Likes
Comments
Share
Finally!!!! It’s week 10!!! These should all be finishing up within the next week or so! So excited to get these harvested soon 😍 I started the flushing process on Plant C and will start flushing the other two this week. Let me know what you think! How many days do you think until harvest time??!
Likes
13
Share
@Caertner
Follow
Epische Aufnahmen einer gemeinen Honigbiene beim Sammeln von Canna Honig. Die Aufnahmen konnten gemacht werden, weil die Biene wiederholt zurückkam, um noch mehr zu sammeln... ? Ich glaube gerade nicht was ich sehe...
Likes
18
Share
Bud sites are producing black/purple spot in leaves. Bud growth is producing as the days go by. Really excited with this being my first grow Nitrogen boost really helped with the deficiencies. Plants are starting to look really heathy... Prunes lower colas that weren't stretching past the canopy and receiving energy so more energy can be used towards the top buds
Processing
Likes
19
Share
Seems I told a lie last week, I'm late one day and I've done videos again cos again 🤥 Its been a good week for bud production regardless of a hiccup this week which shows as cal/mag and nitrogen deficiencies throughout each plant🤒 My ph pen malfunctioned and I ended up feeding them all 4.5 and didn't notice till the leaves told me 🍂 The ph pen has been replaced, amendments made to buffer the root zone and fingers are crossed 💉🤞 Super stinky grow this, going to replace my carbon filter before starting a new one because I caught wiffs of them when I entered my home today. If the flavours match the smells in this tent I'm in for a treat come smoke time.👃⛽🍋🍇 Its that magic time in the tent now where each girls really showing their own characteristics, both the purple punches and the zkittlez are different phenos to their siblings so I'm excited to see what they finish up like🏁 So far mostly good 👍 Thanks for reading 📖 One Love💚 Fire Farmer🔥👨‍🌾
Likes
67
Share
@Hashy
Follow
Grow diary 11 stage 8. Day 71 to 80 This girl has developed quicker then the other strains and because of the o.g taking up so much space I decided to put up my older ds60 tent with my old mars hydro purple light. After 3 days my old extractor fan broke and she stunk the house out. I pulled her out the other tent on day 75 and gave her ripen for 5 days before moving onto flawless finish. When I'm happy she flushed its harvest. Not expecting much, maybe 1/2 oz, its hard to guess, she is tiny but solid.
Likes
2
Share
No joke, the small plant last week blew up. It grew almost 10 inches in a single week! I had to put the Vulcan pinch on this skinny beast! I know it’s taboo to let train a plant in flower but she was forcing my light up.
Likes
1
Share
My first Grow with random cuttings. I found growdiaries after the Haverest.
Likes
16
Share
@Mohro49
Follow
Week 5 and its getting frosty❄️✌️
Likes
Comments
Share
Day 29, giving structure to ghe little baby, trying to multiply branches and giving some attention to the topped one. Day 30 fertisilisation today. Next time just water. LST is still in the middle Day 32 31/10 dinner at 100% now and pushing hard with grow, just watering without fertilisation this time and lamp higher for 2 cm. Stretching a little bit before passi into flow, next 7/8 days of veg Let’s see what’s happen
Likes
60
Share
Día 22: 🔹Riego según la tabla de nutrientes BioBizz con una EC de 900 y un pH de 6.2. 🔹Pulverización con Rootbastic a 0.15ml/l. ✳️Nota: creo que finalmente el Sabado las pasaré a floración, 12/12.Leevarán ahora entre 3/4 semanas con unos 5 días de diferencia ( hay cañamones que puse más tarde). Día 23: 🔹Pulverización con Rootbastic a 0,1ml/l 🔹Tengo que volver a regar, aplique poca agua ( 250ml x maceta) y le aplico 370ml x maceta ya que no dispongo de más agua sin cloro. La próxima vez las regare con 1/2 litro a cada una . Riego según lo tabla Biobizz con una EC baja 900-1000ppm
Likes
8
Share
Likes
19
Share
Not a lot happening, just filling out rectangles in the scrog net. Need smaller rectangles, these are 15cm...
Likes
37
Share
@PapaNugs
Follow
This was a quiet week. The girls were recovering from their topping but were also flipping into flower. They have been getting water every two days and that seems to be an issue so I bought an auto watering drip system to install next week. The orange sherbet is going well. She continues to develop. Slower than the cookies and strawberry banana but better than the purple lemonade. Dimmed to 60% Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/
Likes
38
Share
For LIQUIDS & NUTES ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.
Likes
24
Share
Flowers started showing up this week. Flowers forming on nodes. Did a flush this week for 3 days straight with RO water and CalMag+ to 250ppm and 5.8PH.
Likes
96
Share
@DevilsBud
Follow
New week of flowering for CBD SPLIFF BERRY Doing nicely @spliffseeds deliver again a great strain 👌🏻 did Les LST to this one compare to Afghani Gold but made sure the lower stuff gone also make sure less popcorn can pop up. I am not sure if ever smoke a 50/50 THC/CBD strain but will see 👀 Happy growings Growmies see you next week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
28
Share
@Verbalist
Follow
#30.8.2021 - 6th week of flowering in progress ~ it still needs another two weeks to finish. ~ 6th week - Last nutrient ramp up ~ ~ 7th week - *COMMING* ~ ~ 8th week - *HOPEFULLY HARVEST* ~ The foliage slowly finishing their lifespan. Leave tips are slightly burnt, looks like PK booster doing the job. 🥦 #1.9.2021 - Gave them first good flush to get rid of the excess Nitrogen and other unecessary stuff #2.9.2021 - Last week feed: Topmax, PK booster and sedweed/kelp extract — First test nugs were cut! 🤩🥦 #4.9.2021 - End of the 10th week — Flowering day: 45 (1-1.5 weeks more till harvest)
Likes
14
Share
As my previous experience, I decided to use 10L pots, which is the best ratio I had last year regarding quantity/soil. First week only with plain water, no Ph regulation