Hi all 🧑‍🌾 Welcome to my 🍌💜👊 week update. Hope everyone keeping well and having a great week😁 Thank you so much for so much support on this bananas ride 🙏💜💚💜💚 Everything still going pretty well. Girls are developing and stretching like crazy. Athena currently Dec 14 90cm and main stem of Xena is not far of this height either. Unfortunately noticed first signs of calcium deficiency(my opinion) on Athena. Thankfully started feeding both girls with calmag weeks back but the dosage wasn't not enough for Athena. Started small treatment very next day on Dec 11 (see description below) I belive got my baby back on right track. Week 9 Dec 11-17 Dec 11 Watering was planned for Tuesday but due to calcium deficiency decided for a little treatment. Watered both girls with mixture of reduced content of growth nutes by 50% calmag at 1.2 ml per ltr. Reduced solution PH to 6.2 as apperently it's ideal for calcium consumption. Over period 4h I have watered Athena with 5ltr with couple runoffs. Xena 3ltr. Total of 7-10 leaves affected mainly at top colas close to the light. Dec 12-13 Purely observation and all looking well. Of course all affected leaves will progres of showing signs but good news is that growth and development booming and don't see any new leaves with symptoms. Very nice trichomes development in recent days and more and more colours. Dec 14 Second watering for this week 6.5l Increased calmag to 1.4ml per ltr and if still things will be looking well reduce to 1 or 1.2 on next feeding. Dec 15 Very nice respond on yesterday feeding. They definitely fatten over night and getting more and more frosty. Will need to remove some foliage soon as getting extremely bushy again. Dec 17 Xenas main stem top cola almost touched the light today. Tied her to left side of the cabinet, applied selective defoliation on both girls, tied few branches to netting and on the end of this busy day a third watering for this week. 7 ltrs beetwen both. Runoffs Xena PH6.4 Athena 6.3. Very nice week have to say. I belive that calcium deficiency on Athena is no longer a case here and both girls developing very nicely. Both are still stretching, buds are gaining in size and both girls started exploding with trichomes, Thank you all again for such amazing support 🙏peace and love brothers and sisters ✌️💚💜💚💜💚 Stay tuned for new week update 😉🧑‍🌾✌️💚

It's week five of flowering, and Divine Rapier continues to do very well. The buds are developing nicely. Unfortunately, the weather is not so nice at the moment, with hardly any sunshine and lots of rain. The temperature is only 19°C during the day.

Leaves started to go a little light green this last week so changed the water and added some Nitrozyme aswell as a slight mist direct to the leaves. Also had to lower the PH to 5.8 as it had crept up quite substantially at around 8.5. Other than that...Nice, healthy, bushy plants. Still a clear difference in size between the hydro and the Allmix. The netting needs changing as just can't get it taught so any recommendations appreciated. Itching to see the end result! Update 28th Feb: I think im getting a little nutrient burn on some of the leaves. Nutes have been added as per supplier directions Either that or it could be due to me spraying a little diluted Nitrozyme mix directly on the leaves a couple of days ago while the veg lights were running.

Okay growmies here we are at the end of our cream cookies by fast buds. It was such a pleasure to grow, i learned so so so much this run that will help me through the rest of my adventures. The beginning was tough as i am new i over watered and did not ph the water and what i mistake. But its okay i learned. She bounced back like nothing and produced these awesome buds and beautiful smoke for me. Watching her change colour and grow was amazing. It was topped and lst, she reacted amazing to it and grew more and more. Fast buds has not let me down. I cant wait to grow her again and see what happens next time! I washed the trim and made bubble hash with it! Pressed some of the flower to make some rosen!!!

Hey Friends, I just started my very first grow. Excited to see the outcome, Its a learning process, discovering new things everyday. Plant #2 growing rapidly, seed was very dark compared to others, does that mean something? On day 4 i noticed the leaf turning yellow on the borders, currently only feeding water, will keep an eye on that and do some research on the topic.

