Likes
Comments
Share
Start of Week 4 flower | barely have enough space | the lamp is quite close | adjusted the light capacity | some leafs have burn but nothing special | i feel like this is gonna end quite well | i also installed a second scrog net just in case
Likes
Comments
Share
@mariocave
Follow
First week of flower and the plants seem to be doing alright still … remember this is my first time planting indoor
Likes
4
Share
@Nistnov
Follow
Had no time for the harvest so i took the risk and let her grow, under a rain cover. Im surprised that i didnt spot any bud rot! Removed fan leaves for better airflow. The weather makes it hard for her to fatten up, so i will give her one more week to finish up. Shes super frosty and has such an amazing smell. I did harvest 3 small branches that are drying and curing right now, looking forward to the smoke test.
Likes
40
Share
Hi guys lost track of where i am now lol so we will run until there done lol I got a seprate dry tent now so makes my life easier. 1 purple startdawg lst 1 green startsawg lst 1 cheese lst 1 cheese oh natraul grown with polyploid 2 x pot noodle blueberry 1 x blueberry lst 3 x baby photo period big budha cheese. Leave me a comment let me know your thoughts so far.
Likes
11
Share
Endnu en topping og så skal hun bare have lov til at vokse og gøre sin ting! Kannabia er klart et frø mærke jeg vil blive ved at dyrke Kannabia og Zamnisia er også et godt match og dyrke sa
Likes
3
Share
Week 8 flower, watering until the end. No more top dressing or fish shit. Just the same de chlorinated tap water, not ph’d or filtered that I’ve been using since the beginning. Comes out the tap with a ph of 7 and less than 15ppm tds. The soil takes care of everything.
Likes
21
Share
July 27: this is a great plant that is doing fine. It was started later than my other three plants, and won’t get as big, but it is growing fast. This was one of my faves from last year so looking forward to having this one again. All the Ganja Farmer strains that I’ve tried have been very good. July 29: pretty cool last night so I warmed the water up to 26 C before watering at 7 am to help them get off to a warmer start for the day. July 30: still a bit crowded so I supercropped it again to get the top growth tips to the same elevation. This one was manifolded to 8 colas and by supercropping like this I’m trying to see if I can get something like 16 final colas after only topping for 8 colas. Whatever, messing around. Aug 1: still supercropping main tips trying to see if I can get enough sunlight in to some of these lower growth tips. Might work, might not. Doing today’s diary entry I realized that I should be scrogging this one…so SCROG net applied.
Likes
13
Share
@NicoKh
Follow
Was a little bit challenging for me, due to the outdated nutrients table, mostly on the Flowering period, also little thing like i have to fill more the pots, also with this kind a strain and also with cuts instead of seeds, may be is better to don't do the topping and don't loose time and energy on the vegetative period. At the same time, more or less about the 8th week of flowering it starts to appear something like Alternalia or Overfeed of Phosphor still don't sure. All this issues have impact the grow in terms of the size of the branches and the whole plant, the size of the buds and the hardness. In strictly terms about the strain, the quality is out of mind, amount of resin is crazy, just have to improve my skills and get bigger crops
Likes
22
Share
@smoker420
Follow
think ive killed all gnats growth has started to show again
Likes
3
Share
@SupaDank
Follow
Good strain to grow if you want a pretty good yield and a great smoke. Got really good feedback from some friends about her so I will continue to have her in my grow room.
Likes
Comments
Share
@Hou_Stone
Follow
May 2, We are on day 38 of grow I keep doing some cut and management to encourage the plants grow using main lining techniques At this stage I use my 300W light is at 70% of power , extractor at 30%, + 2 PC Fan in the tent and an humidifier
Likes
8
Share
@Arcadium
Follow
Well I was gone for 10 days and came back to absolutely astronomical growth! Must of grown a foot and a half at least! No signs of pistils yet, which means she's got another foot even before the pre flower stretch! What the heck have I gotten myself into. Did some minor defoliating, mostly removing growth tips below the 4th or so node, and LST clips to try and control height and canopy. All she had while I was done was 90min drip irrigation every 3 days and a quick spray of LCPT.
