-------------------------------------------------- Day 8 Water: 50ml RO water Humidifier: 65% (MID-MIST) Fan Speed: Mid-Low Light on @ 19:00 (23° celsius @ 76% RH) Light off @ 13:00 (19.5° celsius @ 54% RH) ------------------------------------------------- Day 9 Water: N/A Humidifier: 70% (MID-MIST) Fan Speed: Mid-Low Light on @ 19:00 (22.5° celsius @ 74% RH) Light off @ 13:00 (19° celsius @ ~84% RH) ------------------------------------------------- Day 10 Water: 50ml RO water Humidifier: 65% (LOW-MIST) Fan Speed: Mid Light on @ 19:00 (22.1° celsius @ ~75% RH) Light off @ 13:00 (19° celsius @ 70% RH) ------------------------------------------------- Day 11 Water: N/A Humidifier: 65% (LOW-MIST) Fan Speed: Mid Light on @ 19:00 (23.3° celsius @ ~70% RH) Light off @ 13:00 (20.7° celsius @ 66% RH) ------------------------------------------------- Day 12 Water: N/A Humidifier: 70% (MID-MIST) Fan Speed: Mid Light on @ 19:00 (23.4° celsius @ 66% RH) Light off @ 13:00 (19.9° celsius @ 70% RH) ------------------------------------------------- Day 13 Water: 150ml RO water Humidifier: 65% (MID-MIST) Fan Speed: Mid Light on @ 19:00 (22.3° celsius @ 72% RH) Light off @ 13:00 (21.5° celsius @ 67% RH) ------------------------------------------------- Day 14 Water: N/A Humidifier: 65% (MID-MIST) Fan Speed: Mid Light on @ 19:00 (24.5° celsius @ 63% RH) Light off @ 13:00 (22° celsius @ 65% RH) -------------------------------------------------

Flowering days 27 since time change to 12 / 12 h Hey guys :-) The ladies look beautiful and are growing very well. The sweet smell starts to blow through the whole tent :-) . This week it was watered 3 times with 1l each (nutrients see table above) Nothing else happened this week. Everything has been checked and verified. A lot fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Rega com Fertilizante. Terminando de regar com o ultimo litro feito. Mais ou menos 150 ml em cada planta. 1 ml do liquido por litro + 0,15 g por litro do sólido. Ajustado o PPFD para aproximadamente 500 em cada planta

They’re looking extremely healthy..gave em their first nute feed with the last watering seem to be doing fairly well..fimmed the GG and LST. Did not touch the unkown as it looks smaller to be the same age. Running GHE base line with few extra supplements. ****UPDATE**** Both are LST’d..might rethink the way I tie them. Going for a “coil” type look, we’ll see though. They’re looking great! Hoping for females!

Week went good they all flowering Nicely something is wrong with app I think it changed my numbers last week and I think a week is missing but it’s ok I defoliated this one plant for the 3rd time she will need one more then lollipopping everything below 2/3 of top I been doing some experimenting with ppms so u may see some tips burnt and they are flowering so fan leaves are yellowing on a few but just normal stuff I pushed them up to about 2200 ppms to see what they can take and they drank it no worse for wear besides some burnt tips also I do swap between mammoth p recharge and dynomyco like once a week just to see if I can see difference and what works better I have to say these genetics are some of the best autos I dealt with I want to do some of fastbuds. Ff strains to see what I can do with them but we will get there when we get there also don’t mind little babies in there those are moms these being autos it’s only place I can put rn happy growing

Day 37 Week 5 update: Not looking awesome. Appears I have a root aphids or hopefully just soil mites “arthropods” and maybe thrips.. going to be fighting soil and plant pest.. :/ Update: went to store and grabbed Neem Max by Bonide, Alaskan Fish fertilizer Got some yellowing so I added 1tbsp alfalfa meal top dressed for nitrogen boost. Currently brewing a veg tea/ foliar spray. About 2.5 gallons dechlorinated water 1 tbsp alfalfa meal 1 tbsp kelp meal 1 tbsp super fly insect frass 1 tbsp crab meal. Half tsp molasses Half tsp fish emulsion Will feed/spay tea on day 39 (48 hr brew) For veg tea. Will spray plants foliage with NeemMax today (D37) to start fighting thrips or any pest. Day 38 decided to feed with a bonide mixture. About 3-4 tbsp per 2 gallon split between the veg plants sprayed into soil and roots. Aswell as a light spray for each plant in the flower tent although those plants seeem to be doing better I have yet to inspect. Wanting to keep areas as separate as possible while dealing with veg tent first. Day 39 plants drank up the bonide mixture surprisingly overnight and feed the Veg tea about 40 hour brew. Looks prime time to use as well lots of bubbles indicating microbe activity. Also sprayed folliage with the tea and lights off for 15-20 to let leafs dry off first. Also .. slight issue I’ve been measuring my umol incorrectly.. my measurement reads in lux and Foot Candles.. Basically I was giving my plants about 50-80 Umol instead of 400-600 like I thought. Same for flower. That being said very impressed with what I have achieved with very minimal light. Hopefully my plants won’t get stunted from the correct light.

