look fine to me. No stress or deficiencies. 1/3 of them like to drink thought which is a good thing but it really enjoying. Now I have to weigh by lifting the pots which one needs more or less feedings lol. Instead of giving them all like 5 seconds of water. Might show you guys my feeding ''barrel'' next week. It is a 250L one. Untill next week.
Likes
2
Share
Likes
37
Share
@MG2009
Follow
10/05/2018 I'am thinking about 2 weeks out ?🙏 Cooler weather coming soon, buds starting to swell up i believe. #2,and #4 are the only ones to get any mold. All others are clear of any sign of mold. Number 1 seems to have more of the ghost 👻 train haze smells a!most identical to it but a little something different.Brrrr it's 41° out , now it's 39° Ps I think #1 will go 70 -78 days 10-11weeks? Potted plants will be at 63-72 days but just a guess the trich's will tell me when.👍
Likes
31
Share
@Canna96
Follow
Hey now, this week went very well. I transplanted her on day 16 and her leaves were praying as soon as the lights came back on. I still have the Spectrum X in V1 at 30% which is doing an excellent job of keeping her low to the ground with nice tight nodes. She is only six inches tall and pushing her 6th node on day 21. I transplanted her into a mixture of Coco Coir and Perlite and set up an auto watering system that is currently feeding her 4 times per day, Once at lights on, and then every 5 hours thereafter until the 4th feeding, then it repeats at lights on. I will top her just above the 6th node as soon as I have room between 6 and 7, which will hopefully be in the next several days. I know some people don't agree with topping autos, and I would certainly agree it's not the way to go in all setups. However, when utilizing high frequency fertigation in coco coir it is absolutely necessary. The issue is vertical growing space if you are growing indoors, as outdoors this is not an issue. I use a combination of LST, topping, mainlining, manifolding, and super cropping to try to keep my plants from growing into the lights, but it can still be tough especially when growing Sativa dominant strains. Hopefully I can top her above the 6th node but that will depend on how many nodes she pushes out before starting to flower but I think I will be fine. I will begin LST as soon as she recovers from the topping which typically takes about 24 hours. I am definitely very happy with this medic grow led so far, I have not even started the UV/IR spectrum but I will be in about 1-2 weeks as soon as these last two seedlings hit veg. I hope everyone is having a great weekend, Stay Safe and Blaze On!!! 💪💪💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled
Likes
15
Share
Last week of veg for those girls ! I defoliated a bit 5 days ago and im planing on switching to 12/12 in 5/8 days ! They are happy tho 😁. What are ur thoughts guys ?
Likes
24
Share
Flowering: Week 10 since 12/12 change, Week 8 after 1st pistils, Breeder states 9 week flowering period 11/24 - Trichome Check - roughly 95% cloudy, 5% clear, few random ambers, will check again in 2-3 days, but definitely starting to mature 11/28 - Trichome Check - roughly 95% cloudy, 2% clear, 3% random ambers, will check again in 2-3 days, shooting for 20-30% amber NOTE: Included picture of 2nd Blue GSC I've been growing side by side with this diary. The 2nd plant was planted 3 weeks behind the plant seen in this diary and only had LST with no topping. The plant actually surpassed IMO the one I've kept a diary on and I'd have to attribute that to a combination of not being topped and a slightly larger pot giving it more room to grow. NON Nutrient Watering: 1500ml of 6.2ph Water every other day now until harvest PS - I really appreciate everyone's kind comments and likes!! Thanks for stopping by and checking out my grow :)
Likes
184
Share
