Likes
Comments
Share
@Rangaku
Follow
This orange cookie is a shining example of dutchfem genetics , I do the same thing in the same conditions every time and dutchfem plants come out on top every time . Massive yields , chunky phatness, and solid handling all sort of conditions. I’ve had low temps of 8c and a heatwave of 40c and she’s handled everything thrown at her and continues to pile on the weight. A few weeks to go still and I’m happy as with what’s coming, she’s got this citrus tone and a cookie sweetness to her already. I clipped a few lower buds off for a preview in a few days ( not that you could notice, she’s huuge) . Keeping the feeds up and gearing up for a mad harvest.
Processing
Likes
6
Share
Всему пиздец. 2 Куста НЕ ЗАЦВЕТАЮТ / 2 plant no flower!!!! hight 120cm, nitrogen deficiency, short distance to the lamp. at the end of the week we made an upgrade of growbox. Так как парочка кустов не зацветает, перешел на принудительное цветение, режим 12-12. В последний раз поливаю бактериями. because several plants do not bloom, switched to 12-12 mode, the last time I pour water with bacteria.
Likes
8
Share
@Oldwied
Follow
Day 10 of flower The first flowers are growing. Happiness grows very fast. The living soil works great. Big thanks to florganics!
Likes
5
Share
Bonsoir à tous Je suis trop content de mes fifilles elles poussent vraiment bien elles grandissent tout les jours, je les mesure tout les 2 où 3 jours. Elles grandissent de 2cm environ par jour je les trouve magnifique mes fifilles. J'ai deux de mes mutantes qui me font quatre branches principales( on n'y voit sur les photos) je suis refait 😊😊😊 je pense qu'elles vont bien donner. Je vous dit bonne soirée à tous les amis 👍👍👍
Likes
22
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Sie wachsen sehr schön und machen keine Probleme.
Likes
1
Share
@Luxengrow
Follow
Growing nicely, in preparation for flipping amended in this week: - kelp meal - malted barley - gypsum - basalt - neem meal - silica & covered with small amount of homemade compost
Likes
5
Share
Haven't been remembering to post weekly updates! Everything is going great the auto flower girls are budding nicely and the other ladies are starting to flower nicely I'm giving alternating nutrients using a few different fox farm nutrient feed charts with my own take on them from notes an suggestions. This is the part that is so enjoyable but so stressful!
Likes
13
Share
@Medicanna
Follow
QUESTION TO EVERYONE READING THIS: My tap water is pH 8.3 (yes I know right ?!) Adding the BioBizz nutes brings it down to pH 6.2 - 6.4 depending on the amount which is great. Now, I dont really care about runoff pH that much, doesnt tell me a lot imo but I measured it twice, last time it was 6.8 this time it was 7.1. Is there anything to worry about or is that just irrelevant? Thank you guys :) Day 48: Watered the G13 Haze with 650ml Water and 2.8ml / l BioGrow, 2.8ml / l BioBloom, 0.7ml / l TopMax which is the equivalent biobizz week 7 feeding schedule with 70% strength on BioGrow & TopMax and 90% strength on the Bloom. Therefore, dont mind the leaves hanging down, I just watered before taking pictures. Also redone some of the LST by changing the "angles" of the side branches to use up space more evenly. Tied down a bit more aswell to even out height differences. Looks great so far, but the G13 Haze is quite a bit behind in budding, the Liberty Haze is throwing Pistils everywhere, the G13 Haze just started showing the first noticeable preflowers with pistils on the nodes. Day 45: I really wanted to try serious and "professional" training methods. Defoliation was obviously needed, I couldnt even see what was going on below the plant. Removed all leaves except on the top 2-3 nodes of each branch. Then I did some heavy LST to move the side branches to the outside for filling up space. I hope the center will grow some branches at some point. MOST IMPORTANTLY, since I wanted the main branch to slow down growth a bit, I twisted and "mashed" it between two fingers until I could hear a snapping noise and the stem became weak like gummy. It takes a lot of courage guy! A LOT. But it seems to have worked, the stem is not broken and I managed to tie it down without bending the whole plant. I am so excited on how this is going to turn out. ~Watered 600ml today Day 44: So yeah, definitely stretching ! The internodal space is way bigger than I'm used to from growing short indica quick ones. Funnily enough, the G13 Haze does'nt give off any smell at all apart from typical "green plant" smell (Just noted that because the Liberty Haze smells quite strong even though it doesnt form buds yet). Did some very very careful LST which looks good for now. I want to remove a lot of leaves and little side branching from the bottom as soon as the plant grows a bit bigger so I can access the bottom part better.
