My nine Week 7 flowers are thriving under the new GrowPro Solutions under-canopy lights. The lights have really brought out some amazing colors in the buds. It's so cool to see how much they've changed in just a day! I'm excited to see how they develop even more in the coming weeks

girls smell sweet and are stacking like right on top of one another. I had to splay her out and thin some leaves to ensure good airflow. This is the Wedding cake XL so I am starting to see what the buds are going to looks like on this one. Can't get over the fresh sweet smell.

Tag 24 !

Shit got out of control, i had to perform an LST to keep the big sister under control and she is the biggest plant I’ve ever grown although She is developing buds everywhere and im not really sure but for me this is bad as i think sometimes less is more, its clear that the plant just can’t distribute the same nutrients on 10 buds/20buds, so i expect them to be soft and not potent, maybe THAT xxl pheno, im sure someone else could have get even more, shame that I can’t clone her Little sister is looking so nice tho, Perfect structure, just amazing looking and beautiful to its maximum

She's looking lovely this week! 😍 Also..... she is absolutely huge... 😲

FLushing, may do 2 weeks.. smell is so gooooood !!!!!!!!!!!!!!!!!!!!!!!!!!

Day 56: nutrients like plan Last feeding Pictures are taken on day 56 --------------------------------------------- Nothing to say, she is growing good👍 Happy growing 🕷️🌱

3/14: Came back from a 4 day vacation to a lot of dry, wilted, dead leaves on Amnesia. Trainwreck is super starved as well. My automatic watering system didn't kick on, and the humidifier ran out of water within 24 hours, so there's that. It may be for the better though, as the PH of the nutrients had risen to 7.5. I tossed that mix, and made another 2 gallons of half strength nutes, molasses and epsom salt. I watered them both to runoff, and now I'll wait for Amnesia to prioritize which leaves she thinks are worth saving, and then I'll defoliate the dead ones. Hopefully trainwreck will just bounce back to green. She needed to be defoliated anyway, so this situation makes it easier for me to find the dead leaves. Edit: Came back to feed the last of the nutes and decided to pluck the crispy goners. I found that pulling the leaf stem downward will make the most dead leaves fall right off, allowing me to test a majority of the leaves and give Amnesia a major haircut. Luckily I left a lot of leaves from prior defoliation, as Amnesia REALLY sucked them dry. 3/15: Amnesia looks no worse for wear than last night. Trainwreck as well. Went ahead and pulled as many dead leaves off Trainwreck as I could. Some leaves were a mix of crispy brown and healthy green, which I think is pretty goofy, so I avoided taking any green fans but removed the crispy ones. The colors of the leaves around the buds are really fun to look at. 3/16: Amnesia is starting to SHED her dead leaves, allowing me to pick the leaves with almost no effort. I tested as many leaves as I could, giving another haircut. I would say this isn't a good thing, but since it's my first grow, I'm rolling with it. As long as Amnesia keeps the buds and its nearest leaves alive, it will slowly grow, albeit stunted. I'm not sure if this condition will cause it to finish sooner, but I'm going to need to watch the trichomes under a microscope every couple of days just in case she's ready for harvest. Trainwreck looks about the same as it did before. No new leaves are ready to be removed there yet. 3/19: Amnesia is still shedding leaves, but also bulking up. Trainwreck is slowly bulking up, and turning purple as well! Going to keep an eye on Amnesia's trichomes. Edit: because amnesia is yellowing so much, and because it's been 5 days, I'm going to feed both plants a quarter strength nutrient mix just in case I've been overfeeding them somehow.

Been a little busy with transitioning to Cali Baby. Forgive me

Colas have increased in size, still looking to develop more mass, trichome production does not seem as abundant as some grows i have done but this strain has only an 8% THC content and a higher CBD ratio. Increased nutes strength by .25 pml to .75 pml. Pistols are still standing upright so no sign of them being ready for harvest, will be studying the trichomes for any amber changes in the next week of flower. The fragrance is getting much stronger and is very fruity and pleasant, unlike most ganja aromas that can be strong and dank, this grow has a very uplifting fresh Bubblelicious scent.