All the photos are in the 8x8 now. just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Flowering day 15 since time change to 12 / 12 h Hey guys :-) This week the ladies developed beautifully 👍. The stretch has started very strongly :-) . Watering was done twice this week with 1.2 l (see table above for nutrients). The heating mat does exactly what it is supposed to do, you can see that the ladies are doing perfectly again 😃. Fresh osmosis water was mixed with tap water in a 100 liter tank so that I would have enough stale water for the coming week 👍. Otherwise everything was cleaned and checked. During the check, I noticed that after spraying neem oil 3 times, there were still a few damn trips to see. I have ordered nematodes for leaf and substrate against tripse. Then they should finally be gone again 🙏🏻 have fun and stay healthy 💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

02/15/2021 In the first pic you will notice bottom growth which will become my new moms! At least 3 there now. Top is stretching nicely I will have to decide soon if I want to top her or not, I will know better next week. 02/17/2021 Got two cuts today maybe two more by next week. 3 for the garden, 1 for mother plant. Ps. She grew an inch and a half in two days, so all is well. 02/20/2021 Stretching up to 13.5 inches(34.9cm) almost 5" in less than a week, I think she is happy! On a side note lower growth will produce two more clones for summer garden. can't wait to see her flower! I will probably need to top as she should stretch 1.5-2 X's in flower stretch. Till next weekly update happy growing!🙏

Things to look forward to this week: More defoliating! Just trying to strike that balance of airiness and photosynthesis. Plus, I gotta get rid of a bunch of useless back-budding throughout the girls. Focus on that canopy! New dehumidifer on the way. It should be running by Wednesday. Hoping to get down the 45% RH for some arbitrary reason! And it will help me cure better too. I keep telling myself the money is worth it. Started treating my water with some calcium hypochlorite, a.k.a. pool shock, at a rate of 2 PPM which I've worked out to 0.15 g for 50 L (my standard tank build). That doesn't sound like much, but it is detectable on the nose. I'm not concerned about 2 PPM ending up absorbed in the plant, it takes in a certain amount of chlorine anyway and this is well below cannabis' phytotoxicity, apparently. The takeaway: it's safe, just like using city tap (many places) to water plants. 8/5/2019 - The girls look great. Went through and removed a lot of growth with a better sense of what to cull. Snipped a load of bud growth branches that would never make it to the top. They were mostly skrawny sucker branches and a few that would have made nice colas if they managed to reach the light. Gonna be picking out root rot and treating with H2O2 for the dead roots from site 5. Starting to see some brown, just need it not to spread to the living plants. Treating with a 2 PPM chlorine dosage to the reservoir. Had to purge the accumulators anyhow, so everything is being treated with antimicrobial now. I won't get to see them until after work tomorrow, any changes in health will be evident. 8/9/2019 - Dehumidifier #2 arrived today. It shows delivery at 12:20 and the driver placed it right-side-up, so I am good to start it right away. Immediately, I am a little surprised at how warm the air is coming out of this thing. I'll keep an eye on temps.... 8/10/2019 - Wow, the reservoir from the dehumidifier filled up in the middle of the 12 hour cycle and shut off automatically. Really pulled a lot of water out of the air! The temps got too high though. Not too long after lights on today, they temp read 90 degrees F, and I can't have that. Moved dehumidifier outside of tent and now draining into 5 gallon bucket. The tent is moving enough air that the humidity inside and out is the same. Seeing if it can lower the humidity enough outside the tent to benefit.

