Great harvest, I was impressed with the quality of this strain. After the drying and curing process, I'll give my feedback! 💪

Actually using dry amendments and pH water

Everything seems ok👍

Feed them twice might see a lil burn next week or just over water there still going up thought they would have stop by now looks like going have nice hard both going have hard rock Nuggets on them

Entramos en la 9 semana y seguimos con heladas en el exterior , las mínimas con luces apagadas son de 15º y las máximas con luces encendidas

Per me sta venendo su una meraviglia.. Sono molto fiducioso nel gran quantità di raccolto che mi darà e soprattutto della qualità... A S

SUMMARY: - I killed my first to tap-root seeds, I waited for them to grow "by the book" 0.5cm and I should have just planted, I saw them get worse and said "I must of messed up with something, lets wait another night until they bounce back" and instead they died. The next germination was super easy but my lights were too high, and the humidity was too low. All the fixes were done for the next weeks. Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Specifications:😎 Seeds: - 2x White Widow feminized seeds from Crop King Seed Tent: - 4x4x6 Mammoth Grow tent LED: - 2x Spider Farmer SF1000 LED (default 100 watt draw for seedling but will be bumped up to 125 Watt for flowering if not sooner) Pots: - 2x 0.5 L starter pots - 2x 5 gal smart pots after transplant Soil: - Pro-mix containing mycorrhizae and perlite, used for starter pots and mixed at roughly 1:3 ratio with Ocean Forest - Fox Farm Ocean Forest soil, used in the 5 gallon pots and mixed with roughly 3:1 ratio with pro-mix - note: pro mix was mixed thoroughly with ocean forest in the 5 gal pot, then pro-mix was used on the top layer, in and around where the transplant will be to help the early veg stage avoid getting too "hot" via nutrients. Nutrients: - Fox Farm Big Bloom - Fox Farm Big Grow - Fox Farm Tiger Bloom Inline Fans: - AC Infinity CLOUDLINE T6 6" (exhaust) - AC infinity CLOUDLINE S6 6" (active intake) - AC infinity 6" ducting Oscillating fans: - 2x Wind Devil 6" fans Carbon Filter: - 2x iPower Carbon Filter on both inline fans - note: carbon filter on intake fan as basement had mold issues in furnace room far removed but same floor, some mold issue in other room, cat litter in basement, thus, avoiding all risks and sleeping sound at night :) all mold was killed, scrubbed, cleaned, sprayed, painted, and sprayed again before setting up. Humidifier: - TaoTronics Cool Mist Humidifier Timers: - 2x Kuman 15A/1800W 24-Hour Digital Timer Overall: Good start to the grow, germinated 2/3 seeds, both growing and healthy. Both seedlings have developed their cotyledons and although they initially were quite droopy, they often bounce back to a decent upright/natural position. Third seed is undergoing "emergency germination" for the next 2 days as it experienced identical conditions to the other healthy seeds yet failed to germinate, likely due to its unviable nature. Waiting for extension cords to lower the lights further and a humidifier to hold rH steady in the next day or so. The seedlings appear to be reaching up for the light, stretching, but it appears to be within the acceptable range as they are upright and sturdy. The seedlings often get a little droopy, it is likely that this and even the stretching can be blamed on low humidity, temperature swings between low 60's up to 81 F. Nov. 2 - I killed 2 germinated seeds by waiting for tap root to grow to 0.5cm. - note: tap root looked great but was quite short so I waited another day for it to grow as instructed, the next day it looked like it had suffered, I assumed it was something I did like too damp, or too dry, but it really just needed to be planted before tap root grew to 0.5cm. So i waited another day to see the bounce back this time carefully ensuring right amount of dampness but when i looked it was clearly dead. RIP 😭 Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Summary of week: - A rocky but good start has resulted in 2 healthy seedlings with a decent set of serrated leaves. - MY growing pains and on the fly adjusting of grow tent climate likely resulted in a little bit of a tough week for the seedlings. LED hanging too high likely off the start (started at 60" and got as low as 30"), low rH (going down to as low as 40% and never really getting <60%), and poor temperature fluctuations (going as low as 61F early in the morning when the lights go off for 8H and as high as 81F when the lights are on for some time). - Luckily these factors did not do much damage but in all likelihood just resulted in a slower growth rate. - After initially planted into damp soil, I only watered once, with only 50ml for each plant and mostly watered around the edges of the pot.

