The Grow Awards 2026 🏆
Likes
Comments
Share
Harvest Week!! WET WEIGHT— DRY WEIGHT Plant C: 597g — 105g Plant B: 605g — 122g Plant D: 413g — 86g Plant A: 507g — 105g Total Wet Weight: 2,122g Total Dry Weight: 418g Averaged about 80% reduction from wet to dry This was an abundant harvest for me 😍 super grateful for the outcome of this set of plants! All are curing at this time!
Likes
5
Share
Bueno esta semana fue un cambio total. Cambié la alimentación por toda la línea top crop. Hice un riego de 500 ml con 1 ml de top veg , 1ml de Green explosion Y 0,50 aprox de deeper y barrier. A los dos días regué con 300 ml y 1 ml de top veg. El próximo riego lo voy a hacer con 500 ml de agua sola. Para luego volver a empezar como con el primer riego nada más que con 2 ml de top veg por riego y tal vez ya no utilice deeper y agregue big one. Debería inclinarla un poco más ? Solo voy a realizar lst. No voy a hacer poda apical . Saludos 🇦🇷🇦🇷🇦🇷
Likes
30
Share
Likes
7
Share
Another week in the books. About two more weeks to go and these ladies are looking fantastic. They have really expressed themselves in this pass week. Buds are rock solid dense I hope for a bit more bud development as far as size but if not the density definitely makes up for it. The Trichomes on each plant are becoming more and more pronounced each day. I am starting to see a fade happen olin all plant so harvest window is approaching. Aiming for day 70 ish harvest or slightly later.
Likes
12
Share
The Cookie Girls are doing great 😊 Overall, I’m very pleased with the results so far. At day 8 I stopped tucking the branches and allowed them to grow up. In hindsight, I probably should have kept going for another couple of days. They continued to stretch rapidly all the way up to date 12 or so. At day 10 I cleaned up some of the small bud sites and leaves that were below the 1st trellis. These sites do not get enough light to make anything good, and take away energy from the main tops as they grow and compete. At day 12 I decided to add a second trellis net to provide support to the tops that came up so fast. They seem to have stopped their main stretch faze, and are looking happy and healthy now. I’ve continued my water, water, feed schedule and have not seen any cause for concern. The girls are taking a little over a gallon of water every 72 hours at this point. Humidity is being controlled automatically with my in-line fan and humidifier. RH is set to 57% and temps hover between 77-80 degrees with lights on, and about 70-72 with light off thanks to my furnace being back on for the cooler temps. The 2x4 5 gallon girl is doing great as well. 😊During the stretch, while I tucked, I snapped more than a couple of tops off, but the plant continues to thrive. She is going to have some great bud, the branch structure is nicely developed with tight node spacing. I’ve been plucking off all the lower growth, and tucking leaves as they block bud sites. Will be doing a defoliation next week. Happy Gardening 🇨🇦👊❤️
Likes
4
Share
@KhaVigga
Follow
now im start to using many kind of sugar till harvest, beer-fpj-molasses-coconut water...
Likes
13
Share
Short and stacked with really tight Node Spacing. Packing on the frost already! I decided to go in and take some of the larger Fan leaves off being very selective in which and how many I take .
