Likes
Comments
Share
@Xaboo
Follow
new week started. she is stretching to the sky. CU
Likes
21
Share
Los cogollos están densos, resinosos y bien formados, con un aroma dulce y afrutado que se intensifica durante el secado. Los tricomas son abundantes, lo que promete una buena cantidad de resina y un fuerte contenido de THC. La planta ha mostrado una buena resistencia a plagas y enfermedades durante su cultivo, y la producción ha sido generosa. El sabor es delicioso, con una mezcla de frutas tropicales y un toque de melón, que es lo que caracteriza a esta cepa. En cuanto al efecto, es potente pero equilibrado, ideal para relajarse sin sentirse completamente somnoliento. En resumen, una excelente cosecha tanto en cantidad como en calidad.
Likes
3
Share
Likes
18
Share
-Day 84 Chopped down La Chem1 and TD2. They are drying. They were just starting to amber and GC2 potential needs more room. In the end i am going for yield and starting with 6 i knew a few might have to go early as intended. Last week feedings in ppm were the following. 1200, 700, 900, 800, Since its mainly just three plants a few of those days is double dose of same feed. Added tarantula, it might be late but worth a shot. GC1 is slight foxtail due to the heater blowing heat up under it. They lower leaves of the entire canopy was going brown due to excessive heat and bad circulation. I have since pointed my fans upwards pushing air through the canopy, and so far no complaints. New grower and lots to learn. Also learned that GC2 is a super auto. Being late to the game means late finish with huge yields as predicted. Cleaned trays and started some new seedlings for some outdoor stuff. Happy 420 Day 85 Worked on spreading out GC2, The lower cannopy has already responded in a single day. GC1 still has clear on it but its super dank sticky and smells like melon pie and skunk. Minor trim on TD1 and La Chem 1, Got about 1.5oz of la chem and 2oz of td. will weight it offical later.
Likes
3
Share
The flush was perfect now let's wait for the burbing
Processing
Likes
27
Share
1/14: This morning, I did a foliar application of big bloom and fulvic acid, then about 5 hours later I watered them with about a half-gallon of rainwater each and added armor si, humic acid, endoboost myco/tricho, liquid molasses, and a bunch of cal-mag. Today, I also I wired up and mounted my new samsung sun board strips (660nm/730nm) and my Solacure FlowerPower UVB fixture. I'm running the deep red/far red bud boosters a few hours per day right now, but will run them for the entire photoperiod once I start flowering them. I'll run the UVB for 4 * 15-minute sessions a day for the full flowering cycle, and if they don't protest too much I'll increase each session by 5 minutes and evaluate again. Some strains are more forgiving than others and I've got 5 different strains in this space...so really not sure much time I'll get away with exposing them to the deadly rays without damaging them too much...😈 1/15: I received one of the rapid led/growmau far red initiator pucks today. With the placement of my UVB light, I'm realizing I'll need another far red puck to have even and intense far red coverage, so I'm ordering another with Prime delivery and waiting to start flowering until I receive it. I sprayed them down really well with ph adjusted rainwater tonight to rinse off nutrient build-up from foliar applications. 1/16: I'm really excited to try flowering under 14/10. I grew photos indoors on an off for 15 years before I semi-retired. If I added up all the additional flowering time I could have done through the years if LED technology existed, I'd have had an extra truckload of bud to smoke. I did another application of Axiom Harpin a|b Proteins this evening, right before dark. I'm expecting a big growth burst this week, leading up to the flower stretch. I really need them to trigger under 14/10 within 4 or 5 days🙏 ...if not, I'll switch to 13/11 and wait a few more days🙏😟..if still no pistils are poppin, I'll go to 12/12 and chalk it up as bad luck or varietal indifference to Pr and Pfr manipulation. 1/17: I fed each of them about 3/4 gallon of full strength veg nutes. This will be the last. I'll go with half-strength veg and half-strength bloom for a week, then go with full strength bloom nutrients until I start flushing them in 6-8 weeks. 1/18: I installed the second far-red flowering initiator today and got all my timers configured for flowering: ========================================= timer#1 - power strip with qb's and red boosters   10:00am -12:00am  timer#2 - (dual/independent setting)             sideA- 3-way cube with uva bars                   10am - 3pm                    7pm - 11pm             sideB- flowerpower uvb                    1pm - 1:15pm                    4pm - 4:15pm                    7pm - 7:15pm                    11pm - 11:15pm timer#3 - far red pucks   11:00pm - 12:15am timer#4 - sub-canopy tube   10am  - 1pm    3pm  -  6pm    8pm  - 11pm ======================================== I also did some testing on the timers and sealed myself into the closet to check for any light leaks. All good.👌 1/19: Looks like the FIM job didn't take on one of them..but she's got perfect symmetry. WIll probably have to just top her again next week...gonna be a tall one I think. Tonight is their first long night. It's ON!👍 1/20: I watered them today with about a half gallon each. I'm seeing calcium and magnesium deficiences here and there, so added some boomerang and heavy cal-mag-Fe along with liquid molasses, humic acid, and endoboost myco. I also foliar fed with big bloom and fulvic acid. That's it for week 4-
Likes
2
Share
@Khalico20
Follow
Esta muy sana, empieza la 4° semana de flora aún estra en preflor falta poquito para que empiece la falta del boost uso biocanna flora y boost Solo en la preflor uso el delta 9 de cannabiogen va de fábulas para que arranque bien la flora Alguna sugerencia que le vendría bien aparte de los 2 que le echo lo echo así muchas becas y queda un producto muy muy al paladar pero alomejor le vendría bien algún aditivo? Gracias de antemano Buen rollito!!