Likes
15
Share
@Sadhus
Follow
Ce run ce passe vraiment a merveille,aucun souci, plante vigoureuses et très saine ! Rien a signaler rien a dire ! Juste parfait ! Merci kannabia, Madame grow , et trolmaster !!! 🚫 Update, après une inspection hebdomadaire je viens de déceler 2 pied herma , que j'ai éliminé directement, plus que 5 plantes , j'espère que sa va allez 🤞 3 nouvelle hermaphrodite détecter, certaines avec des cloches, d'autre des banane plus subtil a détecté, un totale de 5 herma sur 7 , j'ai jeté les herma, grosse perte de temps et d'argent 😵
Likes
28
Share
This little girl started her journey on April 4th with germination into a water glass and finished up on June 27/20 – Day 78 from germination. She was a fun grow and was very resilient through the whole run. She spent most of her grow time in a 20/4 light schedule. She formed nice frost levels and stayed to a very nice and manageable height of roughly 20” tall without topping or bending her main stem. She was not as fussy about nutrient levels and took them well. She does like her medium on the dryer side though. Small little auto bush of OG Kush crossed with Indica genes😃 She would make a nice a plant to run while you are vegging out some photos for 6 or 8 weeks as she is not very big in size but will swell up and yield decent weight👍 She was grown in a 3 gallon fabric pot with coco coir and maybe 15% perlite. She was fed salt based nutrients……..so sorry but they are flushed out and that is what I am more comfortable with. Focus on the early growth with microbes, fungi and kelp!! She was fed the normal pattern with pH being held around the 5.4 to 5.8 range in feeding. Then as flower approached, I gave the pots a more consistent look at the runoff numbers and she was running 7.8pH coming out of her!!!!! WTF. She stayed in her pot that she was planted in and fought this issue all through the rest of her grow. The pH issues started surfacing around week 3….as we headed into flower of course. Scratching my head for weeks, I ultimately didn’t change anything other than really low pH feeding going in…….below 4 idea. For weeks she had 3.9 water going in and still getting 7.8 running off. I initially felt it was related to cheap fabric bags so I cut slits in the very bottom of the bags that stayed and tried transplanting other girls into plastic pots, which it can be fabric pot issues but I am not as convinced anymore for this run that there was an issue there, wasn’t sure about giving her Magnesium on top of Magnesium and therefore did I mess her up good on the inside early on in week 2 idea, out of options I changed back to RO water and that seems to have solved my issues……I was using tap water that was not filtered this run🤬 The pH was high so that was adjusted but with the ppm being at 185 to 200 range I chose not to buy a filter and just dechlorinated the water only. I was tired of lugging 5 gallon water bottles in and out of the basement😃 That is a difference from all other grows…..silly for not catching this by week 4! So…….back to lugging bottles in and out of the basement😂😂😂 She really started to take shape around weeks 7 and 8 and formed a beautiful little cannabis plant and grew to 20” tall and roughly 18” wide. Main focus with her was to just perform LST on side branches and let the top go…….I wanted to just let her go and see what would happen to her main cola for size and height……plus I don’t do that…….I always bend over the tops on my grows so this was a little different for myself. She grew very nice leaves and a lot of them. This pheno had a lot of leaves to her and that is fine……its not really my first choice in characteristics of a plant though..…..so much more work at trim time……Green Poison XL Auto, SWS71, was a dream to trim👍 as a comparison!! She didn’t fox tail very much she firmed up her buds towards the end. The resin production was a little slower coming out in her but by week 7/8 she was getting pretty impressive😋😋😋 White and sticky!! She smelt of woods with citrus notes…..works for me👌 There were no issues at all retaliated to pests or bugs……I threw in a couple sticky traps but there weren’t any to catch. She handled the high humidity in this run great and there were no signs of any powdery mildew👍👍👍 She is a very stable strain from Sweet Seeds! Day 63 was last feeding, flushed for almost two weeks. Rezin and Liquid Weight still given for one of the weeks but the last week was plane water. In hind-site I think I should have hit her with some Flawless Finish to help get that last bit out of her. She did feed on most of her nutrients but some of the lower leaves were still more green that I would have liked. She was cut down on day 77…..11 weeks is about what I suspect looking at her in week 7…….this was roughly 8 weeks flower time……makes sense😃 She grew for 75 days and then I decided what the heck…….she needs a hole in her stem to stress her out😃 I didn’t try breaking a branch but rather drilled a hold into the base of her stem……something new to try out. I think I will try more holes next time….max 3 I think……then I want to run a couple with cracking their stems and see if there is a difference👍 I feel more in control of a drill and its accuracy vs bending branches and they snap where they want to…….anyway it was worth a try!!!! Worst case, it made it easy to hang her as a whole plant to dry😃 This girl battled pH issues all her life and as a result the buds were not where I would have liked them. There were not fluffy…..but here were not as hard as I would like for rolling joints, so the whole girl went to concentrates She dried for 7 day as a whole plant, 2 days more in smaller branches, then 1 day curing in jars before dry ice sift. She yielded 74g of dry cured buds, 2.65 