Awesome growth! Topped above the second node, then Mainlined to have 6 main nodes total through lollipopping. She was trained using LST, until week2 flower.

Die SFV OG Kush war schneller durch als gedachte. Wir sind jetzt in der 7 Woche. Bisher hat sie noch einen sehr grasigen Duft, bin auf das Curing gespannt. Updates folgen.

Welcome back!! It’s the beginning of week four. I now consider the seedling stage over and now we’re going strong into veg. Vamos!! FRIDAY - Day 22 11 October 24 - Topped both bottom branches. - Added a few LST staples to begin shaping her. - Just an other day under the lights. - Going to start thinking about up potting her in the near future. SATURDAY - Day 23 12 October 24 Watering day, 1 litres of dechlorinated tap water. - Base water 1 litre - 61.1 PPM Final - 1 litre at 6.45 PH at 62.8 PPM Runoff - N/A - Thinking of removing her giant fan leaves soon, they’re becoming cumbersome. - Did my final planned topping of the two top branches. - Now just have to give her time and continue shaping her. SUNDAY - Day 24 13 October 24 - Just a day under the lights. - She doesn’t seem too bothered by yesterday’s training. - She’s got a few days now to recover. - All is moving along according to plan. MONDAY - Day 25 14 October 24 - Just a day under the lights. - Also a good recovery day. TUESDAY - Day 26 15 October 24 Transplant day into a 5 gallon pot and her final home. 60% Gaia Green soil 20% Worm castings 20% Perlite 8 Tbsp Gaia Green All Purpose 4 Tbsp Gaia Green Power Bloom 5 Tbsp Diatomaceous Earth 1/2 Tbsp Dynomyco Amended it all and transplanted. Watering day, 5 litres of dechlorinated tap water. - Base water 5 litres - 61.2 PPM - Add 2.5 ml Cal-Max - 167 PPM - Add 5 ml Supermax - 200 PPM - Add 15 ml Miicrobial Mass - 300 PPM Final - 5 litres at 6.48 PH at 301 PPM Runoff - N/A - Removed the lowest fan leaves. - Removed LST staples to let her acclimate to her new home. - Will resume LST in a few days. WEDNESDAY - Day 27 16 October 24 - Just a day under the lights recovering from a big day yesterday, extended light hours and a transplant. - She’s looking perked up and pretty happy so everything is looking good. - Probably resume LST staples tomorrow. - I’m done with my planned toppings so from here on out it should just be LST until we flip to flower. THURSDAY - Day 28 17 October 24 - Ahhhhhh I tweaked a branch manipulating it with my gorilla hands. - It not completely broke off so hopefully she can repair it and recover. - Going to give her a bit more time to recover before restarting LST. - Just a day under the lights today. Well this is the end of week four. It was a busy week with the transplant, all planned toppings are completed and now it should just be some LST from here on out. Join me tomorrow for the beginning of week five. Vamos bendejos!!

CLAWING / WILTING LIGHT STRESS / OVERWATERING CLONES ARE LIVING THE LIFE MOTHER - DAY 92-98: • Problem: leaves point upward, curl downward - could be light stress / nitrogen or magnesium deficiency / soil pH • Solution: Switched to 450W LED, then 300W running at 25% power to reduce light stress, potentially causing clawing • Solution: Regular CaMg+ feedings in watering and foliar sprays • New LED, while less intense, generated way more heat: temp went up, RH went down • Soil dried out much faster; light watering on D92/93/94/96 -> overwatering, damnit • Growth upward picked back up on D97 • Hot temperatures probably freaked me out a bit and made me overwater, hence wilting, will wait / monitor pot weight D99: Clawing started disappearing. Seems like the 300W running at less than 25% intensity is much more gentle on the leaves. D99: Leaves feel like paper/dry / wilt -> overwatering symptom CLONES - D41-47: • A28 is vegging and growing much faster, bigger and stronger than her mother - will sample clones from her soon • A29 is in pre-flowering