Likes
1
Share
Transplant into 1 gallon plastic pot mycorrhizae for less transplant shock with coco coir had to buffer a brick for 18 hours submerged in calcium after couple days went organic for less of a headache of wasting money on nutrients to make it simple and effective control system 1 plant is showing deficiency working on bring it back to optimal used compost tea with silica , fish fertilizer Neptune , soil recharge every week ph to 5.8-6.0 1 gallon 1 cup water per plant bigger plants get 2 cups want less run off after 2 week to get the calcium out from the buffer solution added 2-84 geia green and 4-4-4 1 tsp per plant of each dry amendment water every day so coco doesn’t get dry roots are healthy on the bottom of gallon pot you see new growth soon thinking of transplanting for better results during flowing stage currently photo and auto soon cross breed some of them during flower for new future projects ,
Likes
17
Share
@grow_rva
Follow
No defoliation this week. 🤙 Vertical growth has topped out on both plants. The GP#2 started her fade this week, she’s extremely sticky and the smell is strong. I expect GP#2 to be harvested first. I see this often, even when the plants are the same age whoever is the least touched finishes first. Til next week!
Likes
9
Share
Cut the plants down on the 24th of April, drying room levels are 72°F and around 60%RH, I'm currently on Day #14 of drying and the buds don't feel fully dry yet, the main tops feel crunchy and dry but the lower smaller buds are still quite moist and smell like chlorophyll, I think I may harvest the main tops so I don't overdry and leave the rest in the tent for another few days, either that or put the rest of the buds in a brown paper bag to finish drying. Finished dry trimming the plant ended up with 200 grams dry weight not including trim there's another 2 ounces of trim which if you want to include that would bring the total weight from this 250W LED to 256 grams. I'm super happy with the result of this especially for my first grow and from one autoflower, it can only get better from here on out. FYI Not sure why I can't edit the lights I used but the bloomgro 600W LED is PULLING AN ACTUAL 250W FROM THE WALL so the gram/watt should be .8g/W
Likes
37
Share
I went in scared that I would screw this up and waste money. I kept learning and fell kore and kore in love with it. Now I’m building a room and already growing 7 plants moving to 20 🙏🏼😝
Likes
18
Share
Likes
2
Share
I did not top this girl, yet. Her top lowers started catching up to the top so I didn’t want to stop her yet lol. But all in all she’s looking healthy.
Likes
6
Share
Plant is doing amazing! This is my first grow & I am so excited , I’m in the process of practicing LST , I am not the best but you learn as you go! Let me know what you all think! Do you think my light should be highered?
Likes
35
Share
welcome to Day 57 2/12/21 it's 35 days into flower and the flowers look healthy but not so much the leaves because of my fuck up with the rez she is having a hard time but I'm hoping I can get her to keep growing I have just realized that I have been doing the rez wrong all along but I think I can fix the mistake without dumping the rez. I should have been mixing a new rez every week but instead I was just adding 18 L . I put 2 18L bottles in the rez when it should only be 1 that way I have less waste and keep the nutes fresh that's all for this week's update so as always Happy growing and keep your stick on the ice 🙏
Likes
7
Share
She had 10l this week in dry side , visit her once every 3-4 days to check the reservoir , excited as she’s coming down soon , maybe 20-30days left
Likes
6
Share
Likes
1
Share