Likes
25
Share
@Cdaddk
Follow
I see a little amber tricomes on both plants , so i will begin to flush next week ore maybe 14 days , i love the smell from the white widow and the big stone hard buds , it will hopefully give me a nice smoke 💨👍
Processing
Likes
10
Share
Noticed that on one plant leaf tips are curled down and some of them are yellowish. As I am giving them enough nutrients and using ph perfect advanced nutrients it still may be the ph because these nutrients are meant for hydroponic system. Thinking that they might have a nutrient excess because how dark green they look. After topping their growth have stunted a bit but it’s normal. Overall they seem very healthy
Likes
57
Share
The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. Grand Cru Genetics is a cannabis seed bank that emerged in 2018 from a group of breeders in Madrid to provide a satisfactory experience to all cannabis users. "If we do things, we do them well. Due to our experience in the sector and our taste for excellence, we know high quality and we seek it in everything we propose and do." "We have a “cultivate without giving up” philosophy that we apply to everything we do. We do not give up, we are friends of change, and we adapt as necessary in a still restricted sector." "We speak relaxed because we know how to relax. We are not intense or preachy; we accept everyone as they are, and we understand that farming is not for everyone. But for those who do, we are here to accompany you. We like to do it and tell it. We are experts in the field because we are the first to do it. We speak from experience and connect with others because we share the passion for cultivation." "Cannabis has the ability to show us a world of possibilities. When you cultivate and live its growth process, you enjoy a path full of emotions and not just the final destination. At Grand Cru we find beauty in small things. We are attentive, observant, detail-oriented and aware of everyday things, and we savor them without rushing." In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. I think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, the RH will begin to drop slowly to the desired level I set, and the extraction turns off when it reaches the desired RH. The plant, as it performs cellular respiration, will always release more water into the air; therefore, the RH% of the tent overnight will increase, as long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential, which will work wonders with mass flow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.
Likes
6
Share
@Tezza2
Follow
My girls are getting massive this could end up being the biggest yeild ive ever gotten .i believe that I will get at least half pound from each plant
Likes
45
Share
@valiotoro
Follow
Very very sticky i had to change gloves every 2-3 buds!🤓 Delicious smell🤤
Likes
9
Share
Dia de riego, claramente una no se ve tan saludable como la otra, ya que bebe mas agua y necesita mas dosis de nitrógeno. Comenzare a regarlas con dosis por separado para reforzar a la mas débil.
Likes
11
Share
@Drgreen13
Follow
Flipping the light schedule this week. Stay tuned
Likes
42
Share
@Hashy
Follow
Harvest was a bit of a disaster really. Chopped it down right at the start of a heat wave so I left as much leaf as I could on the plant to try and help slow the drying down. Don't think I'll get my 10 days drying that's for sure. More pictures and smoke report to follow.
Likes
7
Share
@JBOrganix
Follow
Super burnt lol. Ooops I'll still finish her off and hope for the best. Should still be some decent smoke 👌This girl still particularly blows my mind. Beautiful terpenes on her. Incredible nose. 👏👌
Likes
5
Share
Baklava de The Plug Seeds es un cruce de Wedding Cake X Gelato. Hay varios Phenos (3) el mejor para mi gusto es bastante púrpura y de gran rendimiento. Soporta bien altas cargas de fertilizante como además las altas temperaturas de verano. Con el frío tiende a cambiar el color a negro/purpura con tonos de verde lima y rojizos cobres. Terpenos que recuerdan a una bolleria o panadería, toques dulces, mantequilla, frutos secos, canela, miel y el pheno Gelato sale mas a crema dulce terrosa. Hay un pheno que es bastante mas Kush y Gassy! Altos contenidos en THC y muy buenos resultados para hacer extracciones.
Likes
4
Share
Alright, by now your laughing at me or just about will be. I’ve spent the past three nights obsessing over how to get my seedlings back on track from their stunted growth. Meanwhile taking care of the one plant that took off nicely. I trimmed up the spotty leaves again and removed all of the other plants from my aero garden into the LYKO. I left two, in very bad shape seedlings in there in hopes something got happen. Took the healthy ones and moved them in with the mama that’s doing well. I noticed their roots are red.. but not rotten. They look salvageable so I’ve cleaned them and added hydro guard in hopes to repair them and plan to add some rapid start root enhancer when it comes in the mail this week. I’ve cleaned the water and the entire machine before “repotting” into the Aerogarden. Everything looks nice besides the shit red roots. You can see in the good one that where I trimmed the node there are more waves coming in and new nodes already. I think we’re almost ready to top this one but I’m going to wait a bit so I can create a clone from the topping in a week or two. I also added a fan and moved my airstone into the Aerogarden. I got so upset I stunted these that I went out and bought new seeds as well and you can see my other diary germinating. Will keep y’all updated. Thanks for the support!!
Likes
1
Share
This girl got a bit of a feed this week but it looks like she is wanting more of something. Her fan leafs definitely perked up started praying to the light. She will get only 1 more feed of remo nutrients before I just give ph water to finish.