I did some defoliation and pruning of lower branches at the start of the week and this plant hasn't recovered as much foliage as the CBD Blue Shark, even though this one was bigger until recently. I think the plants have a preference for being on the left, right underneath the filament part of the light bulb. I also still need to finish the right wall and put white mylar on it. Maybe I will switch the plants for a bit.

420Fastbuds-FBA2507 I'm excited as it's tester time. Germination week is complete. I planted 3 seeds and had all 3 sprout within 48hrs of being in the soil. I do soak them for 48hrs in a glass of water before planting. I can't wait to see what the weeks to come will have in store. Happy Growing

Topped Monday Changed Monday Big defoliation Friday

🗓️ Week 7 complete – 3rd week of flowering This week I had to slightly adjust the feeding schedule – I was running at ~75%, but Seriotica started showing light tip burn. Dialing it back a bit now to stay on the safe side 🌱 All three plants were lollipopped, so energy now goes straight into the top sites. The stretch seems to be wrapping up – and the final height says it all: 📏 Final height after stretch – Seriotica: 77 cm The tent’s definitely reaching its limits – lights are at max height, and there’s not much headroom left 😅

Medium: Yep - still gonna beat on the DWC drum. It just gets better and easier every run. Almost religiously changed out the res. every week and this was definitely overkill. Could’ve easily gotten away with every 10 days to 2 weeks. Stuck with peroxide this run again instead of going with bennies via hydroguard or hygrozyme. The results speak for themselves on a 6 week veg. That’s for sure. Still save’n them dolla bills on the nutes too. Minimal nute mixing (as well as simplistic regime) and for what we’re using in each res. - gotta be easily a 50-60% savings on nute consumption vs. more traditional methods. Honestly makes one wonder why organic soil grows are seemingly all the rage. I’ve found terp. Profiles, structure, plant health and of course yields to all be just that much better in straight water. What more can I say, we love our DWC. Method 🎚️🎚️🎚️ The dueling methods were the whole point of this grow. Our best attempt to illustrate the differences between LST vs. LST/Topping ie. just how significant is the difference in terms of overall production? The truth of this test is a bit of a double edged sword. On the one hand, topping does have a significant effect on overall yield. This fact is regardless of whether or not from seed or clone.That said and when it comes to clones, you still have to be mindful of the drawbacks of further dividing (and thus reducing nug size for) main branches. Our topped clone #2 is a perfect example of this. While the structure demonstrates significantly more branching, the nug sizes are also significantly smaller. As you’ll see in the yield details it does somewhat make up for this through a higher overall weight but it was also a much less manageable plant than #1. Root mass on the topped plant was heavier and bulkier, drinking much more water than its counterpart. And in late flower half the plant was pretty much falling over. While some of this is attributable to the extremely hollow stems (and thus a carbon deficiency), making the most of the grow light proved difficult with the topped plant as bushy as it was. Basic summary - if ur cloning for profit or efficiency, stick with straight LST and grow a whole bunch of em. If I had to do it again I don’t think i would’ve bothered with topping - just for the sake of greater ease🤔🤔🤔. Then again, I’m greedy as fuck when it comes to my yields so I Could totally see myself trying to max everything out and go for broke🤙🤙. 3/5 volume bars for the rating - we accomplished what we were trying to. Yield/Harvest🌴🌴🌴🌴 Awwwwwe yeah - down to where it counts and these girls were champs💪. While internodal spacing was longer than necessary and overall bud size was smaller than average; these plants pushed out some solid weight👍😎👍. Ran er through a 7 day dry and all jarred up on a slow cure. Final numbers: Total yield - clone #1: 5.14oz = 143.92g Total yield - clone #2: 6.01oz = 168.28g Approx. est. yield: 600g/m2 divides by 4.8, multiplied by 2 (approx. for 2/3 the cabinets sq/ft) = 250g per 0.41m2 Actual yield: 11.15oz. per 0.41m2 = 312.2g per 0.41m2. That is some seriously good production right there😎👍😎. The high end avg. for this strain is 650g/m2. When you crush that out to my space and the numbers above, it works to about 270g per 0.41m2. Our actual yield still destroys the high end avg. by almost a zip and a half👍👍👍. The cree cob does it again. Fuck’n jazz hands y’all🙌! With results like these you could really give the whole grow a 9/10. It’s only an 8 in my book because it’s not my preferred high. Otherwise, any time you’re north of 5+ oz. per plant, it’s a good day at the office👍👍. Props👊👊👊 No choice but to shoutout Humboldt genetics. These beans have treated me so well and I can’t say enough Good things about the strains this organization puts out👌👍👌. Other than that, thanks to everyone who dropped by for a look and a comment. The convos always good and of course - any questions or enlightened conversation are welcome. Every time I try to take a break from documenting a grow, I end up growing something worth documenting. If your as high as I am right now, you should still be trying to figure out that last sentence.... stay lit y’all. See ya soon on the next one👊👊👊.