Overall, this plant was a producer! Easy to grow, no surprises and stayed healthy throughout. 11 weeks from seed to harvest. It was squat, but stacked, so airflow and humidity control were key to preventing powdery mildew or bud rot. Took the nutrients like a champ, didn’t show too many demands. I’d like to run this again to see if I can get them taller, to potentially produce more. Otherwise, a very good, potent strain choice for someone who is short on space, and would do well with a sea of green style…Happy Gardening 🇨🇦👊❤️

OMG OMG OMG finding hard to put on words all i am felling with this one, she was a delight to grow and without trying yet her medicine she wen strait to my top 3, i mean super strong Mama, strong to everything pests you name it, amazing structure her terpene profile is taking me back to the 90s with her almost like gasoline smell mixed with limes and pines OMG cant wait to try out this one much but much respect to DutchPassion on this creation of them she is so so so , like glue that you cant touch without getting it everywhere <3 <3 haded the last 3 weeks and harvest time-lapse i fell like this one could have gone more than the 71 days in flower that she did, but there is no time for that in this run but i will run her again thats for sure and a must for me. Guys trust me on this one , she is a must , a real must in any garden <3 <3 <3 Thank you so much Dutch Passion for this blessing of an opportunity and for everything you guys do for the community much respect and appreciation <3<3<3 Everyone best of luck for the contest this was an amazing and fun one <3 <3 <3 As always thank you all for stoping by for the love and for it all, i truly appreciate and enjoy the ride so much more with you guys around <3 <3 <3 you guys make me fell super blessed <3 <3 <3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #growerslove #dogdoctoofficial With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing in return and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 More info and updates @ https://growdiaries.com/grower/dogdoctor https://instagram.com/dogdoctorofficial https://youtube.com/channel/UCR7ta4DKLFMg2xxTMr2cpIg <3 <3 <3 Growers love to you all <3 <3 <3 I will post more photos from her dry trimmed bud report smoke etc asap <3 <3 <3 and need to clean space on my iPad so that i can upload the rest of them photos and videos , my apologies <3 <3 Done hehehe waiting on this beauties to dry now <3 <3 <3

She was transplanted into her final home (18 gallon), we added extra EWC to her new Promix..she's still having some nutrient uptake issues (definitely getting enough to eat)..we decided to drop her PH to 5.0 to see if this helps and we decided to hold off on flowering her until her color looks a little better... we gave a small dose of bloom, we like to do this 1-2 weeks before the start of flower with all our plants.. thanks for reading, happy growing 😻

Semana número tres y todas van perfecto en su crecimiento , con su climatización controlada . Una vez por semana aplicó preventivo de plagas . Y mantengo áreas desinfectadas . Potencia . 250 w por mt2 .

Se riega lunes, miercoles y sabados con 0,4L de agua. Se transplantan 2 esquejes que no habian enraizado. La altura de las plantas varia entre 10-25cm.

Día 02. Tuve que empezar la floración. Las raices estaban empezando a salir por el caño de descarga. Además estoy notando que al quedar mucha agua atrapada entre las raíces, la toman más rápido y los 20 litros que puse no sé si van a alcanzar. Ya había tenido este problema hace bastante y me había olvidado. Pero igual no me preocupa tanto. Sé que puedo manejarlo tranquilo. Así que al final, la semana anterior fueron sólo 3 días. Ahora voy a ir planificando bien, dado que la diferencia de altura en una de las Polaris, me va a obligar a ir llevando un LST riguroso. También estoy empezando a pensar en formas para evitar las tapadas de raíces. Creo que algo se me va a ocurrir para implementar en algún momento. Voy a hacer un corte de hojas muy grande cuando haya terminado el estiramiento de pre flora. Porque quiero probar cuanto afecta a una rama el quitarle la hoja principal. Algunas he cortado y otras cuantas no. Apliqué Feeding Enhancer de Greenhouse, en forma foliar la noche que pasé a floración. Voy a hacer una nueva aplicación en una semana seguramente. Tuve que bajar la frecuencia de reigo de 30/30 a 15/45 por hora, porque creo que eso hizo que se hagan tan grandes rápido. Igual es un dato que voy a tomar en cuenta para el futuro. Día 04 Me preocupa la velocidad a la que se toman la solución nutritiva. Les puse 20 litros hace 4 días y quedan solamente 12 litros. A este ritmo voy a tener que empezar a poner mucho más de los esperado. Aunque igual, creo que cuando haga un trim fuerte de hojas, ahí van a empezar a regular más el consumo de agua. Además al haber crecido tanto las raíces, es mayor la cantidad de solución que queda estancada en las raíces y es consumida. Así que eso también será un tema a mejorar. Me gusta que las plantas estén así, pero siento que no las voy a poder controlar.