Likes
Comments
Share
@Nistnov
Follow
Had no time for the harvest so i took the risk and let her grow, under a rain cover. Im surprised that i didnt spot any bud rot! Removed fan leaves for better airflow. The weather makes it hard for her to fatten up, so i will give her one more week to finish up. Shes super frosty and has such an amazing smell. I did harvest 3 small branches that are drying and curing right now, looking forward to the smoke test.
Likes
4
Share
Comenzamos bien,lo que no se es cual fue mi error,ya que germine semillas con 1 y dos años conservadas por mi (p.punch y zenzation)germinaron como locas,pero las Apricot no soy capaz 1 de 7 😅😅😅las otras pleno 3 de 3 y 4 de 4,seguimoos
Likes
2
Share
@BigGGrows
Follow
she is pushing through the initial HST fimming very well. Nothing seems to slow her down. I am starting 1/4 strength nutes now to help her push through the stress. I also initiated some LST and tied her up, pulling down the branching. The fim job has produced a tripple top crown cola, top new side tops, and 2 new internodal branches, that will be tops down the line. Things are getting interesting folks! Stay tuned!
Likes
Comments
Share
Likes
21
Share
@NSABND
Follow
Hi there start of week 11 today 😏 today (Day 78) the weather is cold and very high humidity because of rain 😲😩😕 Day 79 same shit weather then yesterday with very high humidity and rain 😵😲😵😲😵 Day 80 autumn has arrived 😱😨😰 cold with rain and high humidity 😲😵😭 Day 82 there are no Updates sorry 😵
Likes
Comments
Share
@Oldwied
Follow
Day 25 Fotoshooting Topping Day 30 Fotoshooting LST Light Power: 60% In the beginning of the week I topped the girl above the 2nd node. (The upper internodes did not grow uniformly.) The lush green is returning, and the little one has weathered the stress well. Unfortunately, after pruning, the three-branch structure reformed into a classic two-branch structure. On the bright side, the base looks nice.
Likes
Comments
Share
About to start on the Terp tea bloom top feed And lollipop her
Likes
6
Share
Days 15 to 17, varying by plant: My journey of experimentation, aiming to refine and perfect my cannabis cultivation methods, continues. This venture’s ultimate objective is to position myself as a preeminent cannabis cultivator in my locale. As I navigate through the labyrinth of regulatory licensing, I’m conducting a trial run with my seedlings under continuous lighting conditions and a minimal nutrient regime. My primary goal during this phase is to identify any potential hiccups that could hinder the growth process and ultimately impact the productivity of my intended commercial operation. As I delve deeper into this exploratory phase, I draw invaluable insights from the thriving cannabis community, whose collective wisdom informs my decision-making process. Given my geographical location and available resources, I’ve opted for a strategic shift in my cultivation strategy. Previously, I’ve been procuring seeds at an average cost of $10 to $22 per seed, with a relatively broad success rate variance, ranging from 70% to 85%. However, an alternative presents itself in the form of local cultivators. These businesses offer cannabis plants aged between 2 to 4 weeks, boasting an impressive variety of over 100 strains. These juvenile plants are offered at a cost-effective rate: an average of $100 for eight plants. With a success rate hovering between 70% and 95%, these plants offer excellent value. Essentially, I can access pre-grown plants at a substantial discount, in turn significantly boosting my chances of success. Consequently, I am poised to transition away from growing cannabis from seeds to harvesting. By sourcing my plants from local cultivators, I stand to significantly reduce overhead and production time—an undeniably smart move from a business standpoint. This strategic pivot signifies the end of an era and the exciting beginning of a more efficient and cost-effective chapter in my cannabis cultivation journey. I am currently outlining a plan to expand my cultivation by acquiring several juvenile plants, which should be happening between July 1st and 3rd. The new additions