Germination date 🌱 12/07/2021 Day 120 12/11/2021 Strain 🍁 SinCity seeds YUZU SORBET (Purple yuzu x whitenightmare) THC% • Unknown 💡 Mars Hydro FC4800 • Power draw 480W + 5% • Max coverage 5 x 5 • LED 2070pcsSamsungLM30B1&Osram660nm • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver +2m cable • Daisy chain (multiple lights) https://marshydroled.co.uk/products/mars-hydro-fc-4800-led-grow-light-samsunglm301b-commercial-greenhouse-medical-indoor-kit 🇬🇧 https://www.mars-hydro.com/buy-fc-4800-480w-4x4-energy-saving-full-spectrum-commercial-led-grow-light-mars-hydro-for-sale 🇺🇸 PROMO CODE • (ORG420) DISCOUNT 👍🏻 marshydroled.com ⛺ Mars Hydro 120 x 120 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients GreenBuzzLiquids Organic Grow Liquid • 1-4ml until 2wk flower Organic Bloom Liquid • 2-4ml flower stage Organic More PK • 2-4ml +wk3 of flower Organic Calmag • 1-2ml/lt whole grow Fast Plants Spray • first 3days at night lights off More Roots • 2-5ml veg +2wks flower Fast Buds • 5ml +wk2 of veg until 1wk flower Humic Acid Plus • 2-5ml whole grow Growzyme • 2-5ml whole grow Big Fruits • 2-5ml flower stage Clean Fruits • 5ml flush 1wk Ph powder Root Gel Living Organics PROMO CODE • organicnature420 15% off ✌️🏼 https://greenbuzzliquids.com/ 🥥 Growing Media • Coco Coir Notes 📝 This one skinks. Alot like tangie so will have that taste. Unfortunately lost abit to mold but not enough to cry about. Great exclusive Strain from sincity, will certainly pop the other 2 in the future. Hanging up with the other girls. 15c 60% perfect ✌️🏼💚 Discount codes for GreenBuzzLiquids and Mars in bio 👍🏻 Happy growing fam ❤️🌱🍁👍🏻
Likes
18
Share
July 5 - The girls are still doing awesome. temps are between 21-26. Humidity is 40-50. Still feeding every 24-36 hours with 3L per plant. July 6 - They are doing good. Showing lots of flower sites now. Unfortunately I did not get any pictures today. July 7 - Tons of progress since last week. I don't see any signs of any problems, and still no pests! The smell is getting A lot stronger as it starts to flower more July 8 - Still doing there thing, no problems, temps and humidity is fine. Have been feeding every 24 hours now as they seem to be really thirsty July 9 - Super happy with how they are doing. No issues yet. Smell is heavier, and tons of bud sites showing up. Only issue is they are growing pretty uneven. July 10 - Time to get a even canopy! First time doing some HST. I also did some defoliation. One of the stems split open a bit but it seems to be doing just fine. I did he HST and defoliation in the morning, i then took pictures of 12 hours later and everything seems just fine! July 11 - Everything seems to be a lot more even and the broken stem doesn't seem to affect the growth.
Likes
128
Share
Hola 🐴 Skipped one week because nothing happened that much. Soil i replanted it was pretty low on nutes and suffered a bit deficiency. Watered only with water after replanting. Now it had 4l of 1.7ec and it looks great. One or two weeks more before bloom. 4 Sisters still hanging at corners but not for long time. And for Hologram i made video about LST. not about how much at the time. Weekly a bit is good. Thats why easily adjustable ties are godlike thing. And PATIENCY. With High Hopes 🍀
Likes
8
Share
🌿 Week 11 – Harvest! (Day 77) Harvest time for my Tropicana Cookies Auto — 77 days from seed to chop. Instead of giving her 24–48 hours of darkness, I decided to harvest right in the middle of her light cycle to preserve maximum THC and terpene content while the resin was at its peak. Trichomes were mostly cloudy with a few amber — exactly where I wanted them. The buds came out dense and sticky with a deep citrus aroma and colorful hues. Final wet weight: 300g, expecting around 60–75g dry after a slow cure. She’s currently drying on mesh racks in a dark, ventilated space with ~21°C and 55–60% RH. I’ll jar her up once the stems snap clean. This was a compact but resin-heavy pheno — rich in terpenes and easy to grow. Really happy with how she turned out. Thanks for following the grow — time to cure and enjoy the results! 🔥🌱
Likes
18
Share
