Likes
74
Share
I'm struggling with maintaining a regular humidity level The new light is working out great! The plants are growing at much different rates. If they were all as good as the best plant I'd be happier It's gonna be interesting to see how things finish! ___________________________________________________________________ So I made an attempt to save them/balance them. I fed them with just ph'd water to give them some time and incase they needed to chill a bit The runoff wasnt over 6.5 so I dont think they are locked up. I'll be back to feeding them again, but the difference in each plant has me concerned!
Likes
14
Share
This lady has been Transplanted on day 39 since she was planted (may 10th) and I've prepared the 15L pot with the complete line of biotabs using 2 spoons of startrex for every 5L, sprinkled a couple of grams of mycotrex on the transplant hole before putting the plant and then I added 3 slow release tabs one biotab for every 5L of soil, so that's why in this case I added 3, after the Transplant was done I immediately watered the plant with 1ml/L of orgatrex and 1g/L of bactrex, I hope you guys enjoy my work this season!!
Likes
6
Share
to view this lamp or any other marshydro product go to: https://instagram.com/marshydro_aliexpress?igshid=YmMyMTA2M2Y=
Likes
1
Share
They are being fed twice a week, with 5 glasses of 6oz each. Additionally, calcium and boron have been sprayed on the leaves. The overall smell is slightly stronger than last week. EC 1.1 PH between 5.8 - 6.2
Likes
26
Share
@Hawkbo
Follow
Video was taken 2 days ago right before a feed, today they are all praying to the lights and look good.
Likes
5
Share
Week 10 total life Week 5 flowering The stretching stopped and the energy is spent on bud formation. Fertilizer. Plagron Boom 5 ml, power bud 1 ml and green sensation 1 ml Stopped the vita race this week. Happy with the way it's building up it's bud density. leafs and flowers are turning purple and the resin production is great......4 weeks to go...can't wait 😶‍🌫️
Likes
13
Share
Week 12 day 78 i started the day and found my fan was fell down in my plants, i had some serious damage and i had to repair a few branches with some serious bud. Not all the buds make it and i had to harvest a few because of the damage. Not so nice because she was not ready. Also she is not so pretty anymore. But i'm happy there was no damage to the 2 huge buds their doing ok, and beginning to look better every day. So i started a final PK boost and hope i can finish and flushing after that. Day 82 i stopped the feeding and start to flush tommorow
Likes
19
Share
@Flavors
Follow
🌱 Week 15 Update (Veg) Just gave the girls a solid top feed 🍽️💧 and they’re loving it 💪🌿. Growth is lush and strong 🍃✨, canopy looking full and ready for the next stage 🌳🔥. Still spotting a few thrips
Likes
10
Share
@barlobruz
Follow
08/30/2021 - Noticing more gnats than usual. Could be overwatering, anaerobic soil conditions, or both. - Going to set up fly traps, starve both the plant and the gnats of water for about a week. - Will observe any stress responses due to an extended dry period.
Likes
51
Share
@Waveform
Follow
Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.
Likes
42
Share
PPFD - 950 Umol/m2 DLI - 40.0 mol/m2d VPD - 1.30 kPa Girls: SAD f1 @seewtseeds Badazz Cookies OJ @seedsman Alaskan Purple @seedsman Peyote Gorilla @seedsman Super Glue @anesiaseeds White Mango @personalfriendstrain Light Lumatek Zeus 465W compact pro at 100% All i grow is medecine for myself, nothing to sell, dont even ask !!!! Stay safe and do it with love for the love ❤️ 🙏 💚Growers Love to you all 💚
Likes
20
Share
Fed/watered with 1 gallon of the above listed nutrients, every 3 days. (when the growing medium becomes 95% dry) Gave her a light selective de-leafing, to open up the inner bud-sites to more light. The timelapse shows me why I won't be transplanting like this again. (Slow growth/lost time from constricted root mass)
Likes
8
Share
Week5 March 1st day 30 I transplanted one( the one with no broken branch) inti the 7gal today watered and did some LST I really hope it adapts to its new home I’ve never transplanted before I used extreme garden MYCOS hope it works also moved the light up a bit and plan on going 100% once I transplant the other one March 2nd transplanted the other one (broken branch one) my shop didn’t have 3.0😔😔😔😔😔😔😔 so i used DNC Great Lakes water only soil hopefully this works and I mixed some 3.0 I had left from the other pot cross fingers for nice transition to its new home March 5 been three days since transplant can’t really tell if they adapted to there new homes yet some sings of stretching since transplant I’ve never transplanted before and I’m not sure if they need water or not so imma chill let them go for couple more days then I’ll water scared to over water them right now since I transplanted them don’t want to over stress them other one in 3.0 seems little droopy to me compared to the one in Great Lakes but Great Lakes soil seems bit dry sooooo idk I’m going keep an eye on them
Likes
28
Share
@Brujha77
Follow
Beginn 4. Blütewoche Heute wurde nochmal entlaubt und es wurde einiges unten ausgeschnitten.. Da ich den Run mal wieder komplett waschen will, denke ich werd ich die 3. Nun so lassen. Mal schaun ob sie ins Zelt passen💪😏
Likes
11
Share
This week is going great. The ladies are happy and healthy. They are just starting to flower now and I am excited! Soon too dress with some Gaia Green power bloom. Happy Growing y’all!!