12/4 : Most of them are getting out the soil. Pink Gasolines are the slowest to pop off. 💪 Had to manage the pot space in the dome so there's currently 2 seedlings per pot. 16/4 I have now moved all the plants into a bigger 120x60 tent. Also a friend loaned me an old 600w LED fixture (Horticoled XMAX6 V4) until i get my Migro Array 4 240w There's now a humidifier in the box and they are in bigger pots now 💪

5/21/25 beautiful plant. Yellowing is starting. Thinking it may be a magnesium def from using new Nutrients. Took some clones and should be putting her into flower soon 5/22/25 not sure whats going on with her but shes nooot happy at all. Sprayed with spinosad. Top dressed uprising foundation which is a calcium magnesium sulfur and iron amendment. Hoping that may be helpful

Here we are again ready to start again, always under the sign of Zamnesia, we make our fantastic plants and we show you what we are capable of. We have 5 autoflowering strains and 5 photoperiodic ones and now we present them to you. This time we are faced with an absolute novelty Zamnesia, a plant of the latest generation of an immense series that Zamnesia is bringing out, ready to try them all. Here we have excellent parents the primette result very well, let's try! To explain my germination method which is a combination of experiences acquired in the field and readings of right advisors, I have chosen to divide it into phases so whoever wants can follow them and understand better step by step. - Preparatory Phase ---- Check the average temperature in the room, humidity status to understand well whether it is the case to start or wait, I decided for the end of August because the temperatures begin to drop towards the 22-25 degrees recommended for germination. Then another thing more or less credible depending on the sensitivity is the control of the lunar phases. I believe in it a lot, it is a method that ancient farmers used to understand when it was best to plant depending on the attraction of the moon. To make my life easier I use a simple app that advises you on the right time to plant, harvest and put in a jar (depending on the lunar phases). - Phase 1 --- Soaking in water. There are many authoritative friends who advise against this method due to the risk of drowning, but I have always been fine and I follow the rule if it opens in water almost certainly the seed is healthy and will come out of the ground 90% normally. - Phase 2 --- Opening of the seed in water. As soon as the seed opens and the root comes out a little you have to be very very careful not to leave the seed in water open for too long. This is why there is a risk of drowning. So as soon as the root has come out it must be planted. Do not wait for it to stretch out too much, in the absorbent paper you can wait a little longer in water no. - Phase 3 --- While I soaked the seeds I prepared my pots: I use small biodegradable pots (choose the ones with holes underneath for drainage). A few hours before working with the opened seeds I moistened the soil with water adjusted to the right pH (5.8 - 6.2) and Plagron Power Roots. The small root is now open and we can make a little hole with a toothpick, widen it and insert the seed. Not too deep with the root facing downwards. From Serious Seeds we learned the dome technique: if you put a small dome of soil on the seed the water will settle on the sides avoiding overwatering problems. - Phase 4 --- The plant emerges from the soil. Up to now I have not put the light on, now I turn it on at minimum after half a day of soil to give direction to the seedlings. The first week the light will be gradually brought from 40% to 60% to go to 70% - 75% in the remaining weeks of veg. During the first week maximum, I keep the cycle of 24 hours to avoid stretching. Be careful not to exceed the first week at least with photoperiodic. - Germination % --- In water 20/20 seeds have opened for superstition I wait to talk when they come out of the ground but it seems that we are going towards an excellent percentage of germination..."Not too bad"... - Soil and Food --- The soil used is entirely organic in every part and is the Plagron Promix that will be used with the 100% organic pack provided by Zamnesia complete with all the main fertilizers for your plant buy it at the link -- https://www.zamnesia.io/it/11457-plagron-easy-pack-natural.html // Strain Description //cross of Alien OG and Rollercoaster Haze, Cosmic Noodles offers excellent yields and extraordinary aromas. This variety is very powerful, contains 25% THC and produces intense and long-lasting effects. Stimulating and relaxing at the same time, Cosmic Noodles causes an energizing cerebral effect that fades over time becoming soothing at a physical level. - Get a seed of this fantastic strain --- https://www.zamnesia.io/it/10777-zamnesia-seeds-cosmic-noodles.html - Soil and Fertilizers entirely organic --- https://plagron.com/en - Growbox --- https://www.secretjardin.com/ - Music and sound --- I made my girls listen to 432hz frequencies and music from www.radionula.com - Z --- You can find these seeds, much more from the world of cannabis, mushrooms and an incredible series of accessories and gadgets on the reference site not only mine but of many growers ---- https://www.zamnesia.io