ounces. Not bad…..I don’t think her buds would have gotten a lot bigger but they certainly would have had more weight if they firmed up…..grower issue, not genetics. So…..lets make some rosin from this girl🤩 The yields on this and making her hash a perfect colour are not what this process is about…..let’s get that out of the way right away……this is about another way to enjoy and consume my cannabis for my own relaxation and medicinal needs. Taking pictures of rosin is always a challenge…..it is always dark in the pictures unless you are using a nice DSLR to let more light in. Rather than making bubble hash with water, I just used the bags to make a dry ice kief from the buds. Unfortunately I couldn’t get a block of dry ice and had to use these cubes…….don’t like these as much because there are too many surfaces beating your green plant material and your kief goes green before long when shaking. Could have done it with out ice all together…..nicer hash but lots left on the plant afterwards that way so yield is low. Used two bags in this extraction, the 220 as the bag for edibles and the 120 as the bag for pressing rosin to smoke…..dry ice hash rosin!! The yield on this from the 74g of bud was 22.4g kief. 220 bag was 12.6g and the 120 bag was 9.8g. Not great I guess but I didn’t want to keep going for 4 and 5 minutes with the bags…..these were roughly 2 minutes with the 220 being 3 minutes on the high side. You can certainly see that the 120 product is more golden in colour than the 220 but since I didn’t crazy, the 220 is still a very nice colour. Last step on this journey was then to take the kief and make our rosin. I pressed product using 37um bags with the temp set at 160 degrees. All were done the same for the most part……roughly 4 gram presses, the same temperature, and the time. The first presses were 90 to 120 seconds. If a second press was done on the pouch, then it was at the same temp but for only 40 to 50 seconds. The yield on this was just shy of 7 grams…….6.77g…..roughly 30% yield from Kief???,…..roughly 9.2% from flower???…….would have likely done better right from flower😂 😂 😂 it was fun, regardless of the yield😃 Tasty rosin!!!! Can’t beat rosin for getting the true tastes of the plants. These numbers are absolutely due to my abilities with extraction.......sure don’t judge the genetics based on my returns......she is a frosty plant and will give great returns!!!👍👍 Several pictures show that, I hope!! So that will wrap up this diary for Sweet Seeds Killer Kush Auto, SWS56. Certainly give this girl some consideration if you like OG Kush and also have space concerns in your grow. She is beautiful frosty little girl with a punch. Certainly get the usual woody and citrus notes from her rosin and she has a lasting high. She helps to get get you going and willing to finally start cleaning that corner of the room you have been avoiding…….watch out though…..distractions😃……next thing you know 40 minutes go by and you are staring at a box of DVD’s wondering what happened to CD’s…….cassette tapes (the art of the “mix tape”), 8 tracks, vinyl……ALBUM COVER ART Baby!!!!!! Then its either back for another rip, or get your crap done because the next rip leads into even less work getting done😃😃 Great job as usual @Sweet_Seeds !!! Looking forward to the next one……Cream 47 photoperiod……actually, already done germination and a new diary coming👍👍…..compare a 3 gal pot to a 5 gal pot, or a fabric vs air pot, and see what my yield differences are?? Thanks for the read and greatly appreciate the comments Growmies!!!!! Love spending time on a forum for growers to help fellow growers. Much grower love and thanks again for your time, opinions, and suggestions🙏🙏🙏 Cheers!!
Likes
11
Share
Operation Flower of the Jungle is a Go! Second week of flower and these ladies are stretching and blooming! A part from the stretch and flowers coming out, there hasn't been much change. Which said like that seems like it's nothing but there has been a huge flower production in the past week. Were gonna have some nice jungle nuggets. Upped the nutrients 1ml/L
Likes
2
Share
Cosecha finalizada, fue una de las mejores plantas que e tenido, su aroma fuerte a menta y pegamento invadió toda mi casa, ni hablar del tamaño mounstruoso
Likes
Comments
Share
@runtzpwn
Follow
Feels like it snowed on it over the last week, full of cristals. I think it needs about one more week and then it's ready for harvest.
Likes
16
Share
@Mohro49
Follow
Week 5 and its getting frosty❄️✌️
Likes
6
Share
June25:🤦‍♂️🏿🤦‍♂️🏿 June27: the lizards have attacked again... for this... today we are going to raise the girls and place a mesh June28: I have no idea how they did it... but they got in again!
Likes
6
Share
The Final Four are still stretching as you can see in the Time lapse movie. They are really eating; I just feed them on the 7th and again on the 10 they are responding well to the increased PPM and reduced PH 1500 and 5.9 with no real signs of Nutrient burn. I added the Pro A and B this time as they will need some N in the flowering stage the P & K are getting the boost from the liquid Cool Bloom 0-10-10 I and am still feeding CAL and MAG in every watering. I think tonight when the lights come on, I will rearrange the Scrog with the four remaining plants, as three of them are tucked in the corner from the time I had my California 6 in the tent. For me that is plenty of personal smoke plus Larf and trim hash. happy growing Gromies.💪
Likes
6
Share
Processing
Likes
1
Share
everything changed on week 4 grow tent and cob led came to show how a good light is important. from now til last 2 weeks, only indoor growing goodbye CFL's, you worked well. + LST and ferts (2ml + 0.25) Defoliation started Removed branches from 1st node