to my garden will include Acapulco Gold, Gelato, White Truffle, and Runtz. These will be cultivated in harmony with the existing growth, which comprises God’s Gift, Northern Lights, and the final surviving F1 Epsilon. My primary objective is to establish the most efficient and cost-effective supply chain possible. I aim to achieve this through the use of an off-grid system that runs solely on solar power, which will ensure complete sustainability and renewability. From a business standpoint, this approach is advantageous as it allows me to leverage the growth of high-quality plants that are already in the cultivation phase. The new plants are expected to arrive in about a week. If the growth rate of the currently cultivated plants doesn’t meet expectations, I’ll be incorporating several of the newly arrived plants into the hydroponics systems. This methodical approach aims to ensure an optimal growth rate and the highest possible yield. I also wish to address the cannabis grower community directly. I hope that my decision to skip the seed-to-plant stage does not cause any offense. My intentions are simply focused on maximizing quality and output, while minimizing our carbon footprint. I believe this approach is in the best interest of sustainability and efficiency, without compromising on the quality that our community values so highly. As we proceed with this venture, we’re currently in the phase of collecting equipment and navigating through the licensing process. To help lower our overhead and assist with consulting fees, we would greatly appreciate any donations, especially in terms of lighting equipment. Your support in this endeavor will contribute significantly towards optimizing our operation and will be deeply appreciated. Disclaimer: Let it also be known I am completely abiding by all state laws, and do not plan on selling any of this current bud. This is for research to avoid future growing "potholes" in the growing part of the business as we have a very small team. My end goal is to help change the current stigma around cannabis and provide a useful service that can help localize and reduce the inflation on cannabis prices in socal by providing a logical supply system. Again I intend on doing all things through the legal route as there is no need to do other wise given the laws on personal use and growing.
Likes
20
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Sie erhalten 25 Prozent Rabatt in unserem Shop Mindestbestellwert beträgt 75 Euro https://greenbuzzliquids.com/en/shop/ Code: GD42025
Likes
23
Share
@Kynareth
Follow
Not many to comment this week. The plant is develoving good and dense buds and the smell is increasing. I like how the flowers look. According to the breeder it should be ready in 9 weeks before germination, i think it will be more
Likes
15
Share
Half way through flush; final week before harvest. Photos/video taken 98 days after breaking soil, day 56 of flower UPDATE: Plant harvested on 11/5; day 101 after breaking soil, day 59 of flower.
Likes
14
Share
Gracias al equipo de MSNL Seeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁RS11: RS11 es uno de nuestros nuevos híbridos 50/50 perfectamente equilibrados. Creamos RS11 cruzando Pink Guava x OZK x Sunset Sherbet con la intención de crear una variedad que ofrezca medidas iguales de efectos edificantes y relajantes. Aclamada como una de las variedades más sabrosas del mercado, su sabor agrio y dulce a bayas viene con un potente rango de THC del 27% al 31%. 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 2: Fantástica semana, estan creciendo de una forma espectacular gracias a la ayuda de @marshydro, @xpertnutrients y @trolmaster. Se puede apreciar un tercer nudo y se ven aparecer las primeras futuras ramas, espero que todo siga asi. Esta semana espero trasplantar a la maceta definitiva. Potencia de la lámpara: 50%
Likes
21
Share
@Borberad
Follow
Woche 12 Solangsam wird sie bunt und es es deutet sich an das sie aus dem Soil nicht mehr viel rausholt. Da sie noch gut 20 bis 30 Tage stehen soll gibt es zur Unterstützung etwas Hesi Boost und ab und an etwas Plagron Green Sensation.