Dia 95 de vida , hay dos fotos que son del dia 91 de vida antes de amarrar las plantas, las demás fotos son actuales. Hay una ola de calor esta haciendo mas de 35 grados celcius y hace mal tiempo de un momento a otro puede hacer alguna tormenta así que decidimos coger las plantas para ayudarlas a resistir en caso de temporal. Siguen creciendo y estan monstruosas aunque las indicas ya van marcando pistilo yo creo que aún tardarán en florecer por el momento todo va genial esperemos que no nos arruine el cultivo ninguna tempesta.

Everyone is officially in flush mode, washing away all the chemicals in the coco and attached to the roots, making sure I flush them with atlas 50% runoff, I flush em with 14L of plain PH water at 6.4.

Lets start.

2te Woche beginnt. Bisher läuft es glaube recht gut … Die kleinen wachsen brav … Habe mal 2 weitere Nutrients hinzugefügt und Versuche den VPD Wert irgendwie konstant zuhalten 🙈👍 Dank 4 Blumat Classic pro Topf reicht ab und zu bisschen sprühen aus dem Befeuchter… heute das erste mal die kleine Pflanze abgedeckt und ganz leicht von oben die trockene Erde mit den neuen Nutrients zusätzlich befeuchtet. Mal schauen was sie so bewirken …

Week 9 (27-3 to 2-4) 27-3 Temperature: 25 degrees (lights on) 18.9 degrees (lights off) Humidity: 63% (highest) 55% (lowest) Added 15L to the reservoir. 28-3 Temperature: 25.1 degrees (lights on) 18.5 degrees (lights off) Humidity: 64% (highest) 56% (lowest) 29-3 Temperature: 27.2 degrees (lights on) 19.4 degrees (lights off) Humidity: 67% (highest) 48% (lowest) As you can see on the pictures, the Chemdog #2 has a flat stem. I dont know how, but the same happened with the grow before this one, but to a Biscotti from a different seed bank. I never seen this before, so i am really surprised to see this happening back to back. Does anyone know if its just coincidence or can lightstress or LST/HST cause this? 30-3 Temperature: 25.3 degrees (lights on) 20.5 degrees (lights off) Humidity: 65% (highest) 54% (lowest) 31-3 Temperature: 25.8 degrees (lights on) 20.8 degrees (lights off) Humidity: 62% (highest) 56% (lowest) Today i decided to turn of the reservoir/autopots. I think the plants are overwatered, and because of that probably have light stress and other problems. Also, it can be that i underfeeded them, and that the PH was too high. I turned the light down to 40% strength aswell. 1-4 Temperature: 23.6 degrees (lights on) 20.6 degrees (lights off) Humidity: 62% (highest) 57% (lowest) 2-4 Temperature: 22.6 degrees (lights on) 19.8 degrees (lights off) Humidity: 62% (highest) 56% (lowest) No pictures.