Hey guys :-) She is growing great and will be ready for the flowering tent in the coming days :-) A few cuttings are taken beforehand. Was poured 2 times with 1 l each. I'm looking forward to the start of flowering :-) have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 https://shop.greenhousefeeding.com/affiliate/MadeInGermany_PassionGrower 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.amsterdamgenetics.com/product/choco-cheesecake/ 👇🏼👇🏼👇🏼 Use the coupon code: madeingermany for 10% on all Amsterdam Genetics seeds Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany

Lemonsita THC 1:1 CBD

beginning of the second week of flowering, the two girls are swelling a lot, the branches are growing strong ... I hope to put the other two girls in bloom soon, while they continue to grow

Week 4 of flower 👍🏾

Being Mephisto Freebies there’s not a lot of info on how these particular seeds grow. I found them low maintenance, they weren’t the thirstiest girls I’ve grown and I found quite late on they didn’t like high temperatures, caused over half of them to foxtail. That being said the trichome production was there from week 2 of flower and by the time I cut them down they were some of the greasiest plants I’ve grown to date! I left a decent amount of the sugar leaves on while trimming with the hopes it will slow the drying process by a few extra days, between 7-10 days hanging, then into jars with humidity packs to cure. It’s been a fun grow and an exciting introduction into the Mephisto brand, over the last year I’ve managed to purchase a few different strains on there Monday drops so il definitely be running some more in the future. Hope this diary has been helpful ✌️ Il upload the dry weight before I put it all into jars.

Last week I thought that the 50cm distance between the light and the top of the canopy was ok. But this week, I get some signs of light burns on every plants and I decided to put it back to 60cm. This distance seems to work best for this grow. I think the Cashew Kush shows some slight signs of nitrogen deficiency so I added a bit of BioGrow (1ml/l) and hope it will help. For more info about the "Soil people", see week 9. As part of the "Tent-X Ultimate Grow Challenge" contest, I received a free Tent-X controller, a MBS-TH Humidity/temperature/light sensor and a LMA-14 light control adapter. I requested them on sunday and get them on thursday so it was super fast, thank you @TrolMaster_Europe ! 👌 ------------------------------- Controller + MBS-TH review ------------------------------- The Tent-X controller combined with the MBS-TH sensor provides information about temperature and humidity. The light detector of this sensor is used to trigger the day/night mode of the Tent-X controller but doesn't measure light intensity (you need another sensor for that). I've tried to connect the controller to the phone app and it seemed to work. I will not use this function because it requires to connect the controller to the internet with an Ethernet cable and I don't have an Ethernet plug in my grow room. I set-up a rudimentary fixation system to hang the controller and the sensor since I'm not growing in a tent, but it works haha. Now, I can make my measurement in the center of the canopy instead of making them just above the ground. ---------------------------------------- LMA-14 light control adapter review ---------------------------------------- This adapter allows you to control your light via a RJ45 cable. I'm not using it because my light and my fan are synchronized and my fan cannot be controled by a RJ45 cable. I don't want to have a timer for the fan and a controller for the light. I just use the timer for both. However, Trolmaster sells some plug sockets that can be controled by RJ45 cable so you can control everything with your Tent-X controller.

Holy smokes first time washing a full plant and it sure paid off on some unbelievable quality rosin. Pressed70-160 My some of my 160 melt pressed straight thru 25u and 37 u rolled over 2 times tightly. Great surface area maintained in my press and 90% yeild. Excited to dabble in the rosin game. That was my small dinker plant yielded 300 wet grams for the record. 13 grams return for bubble hash. Larger plants processed I’m hoping for better yield. Let the juicing begin

6/4/25 been squeezing stems to strengthen them. Using tomato wire to keep her flat as much as possible

.