Likes
82
Share
Week 7 Flower We've finally started flush 💦 on Day 43. I still run EM1 at 1ml/ltr as it goes a long way once activated/stretched. It's always going to be a benefit to keep any microbes you can in the coco. You can also use Mammoth P throughout flush, but due to its price I just stick to EM1 in flush. There's plenty of other microbes that can be used too. I flush around twice the pots' volume at 6pH. But before flooding the pot I slowly pour water through the centre of the pot, around the stem, in order to take a true reading of the ppm and pH of the run off. If the ppm/ec reads a lot higher than your average feeding throughout bloom, then there's been issues such as a lockout, incorrect pH, over feeding etc. This wasn't the case, as this girls' was at the right level. If the pH is too high or low, I adjust the pH of the rest of the water that'll be flushed to try to fix it. Again, this wasn't the case with this girl as she had a perfect pH 👌👍 Just before all of the water has gone through the pot, I take one last reading from her last bit of run off. The ppm should be down to no more than 100ppm for the first flush (+starting ppm of water if using tap water). After the first flush the ppm value of the run off will quickly go all the way down to 0, or at least below 50ppm (+tap water ppm). I use tap water that is between 150-190ppm, but I'm looking to switch to RO as soon as I can. I still get a very good flush, but I think using RO water will be the next step in getting a more thorough flush as it won't contain even the small amount of nutrients and metals that tap water contains (along with any harmful chemicals). Always remember to bubble or let the water sit for 24-48hrs before feeding to your plants. That goes for all feedings in every stage of growth if using tap water. Because I keep fairly low temps in the Den she's starting to turn a beautiful dark purple. Her buds are still swelling and smelling like a nice gassy OG, with hints of citrus/tropical fruits. I'm really looking forward to taking this girl down, but after at least another week! Thanks for following and happy growing! 🐺
Likes
21
Share
@BLAZED
Follow
Week 18 (30-6 tm 5-7) 30-6 Temperatuur: 31.4 graden (licht aan) 22.5 graden (licht uit) Luchtvochtigheid: 69% (hoogste) 50% (laagste) Ik heb de trichomen bekeken en heb besloten haar nog een dagje langer laten staan. Watergift: Geen. 1-7 Vandaag heb ik de trichomen opnieuw bekeken en die zien er goed uit! Veel cloudy en best wel wat amber. Ik hou echt van deze trichome foto's, echt mind blowing hoe dat er uit ziet! Dus vandaag gaat de schaar er in! 2-7 Ik heb besloten om een wet trim te doen zodat als ze droog is ze gelijk in de cure pot kan. Geloof het of niet, maar ik ben wel 12 uur lang bezig geweest om alles te knippen 😅 Op 1-7 ben ik in de middag begonnen en in de vroege ochtend van 2-7 was ik klaar. Het natte gewicht van de buds is 283 gram, en het natte gewicht van de trim is 61 gram. Ik ben nu al super tevreden met het gewicht! Dit is meer dan het dubbele aan gewicht vergeleken met mijn eerste grow. De buds zien er ook echt mooi uit. Ik schat dat het tussen de 50 en 75 gram droog gaat zijn. Ik ben benieuwd, nu een paar dagen drogen! Droogtent: Temperatuur: 23.4 graden (hoogste) 21.2 graden (laagste) Luchtvochtigheid: 59% (hoogste) 42% (laagste) 3-7 Droogtent: Temperatuur: 23.2 graden (hoogste) 21.5 graden (laagste) Luchtvochtigheid: 50% (hoogste) 41% (laagste) 4-7 Droogtent: Temperatuur: 23.1 graden (hoogste) 22.1 graden (laagste) Luchtvochtigheid: 53% (hoogste) 46% (laagste) 5-7 Na 3 dagen is ze droog genoeg om te curen. Wel heb ik iets te lang gewacht want de LV in de jar geeft nu 57% aan. Ik hoop dat dit over een dag wat om hoog gaat. Nu een paar weken curen en dan kom ik met de rook verslag 😁 Ik zal binnenkort ook even berekenen wat de gram per watt is, aangezien ik de lamp niet de gehele grow op 100% had staan. Het droge gewicht van de buds is precies 75 gram, en het droge gewicht van de trim is 19 gram. Samen maakt dat 94 gram! (De trim gebruik ik om een CBD cake of bubble hasj te maken) Ik wil iedereen bedanken voor het volgen van dit avontuur! Tot de volgende keer!
Likes
16
Share
@Rinna
Follow
I’ll update ya’ll on the smells and tastes after drying and curing! So far both are packed with ice and smell very potent, a little overpowering still, so I want to give it some time before they’re cures and can show their true terpene profile!
Likes
3
Share
@Takeaims
Follow
Couple belters coming right out the traps large bulky stocks fingers crossed this growth keeps
Likes
2
Share
Got the tent open to keep the humidity down