Things are taking shape. VPD in check, girls are just praying and loving their home. A constant 78 with lights on and a small drop at night. Top feeding twice daily for 90 seconds per feed. This is enough time for the hempy hole to overflow. These girls were topped a few days ago and recovering nicely. A few weeks of veg and this room is going in to flower! And thats when the fun begins Follow my son Budxless on his first grow

Great after the mold issue during clone. Recovered good and nice yeild 4.4 Oz tops and mids 3.8 g of rosin and a few Oz of trim to process but man is this stuff good

Everything is great the young ladies are happy and that makes me happy

We used a 200L rain catcher to brew feed using General Hydroponics. Worked well, we just needed to add some PH solution as it was slightly acidic. We definitely made a few mistakes when transplanting last week, next season we will be doing things alot differently in terms of homes so they don't have to get transplanted so often.

Both plants are into the final maturing stage now I think. #1 looking to be more dense, #2 longer and fluffier. Very temperamental with the nutes, shows signs of burn and deficiency, I think I'll leave with just water from here on out.

It was easy to harvest she was very small jut cut it quickly without stalks the wet weight is 17 g of the buds, nicely coated with THC and it was approx 70% milky and 40% amber trichomes. Hopefully good time to be harvested. This site has changed can not update and edit the comment section. The smoke is nice it is kind of relax and strong high. Not the best but not bad at all. I like it.

Swapped out a light that’s slightly too big for my tent but squeezed it in with minor cuts to the tent. Probably should’ve done it sooner. Can only run the light at 50% or below.

Que pasa familia, vamos con la quinta semana de vida de estas Black muffin F1 de Sweetseeds. Vamos al lío, me quede con 3 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. También se trasplantaron a su maceta definitiva, en este caso de 7 litros y el trasplante se realizó correctamente. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. Aunque no han marcado ya cambié el ciclo de luz a 12/12. Hasta aquí todo, Buenos humos 💨💨💨

Zum Pressen waren beide Strains super. Angenehm zum Rauchen und ertragreich. Terps sind hauptsächlich Citrusnoten.

Hola amigos verdes, Beelzebub is in safehouse with her green sisters for the last few days, bc of bad weather and 💩 Its now dry for a minute but lots of rain is expected.. Luckily safehouse is nice and cosy 🙏 i think (hope) next week gonna have some sunny pix again...😎👊 She has done some 'demonic' stretching this week, she doubled in size, to make room 4 her demonic buds 2come 👹👌 Happy growing 4all ✊ *KISS! growingtechnique: KeepItSimple, Stupid!

Welcome back, Other that the time lapse looking like an earthquake went off the RED POISONS are kicking ass the DARK DEVILS did not respond as favorably to the super soil. look like N toxicity! I thought it might have been over watering, but I let them dry out a bit this week and let them use the water left in the soil instead of watering the reservoir again. the DARK DEVILS look liked they stretched this week and there is no sign of nutrient deficiency. give them a drink on Saturday and re hydrate the soil.👍

July 20: smoke arrived this morning to go with our heat wave. Awesome. Extra watering, misting air, and wetting the sides of the grow bags with hose water to keep things cooler and hydrated. So far so good in the heat. Did foliar spray of Extreme Blend and potassium silicate. Also note that for all my grows I use apple cider vinegar for pH adjustment and a Dr Bronners liquid soap as a wetting agent (surfactant). Euphoria is doing great, but to ensure that it finishes early enough for this latitude (53N) where the UV light gets very weak after mid-August, I’m starting the force flowering tonight. Already starting to flower but I want a strong flower set and as much flower growth under strong sunlight as possible. Force flowering schedule is 2-3 weeks of in dark garage at 9 pm followed by 730 nm far red light and then back out at 7 am. The light initiates dark mode 2 h faster so it’s like having a 26 h day. Good trick use as a bloom booster, also moves up the finish 2-4 weeks. So, 10+2 is 12 h dark and 14 h daylight. Might sound bogus but it works. July 21: first night of force flowering caused a big stretch. Notably stretched after darkness in hot garage overnight. Hot outside overnight too but was much hotter inside garage and recorded here as 24 C. Seems okay and high overnight temperature might be ideal at this early flowering stage. Warm overnight temperatures continue for a few more days. July 22: record hot overnight low forecast for tonight of 24 C and feels like 27 C with humidity. Wow, that is really incredible for here and 13 C above historic average. July 26: six days into flowering and she is doing fine. 👍👍

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Día 13 (06/05) Nos acercamos al final de la fase plántula. A ver si ahora empiezan a crecer de forma explosiva! He sido muy estricto con los riegos, dejando que el top hasta el nudillo se seque completamente! Día 14 (07/05) Hago una mejora en la tienda. Hasta ahora tenia intracción pasiva, pero ahora he instalado una turbina para que impulse aire fresco dentro de la tienda Día 15 (08/05) Con el calor que hace me sorprende que las macetas sigan aguantando la humedad, pero al hundir el nudillo sigue húmeda. Mañana haré un riego de nuevo Día 16 (09/05) Relleno el top con sustrato para compensar la compactación y dar mas soporte a las plantas Riego con 300 ml solo H20 - pH 6,2 Día 17 (10/05) Baño de sol de dos horas. Día 18 (11/05) Baño de sol de dos horas Día 19 (12/05) Riego 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l - pH 6.2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Day 127 Mon PH 5.9 EC 0.1 PPM 40 DLI PPFD Water 19c Day 128 Tue Add Ph Down PH 6.3 - 5.9 EC 0.1 PPM 60 DLI PPFD Water 18c Day 129 Wed PH 5.9 EC 0.1 PPM 60 DLI PPFD Water 20 Day 130 Thu PH 6.1 EC 0.1 PPM 70 DLI PPFD Water 20

It was time. Her trichomes are cloudy as the weather today, with just a couple ambers. Total wet weight of the buds was 390g 😳😳😳 I kept 200g for myself. The rest was sliced, diced and was given to the worms. After drying, there should be about 40g. Have I said already how much I hate this local law 😭 She smells delicious nonetheless! And is as sticky as a yellow fly trap 😂 Had hoped for more color though. Next time I run her, I'll see if I can keep the temps under 25c. The stalk and stems were all pink and I suspected the rubarb color was from Mg deficiency, but she persisted through 1.5g/l of Epsom Salts, so I concluded she wasn't deficient. She was a true pink pheno! ----------------------------------------------------- It was a fun experience, with a couple challenges during the grow! Definitely repeating this cultivar in the future! Thank you Kannabia for this amazing strain!! Thank you Spider Farmer for the amazing gear!! Thank you Plagron for your amazingly stable nutrients and medium!! 😍😍😍

Rainbow Candy