Another week gone and we have another problem... Trips god damn.. took all the plants out yesterday and sprayed them with neem oil so i hope that it fixes the problem because we are reaching the end of the grow this is a big freaking royal pain in the ass and i wish i didn't have to deal with it but what you gonna do check out the pictures you can see the destroyed leaves no further changes in the nutrients but we have slightly high humidity but that is an easy fix just keep the door open so the only struggle now are the trips any advice is very welcome Talk next week cheers, Nibameca

Day 81 - Rock machine & Doctors Choice #1 getting cut down today! I am so glad I decided to let them go another 2 weeks because buds on both plants got much thicker the last 2 weeks. DC#1 has a strong fruity smell & has purple hues all over the bud & the Rock machine is caked in crystals and has more of a gassy smell! Can’t wait to see how they smoke, stay tuned for the harvest update & make sure to go check out Doctors Choice for some 🔥 genetics! Thanks for following & happy growing friends!🙏🏼✌️🏼🌱

Well what can I say... added a used LED light to the grow that I got for a good price as energy prices are quite high and getting more expensive. Going to upgrade the ventilation system as well, having the box in my bedroom is just unbearable with the current ventilation. High humidity at night above 60% causes me a headache, I am trying to reduce it as much as possible - hope the new system is gonna work better. Plants have a variety of issues, also I believe that they don't grow as fast as they should. Any help/comment appreciated!

Hey everyone, hope everything is going well for you all. Plants have been doing good since the last time posted, all three are working on their flowers. One CBD is purple, other is going to be green. Got the humidifier out of there for more space which has made things a lot easier. Need to supplement some P&K for the Colorado cookies, showing a little deficiencies. Other than that see you all next week.

ok,ok,ok I know ive been slacking. Today is day 84. And after pondering for a very long time, i decided to chop her. The trichs were almost 100% white with lots of amber scattering around. Id say about 20% amber. She really hasnt gained any size in the past couple days, just more color. As you can see, the color on her is insane. She will be hanging in an herb drier for the next week before i trim her and cure her. She smells like gassy lemon candy. Super terpy. I aim to preserve those terps by taking it nice and slow. Stay tuned! Ill add more pics as time goes on. Idk why the video i uploaded is white-washed. Boooooo!

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Starting autopot system and root aeration this week. Stay posted for updates. Day 1 You remember that movie "Training Day"? It's sorta like that. With a light trim for the buried leaves on lean. Day 3 continued lst, also some defoliating to encourage growth and light up the nodes. Day 7 did a final pin for the week. #5 and I had a tug of war, We both lost. Start somewhere other than the top when tieing. But otherwise I am real proud of my pinning and hope it's right on the money.

Ok so now I started with topping and LST with a smal SCrog. And switched it back to 175 watts and no feeding this week. only water.

Here we are in what it will be the final week... I am now at day 61 and I'm considering to cut at the end of this current week... in 2 days basically... I recently bought a scope that allows me to check the trichomes and I can see all milky ones, I also posted some videos of it, please guys let me know your thoughts... Beside this buds are hard like rocks and smell still pretty intense and I cannot wait to taste this short but bulky phenotype. I'll keep you guys posted if I harvest or not this week hoping to read some of your comments. So Stay tuned, stay high! - - - - - - - - - - - - - - Little update at Day 63. I decided to give her few more days, so next week will be chopping her, this mostly cause I watered her last time on Day 61 and now I am basically just waiting for the soil to be dry. I count to put her in the dark for 48 hours at Day 65 and finally chop her at day 67, I cannot wait to update you for the harvesting part. I expect to reach 50/60 grams dry and I really hope to achieve that. Keep you guys posted! Stay tuned, stay high!

This strain is soo delicious and it is exactaly what they say about it. Strawberries and pears. It doesnt even smell like weed lol. The taste is like the smell except it has a slight kushy dank skunkiness on the exhale. Highly recommended strain. Smells like real fresh fruit. It's very potent weed but it doesn't make me feel burnt out later so I smoke it all day.