22 days since my little girl sprouted from a seed🌱 Third week of growth for my Purplematic CBD Auto ⚕️💚💜 Nutrients: Plagron Alga Bloom is an organic flower fertilizer for growing in soil. The fertilizer is based on algae and contains amino acids, proteins and a balanced ratio of phosphorus and potassium 🌺 ---------------------------------------------------------------------------------------------------- Plagron Green Sensation is a flower booster. Green Sensation is a 4-in-1 product, so you don't need to add additional fertilizers. Suitable for all types of substrates and systems 💚💜💚 ------------------------------------------------------------------------------------------------------------------- Bud Candy is a carbohydrate supplement from Advanced Nutrients that maximizes the growth and aroma of flowers. It supports strong root activity by providing food for beneficial microorganisms ------------------------------------------------------------------------------------------------------------------- BioBizz Calmag is a 100% organic, but also vegan-friendly fertilizer with BIO certification. Biobizz Calmag was designed for professional growers and home growers who need an extra dose of calcium and magnesium. It contains added humic acid 💩☘️- I only apply it once a week. --------------------------------------------- Biobizz Bio pH-/ Biobizz Bio pH+ is a 100% natural and vegan-friendly pH regulator. Suitable for all types of substrates and crop types. For use in growth and flowering. 💩🍋🌱 ------------------------------------------------------- PRO-MIX CONNECT MYCORRHIZAL POWDER - in the substrate General: Purplematic CBD Auto ⚕️💚💜 The plant is already strongly transitioning to flowering, beautiful white pistils are forming on the tops 🌺 Above I listed the nutrients I switched to during this period. Anyway, I stick to organics, except for the bloom booster, which is about half organic. This week - the third week - in most cases, she does LST and defoliation twice 🍃 🌿 The girl has very curled leaves down, they practically grow like that. I have no idea how it could have happened. She is not even overwatered, there are no problems with nitrogen and I measure the ph and ec regularly and she is fine. All the other girls in the tent look good, only this one is like that 😢💚💜. It looks like there will not be much of a harvest, probably unstable seed, that happens. But I am sorry because I use pure CBD to make tinctures. I use the new PH and EC meter Aqua Master Tools P110 PRO, the measurement is fast and accurate. So far I have managed to keep the PH and EC as they should be. I use Biobizz Bio +/- to correct. These are excellent products. I think that the plants are definitely very well affected by the spraying of the Vita-Race preparation and the excellent PRO-MIX Connect Mycorrhizal powder to support the roots. All the girls are very strong and stable since they were little 💚 Training: As I mentioned above, I did the first LST and defoliation, the plants usually quickly re-leaf, other branches will grow quickly. So in this third week I do two defoliations and two LSTs 🍃🌿 🌺 But I didn't cut this plant much, it doesn't have many leaves and I need it to go well for photo shoots The girls grow in a tent: Mammoth Pro+ 80, with reinforced reflective Mylar 600D foil Lighting: Mars Hydro TS1000, this light is sufficient for lighting in my growing space. The plants respond effectively and the light is technically very well managed - I try to have 50cm between the light and the plants, so I regularly move it up. Mars Hydro TS1000 Quantum Board 💡💡💡 Power: 148W Dimensions: 90 x 90 cm Dimensions: 360 x 330 x 34 mm Chip brand: Epistar Thanks for the likes See you soon 😍😻

Everything is going good, this week covers from Dec.4 to the 11th. The plants had a major accident due to me not securing the light and not realizing my kids slamming the fridge would knock it free of the stand, leaves were burnt by led light but luckily the plants were praying and it just burnt the tips of the First Single leaves.

Questa runtz sta iniziando a fare i pre fiori adesso 6 settimane si è allungata. sarà la più bella di tutte..,.. gli ho fatto una piega al apicale perché si sta allungando troppo confronto le altre. .. altrimenti devo allontanare sempre di più la luce dalle altre.... Quindi meglio un lst

Se aplico una apical y se afirmaron los brazos para que se vaya abriendo :3

Last feed was a week ago, have watered twice in the past week with ph'd water. Ladies are progressing nicely. Will feed tomorrow, and see how things progress. Got the dehumidifier and control put in, have it set at 45 rh, right now. Have seen the humidity come down substantially but still swings between 40 and 54. Thinking about lowering the setting a bit to around 40 to try and get tighter control as I finish out the grow over the next several weeks.

Pre-soke my medium with 2 ml of Quad ag Humonic and some PromixConnect

Hi friends ,👳‍♂️👳‍♂️👳‍♂️👳‍♂️ fifteenth day after switching to flower phase. the flowers are strong. The flower responded very well to the transplanting. I bend the flower every 5 days. This will be a very beautiful harvest if nothing goes wrong. 🤗 Have a nice day and thank you for watching.💚

🍬⛽️