Seedsman Seeds Germination Report - Run 01: The White OG Journey Kickoff to Germination: The Start of Something Great! Welcome to the beginning of this adventure with The White OG feminized seeds from Seedsman Seeds. Excitement is in the air as we’re searching for strong, resilient plants, and this journey has all the best tools and tips. Starting with five seeds, we’re aiming for a solid beginning and maximum potential. Let’s explore every step in detail to make this grow as robust as it can be! Germination Process: Tools of the Trade TheCannaKan: The Ultimate Germination Gadget I’m thrilled to share my love for TheCannaKan, a little germination wonder! This tool is essential for any grower who wants to start their seeds with precision and care. I noticed rapid results in just 24 hours, with the seeds showing signs of life. At about 32 hours, I transferred them to the Root Riots, which brings us to the next exciting stage. Why I Love TheCannaKan: • Quick Results: Seeds sprouted rapidly, minimizing wait time. • Consistency: Keeps moisture levels optimal for uniform germination. • User-Friendly: Simple yet effective for both new and experienced growers. Root Riots and Their Role in Root Development After sprouting, I placed the seedlings into Root Riot cubes under a dome. Root Riots are fantastic for stabilizing young plants, providing an airy and nutrient-friendly environment that promotes robust root growth from the start. Benefits of Root Riots: • Root Aeration: Soft yet structured, these cubes support root expansion. • Moisture Retention: Holds just the right amount of water for growing seedlings. • Enhanced Root Health: The cubes are ideal for preventing damping-off and ensuring healthy, white roots. Nutrients to Kickstart Growth: Aptus Holland Regulator and Startbooster To give the seedlings a perfect start, I added Aptus Holland’s Regulator and Startbooster (1ml/L each). This mix promotes early root and stem strength, giving seedlings the ability to absorb light and nutrients more efficiently. • Aptus Regulator: Enhances plant resilience, aids in nutrient absorption, and promotes early vitality. • Aptus Startbooster: Adds a balanced mix of growth hormones and nutrients that are ideal for the early stages, encouraging healthy roots and faster seedling growth. Light and Environment: Future of Grow FOG LED with TrolMaster Tent X Controller I’m using a Future of Grow (FOG) LED at 600W, but keeping it dimmed down to around 200 PPFD. This setting is controlled by the TrolMaster Tent X Controller to give the plants the perfect start without overwhelming them with intense light. Controlled lighting helps seedlings to develop without stress, encouraging healthy growth and internode spacing. Shoutouts: • Future of Grow LED: High-quality, efficient LED light that adapts well to seedling and veg stages. • TrolMaster Tent X Controller: Reliable and intuitive control over light, humidity, and more. Perfect for a hands-off, efficient environment setup. Observations: One Seedling Takes the Lead At the end of this germination stage, it looks like one seedling has emerged as the strongest, while the others may need a few more days. Patience and observation are key; some seeds naturally take a bit more time to sprout. I’ll keep monitoring these with hope, allowing each seedling its own rhythm. Grower’s Notes and Tips • Consistency Matters: Germination is all about steady conditions—consistent moisture, gentle nutrients, and stable lighting make all the difference. • Document Everything: Keeping a log of each step (like this one!) helps track growth patterns and provides valuable insights for future grows. • Stay Positive and Patient: Not every seed will sprout at the same rate. Trust the process and remember each plant is unique. Community Shoutouts Thank you to everyone who makes this process smoother and inspiring—TrolMaster, Aptus Holland, Future of Grow, and Seedsman Seeds for amazing genetics and tools, as well as the growers’ community who share insights, tips, and encouragement along the way. Next Steps Now that we’re through germination, we’ll move into the early growth phase. I’ll keep documenting the lighting adjustments, nutrient changes, and growth patterns of each plant, especially that eager seedling leading the way! Growers Love, and here’s to a strong start for the future of this grow! 🌱 DISCOUNT CODE - SeedsmanSeeds - DOGDOCTOR 10% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚

 Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All and remember to keep that smile big and alive 💚