Likes
20
Share
@NONSENSE
Follow
I will update this within 5 days . I still dry the flowers.
Likes
42
Share
So got the net in place this week and started doing my ScrOG. Also did a bit of FIMing and some LST to help speed things up a bit. So far the weaving hasn't been as easy as I was told it be some ive been using some soft twist ties to help keep them in place. Going to veg and weave for another week or so before I switch it to flower. I was told you have to continue weaving for 2-3 weeks into flower but im worried that'll stress the plant out so if anyone that reads this knows other wise, comment below. Increased the feed from 1 liter to 2 liters because I wasn't getting any run off. Now I'm getting 10% run off every watering and I've been able to keep my run off ppm to less then 100 ppm above feed. So far I'm really like working with coco and don't see myself going back to soil unless it's outside plants. The environment has been fairly stable the last week with outside temperature droping. Had a spike in humidity yesterday because it got up to 75% humidity outside where I live. Luckly when that happened my tent only went up to roughly 67% but it's slowly dropped down and then stopped at 62%. There calling for another heat wave this week with it reaching up to almost 40c again for a couple days.... can not wait for summer to be over. I'm a ginger so I'm more of a autumn and spring kind of guy and plus this heat is making it difficult not only for this plant but also the ones I started seeding a few weeks back. Got so hot that they stopped growing for 3 days, 2 died and 3 got burned a bit. So far this 300w SE-3000 Spider-Farmer light is really rocking it. Great coverage, adjustable and detachable ballast have made this a easy grow even with the mad heat. Definitely going to look at the SE-5000 light that runs at 450w or the SE-7000 light that runs at 650w for my next light in the 4x4 tent. Next go around I'm going to try this light in a 2x2 tent I have that I use for germinating. Well that's all for now so happy growing everyone.
Likes
4
Share
DÍA 1 - CUARTA SEMANA DE VEGETA (26-05-2022) *Se sigue con el LST (28-05-2022) * Se le aplica una poda selectiva a todas * Tuve un problema de riego con varias * En su día 31 desde q salió del sustrato, de las 6, hay 3 ya que van bien y han sufrido soportaron mejor el estrés, de las otras 3; hay una Banana y una AK que vienen más bajas que todas, de ramas más cortas y distancia internodal corta a comparación de las otras. Después esta la lemon que se viene recuperando muy bien de estrés y fue la que siempre vino más grande y ramificada :) DÍA 7 ÚLTIMA SEMANA VEGETA (01-06-2022) * Último día de la semana de vegetación, ya mañana es su día 1 de flora. * El día de ayer se le regó lo último con Vegalquimia, y se le añadió 1ml de Alquisweet de LAAOS. * Estos últimos 2 días he tenido problema de temperaturas muuuy bajas donde vivo, con luz encendida llegan 20 grados con suerte y luz apagada a 12-13 grados. Estoy tratando de jugar con bajar la humedad pero no la puedo bajar a menos de 55% aprox. Espero ya mañana arreglar ese problema de bajas temperaturas. * Lo que es el cultivo se ve bien dentro de todo. Hay dos enanas que se estresaron en la semana 2 y quedaron pequeñas. A todas se le aplicaron LST, unas resistieron mejor los distintos estrés ya mencionados en semanas anteriores. Pero va bien. * Hay 3 en pre flora, una de ellas en pre flora avanzada y es una de las más enanas.
Likes
5
Share
en espectáculo a la vista mis bellas, ya dan señales que el otoño llego y están próximas a su cosecha