Went from 60 to 90's. First day with humidity....come on rain, give it to me. Leaving the greenhouse wide open so not to overheat. Set the damaged plant in a chained hanging basket to allow sun absorption all day and keep her off the ground for now. The weather is changing into serious growing mode and they love it. Stems are bulking up and holding well against whatever the weather Gods can throw at them. They are adapting to LST very well.

Soo, I think I can start to call it the first week of flower. #2 definitely is showing a few white pistols, #1 is just starting her first set and I'm pretty sure #3 will shoot them out any day! Also seems that removing the lowest two side branches of #1 was a huge success! She basically is the same hight as the others BUT I LST her a bit to expose the smallest side branches out of the three to more light! Also, I put a little elevation for her, so they stay the same high. #3 is doing #3 things and continues to grow rapidly. Topping her was the right move I think. I'm quite new to autoflowers (I mean pretty much in general but I had one random regular seed run before this but that's it) so I hope, I didn't call it too early but I'm positive:) Also my new microscope and the Blumat drip irrigation system finally arrived. I heard it can be a bit tricky to get it running but once it runs, it should run like a charm. Very very excited for this since I'm planning on going living soil in the future, which should fit very well together. Before installing the system, I removed the first set of true leaves of #1 and buried the wounds in soil. I hope she will build roots there. With #2 I took scissors and scratched up the main stem and filled it up with soil. As well I hope for more root growth. #3 just got a little bit more soil without any extras because of the topping. After doing all that, I watered with the BioEnhancer. I took 0,5g/l and around 1,5l in total. Quite a lot of update for just one day haha. Flowerpower baby! Didn't really have the time for further updates besides pictures. I did defoliate all 3 a little bit and keep fine tuning the Blumat. I think it's working quite well so far. #3 has some little spots looking different but nothing major I feel. I'm more worried about #2. Her tips start to yellow up a little. I hope it's because she grew too fast into the lights and now where I pulled lights back up to 35cm, she will be fine again

One of the Lemon Cherrys is falling behind the other then that they look pretty good Date : 19.06.2024

Initial cuttings entry for this journal on the to-be-pollinated F2s. We’ll be backing out each plant specimen against some F1 pollen in an effort to trait stabilize the best bud of the lot. Still debating on pushing my luck with just the aero-cloner through the whole shortened cycle. If not I’ll have to cobble together some sort of shallow dwc bin from scratch to accommodate them for the long haul. Pollen as soon as we see prevalent pistils. ***Grow notes: 2 cuts from each plant specimen against- #5 potentially a male. All lookn great and perky post-cutting. Let’s hope the F1 pollen is still preserved🤞🤞🤞.

MATARO BLUE by KANNABIA Week #10 Overall Week #9 Veg This week she's doing good no issues to record this week she's dealing with the heat well. Stay Growing!! Kannabia.com. MATARO BLUE

Ich hab ein paar Änderungen am setze gemacht, der hintere Lüfter bläst 2x für 15 min pro Stunde kalte frische Luft von draußen. Außerdem habe ich den Spider Farmer 6l Luftbefeuchter, zwei oszillierende Ventilatoren von Mars hydro und ein Standventilator hinzugefügt. Diese Woche hab ich nach düngeplan gedüngt ein mal.

may 19: day 22 flower half strength nute scedule from GHE without additives

Growing

Gorilla Cookies has been growing good. She is just getting trained out for the foundation to flower on. Everything Is looking good under the Spider Farmer G3000 light. I will likely switch to flowering come a week or 2. Thank you Spider Farmer, and Pure Instinto Seeds. 🤜🏻🤛🏻🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash (stackable)