all nutrients are in ger section. so i would say this should be the last few days befor going into flower phase. cant wait to see the coulour change on the leaves.

*clears throat* NOOB SPEAKING! So I fudged up and just realized that I’ve been using the kool bloom POWDER way too early. Never realized the difference between the liquid and powder. She seems to be doing good and fattening up fine. I’ve never seen a issues from using it too early. Smell fruity, spicy, and sweet.... maybe from the kool bloom being used too lol early I dunno. From what I read it may hurt the yield but with two week left in flower only time will tell 😞 thankfully I know it’s strong so only ever used very small amounts. Thoughts???

Flipped today currently in the Floral Transition stage. Watered with a Cytokinin dominant SST. Top dressed some bloom fertilizer with ewc and biodiverse compost. Cut down all the cover crop.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Hey everyone 😃. Every day is a joy when I take the lid down and see how the lady comes to life 😊. She is developing great :-) It only had to be poured once with 300 ml because it is under the hood with a very high humidity :-). The hood was sprayed every day. I think I'll start training this week :-). Otherwise, as always, the humidifier was refilled and the entire tent was cleaned. I wish you a lot of fun with the update :-). Stay healthy 🙏🏻 and let it grow 👍. You can buy this Strain at : https://www.exoticseed.eu/ Type: Quick Sherbet ☝️🏼 Genetics: 75% Indica / 25% Sativa Sunset Sherbet X Black Lemon 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Leaf scaring getting worse but seems to have stopped progressing. Buds look amazing and can't complain about tricome production.

Buds fattening up. Looking to be at least a 4-7 ounce dry weight harvest .

Neues Licht hinzugefügt. Uv und Deep red von Mars. Gesamt aktuell 500 Watt. Uv Max 90 min am Tag .

20cm growth this week. Flowers are forming and I can see purple on them 😍 The bad news this week is I was bending her lower branches.. trying to spread her out a bit. I've managed to snap both of them! She has been repaired best I can do, so will monitor it over next day or so to see how effective the fix is. I don't hold out much hope for one branch.. Looks like it's wilting already 😞

This week I did seedling feeding chart 1st feeding growing nicely right now happy on the stacks that are growing. Will transplant next week in 5 gallon pot for her final resting place.

10/21 Removed a few leaves. Drying up nicely from flush. The smell is amazing!!! A hint of sweet fruti with a lot of armpit sweat. Will update Kosher tomorrow 10-22 The burn has ended. 🤣 They both doing so well and gettin chunky! .

Coming to end of week 3 day 25 flowering. All looking pretty good. Couple that are more advanced than others but sure the others will get there. Humidity a bit high. Do have a big ass freestanding a/c dehumidifier just need to concuct a way of making it usable.

Over all was an amazing grow, super sticky dense nugs with smell of berries, highly recommended for everyone!!

previously, all my seedlings have almost stretched. this time i put the cm led lights 2 inches away from the seedling, and it seems to have induced self-fimming and divided into 5 or more branches. despite looking at many timelapse videos of germinating seedlings, i have not seen behavior similar to that of my little girl. besides that, it was a pretty uneventful week. i mixed and changed nutrients once testing the doser - still feeding at 1ec, pH 5.9. I had one leak, i think the hpa nozzle was shooting water from the side as i was not sitting correctly on the grommet - i must figure a way around this. i did not build the garden master controller yet with high-pressure sensors, hopefully soon.

FastBerry (FastBuds) 14 days from sprout. Started a light nutrient feed this week. About quarter strength of what is recommended. Also added neem oil to soil drench as I noticed a couple of gnats in the air and don't want that to become an issue.

COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Dear diary, Week 7 has brought us closer to flower. Despite some variations in their development, they continue to progress steadily. 🍀🍀🍀🍀🍀🍀🍀🍀🍀🍀 ⏰ Day 46: Provided a feeding session with a nutrient strength of 1.64ms and a pH level of 5.7. After tying down the tops yesterday, the plants exhibited upward growth again. ⏰ Day 47: During the evening feeding session, I administered a feeding with a nutrient strength of 1.67ms and adjusted the pH to 5.6. This also is the day that marks the final topping session, bringing the total number of tops to 16 for each plant. The plants have responded well to the previous training, and I'm eager to observe their continued growth with the mainlining technique. ⏰ Day 48: I provided the plants with a feeding containing a nutrient strength of 1.67ms and a pH level of 5.7. ⏰ Day 49: During the evening feeding session, I maintained a nutrient strength of 1.67ms and adjusted the pH to 5.6. Additionally, I removed another set of fan leaves to optimize light distribution among the tops. ⏰ Day 50: The plants received a feeding with a nutrient solution at a strength of 1.64ms and a pH level of 5.8 ⏰ Day 51: During the evening feeding session I provided the plants with a nutrient solution at a strength of 1.64ms and adjusted the pH to 5.8. ⏰ Day 52: Administered a feeding with a nutrient solution at a strength of 1.64ms and adjusted the pH to 5.8. To ensure optimal light exposure for all the tops, I removed the last set of old fan leaves and did some more low-stress training on the other 2 plants in the tent to align their heights more closely with the WCs.

think i overfeed a little bit the tips of the leaves show signs of burning so next will be 2ml bloom and 1 ml pk booster u can see the little burned tips of the leaf in the pictures. Guess it won't affect the growth of the buds. If u have any advice feel free to say :) Cheers Spekkoek