Likes
7
Share
@Eddjack
Follow
Sta esplodendo si iniziano a definire le prime cimette. Inizia a emanare anche un buon profumo molto fruttato, per fortuna esistono i filtri ai carboni attivi. Ora sta solo ad aspettare dopo le carenze iniziali si e ripresa alla grande vedremo in futuro che succederà. Dajeforte growes
Likes
37
Share
🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚
Likes
2
Share
@dauntless
Follow
Week 9 started on May 29, 2022 This week is gonna be the last full veg week. I added the flowering HPS light to the side where the cola was injured, plants love the HPS so I figured why not, I'll ned it during flower. Of course that raised tent temps a full 3-5 degrees, had to change some ventilation parameters, fan speed went up on both in tent, and on the a/c infinity. I also cleaned the screens, and opened another vent at the base. Fans are on. The plant has done very well. Added Foop spray into the mix and so far so good, I see that it has slightly improved the plant in a short period, and it smells pretty good, took it to the garden for more trials. Dudes at AutoPot USA fixed my stuff!! Thanks guys. The fix they troubleshooted worked. My res is below 300 ppm and at 69 degrees F I have Fox Farms Bloom diluted and Bio War Flower crushing the biologicals - after I fixed the leak issue, I figured why not feed her while she gets her finals sea legs for the flower trip ahead. Nothing crazy, I run stuff diluted, especially when I am dialing my light pre flower, I can't risk burning them with heat or nutes. I am a tucking fool, a bending fool, and a foop spraying fool this week, you guys are not gonna believe how many fan leaves this thing put out in seven days, and I took off a significant amount mid week 8, I was a bit worried, oh well, never-mind this is White Widow, she doesn't care, all she wants to do is bust outside in jungle in South America
Likes
4
Share
Likes
7
Share
Original Sensible Seeds - Frosted Guava 🍈 Enjoy - Week 1 🌸 - 25-26 grad Celsius - 50-55% humidity level - 20l Air-Pot (75% BioBizz All-Mix, 25 % BioBizz Worm Humus) - RO-water (PH 6,25) Sanlight Evo 3-60 80%: about 850 PPFD Spider Farmer Glow30 12h/12h on
Likes
2
Share
@Ninjabuds
Follow
My little skunk apple runtz lady man I am disappointed so far with this plant not much can be expected from a pollen chuck seed I made myself but I think it will have nice smoke in the end just not alot most likely The day has come and it's time to flip these ladies to flower. I was planning on letting them go untill Friday and let the smaller ones grow just a bit more but they will be fine. I have the eternity cup contest in mind and I'm thinking timing so I need to get these lady done and out my tent lol. This past week I turned the light up alot getting them ready to flower they have grown a bunch inhavendone lst maybe 5 it 6 times on the branchs and they arw nit bendy anymore that will help durring flower.
Likes
7
Share
Strain: Fast Buds FBA2504 Grow Type: Indoor Pot Size: 5 Gallon Medium: Coco Coir Nutrient Line: Athena Week 9 Update She’s really nearing harvest now. Her buds are absolutely beautiful, coated with trichomes and giving off an incredible aroma. Her fan leaves are fading into a lovely orangey yellow, adding even more beauty to her finish. I’d say she has about a week left maybe two tops. I fed her today, but starting from her next feeding, I’ll begin the flushing process. Can’t wait to see how she turns out! 😍 Watering 1.5–2.2L Indoor Climate Conditions Day Temperature: 23–26°C Night Temperature: 16–18°C Humidity: 45–55% Until the next one stay lifted, and remember to use my code ISLANDT for 15% off your next order at Fast Buds!
Likes
11
Share
@Kirsten
Follow
19.1.25: I have watered all plants with 300ml of dechlorinated water PH'd to 6.3, with 1/3 jar of black strap molasses with Ecothrive Biosys-1g. I am looking to increase the sugars for microbial life and plant processes. It'll also add some extra Calcium, Magnesium and trace elements. I also, watered all plants with Bloom nutrients. Using dechlorinated water PH'd to 6.3 with the following nutrients: (ml/l) ;- ♡ 2ml Cal-Mag ♡ 2ml Ecothrive Flourish ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Biobizz Bloom ♡ 2ml Biobizz Top Max ♡ 1g of Ecothrive Biosys I watered around 1-3 litres per plant. Depending on size and requirements. I'm still spilling water containing the nutrient solution. 🙄 I am using this to rub into the leaves. I think a nice foliar massage won't do any harm, make the most of the situation. The plants have become very hungry and thirsty. Increased the water by double. I ran out of my TNC cal-mag. I decided to order the Xpert Nutrients brand, as I like their products. It isn't organic as far as I can tell, but I don't think it matters too much to me, to be honest. I also want to top dress this week, so I bought some Green Leaf PK bud Booster dry amendment from Amazon, too. I'll mix it with canna coco, perlite, worm castings, and Ecothrive Life Cycle. 24.1.25: I went ahead and top dressed all the plants with 4.5 gallons of my supersoil custom mix. This consists of the following substrate and dry amendments: ♡ 60% Canna coco ♡ 20% Worm castings ♡ 15 % Perlite The remaining 5% consists of the following dry amendments;- ♡ 10g Ecothrive Biosys ♡ 1 Tsp RHS Mycorrhizal Fungi granules ♡ 3 Tsp Vitalink Bat guano ♡ 4 Tsp Diatomaceous earth ♡ 8 Tsp Ground Cinnamon ♡ 10g Green Leaf Bud Booster PK booster. ♡ 3 Tsp Ecothrive Life Cycle. •Worm castings for some all round nutrition. •Cinnamon for mildew and bug repellent. •Canna coco base substrate. •Perlite for adding oxygen to the root and soil system. •Green Leaf Bud Booster PK Booster for blooming. Building strong big buds. •Vitalink bat guano again for Bloom. •RHS Mycorrhizal Fungi granules, to boost beneficial microbes. •Ecothrive Life Cycle for lots of great benefits. •Diatomaceous earth for Silica. •Ecothrive Biosys, for an extra microbial boost. 24.1.25: Gorilla Cookies is absolutely healthy and strong! I'm very pleased with this plant. I was looking into topping autoflowers and had wanted to top her. Anyway I read some things, as a result of which I decided, last night, I wasn't going to do it. So today came around, and I topped it. Totally forgot I wasn't going to do it 😅 I was really excited to experiment with topping in addition to LST. Now I guess we're all in! 🤞 Thanks for checking out my diary 🍃 ✌️