everything turned out very well :) and it's only with 50w and with 40x40cm space :) It was an interesting journey with her, a slightly different cultivation and old mistakes were discovered :) the flowers are not dense, but they are really very, very sticky :) I'm happy:)

I'm doing a lot of leaf tucking every other day, I started using Bloom nutes, and doing LST here and there.

Mini group cute 😍 I like art, bonsai cannabis :) Honestly I had some issues I had to change the soil no choice but all good now they started coming. Cute little bonsai girls. Fetrilization continues the same way on Monday, Wednesday and on Saturday with the mix above :)

Week 4

Treated the girls to a new grow light Friday, the ACInfinity EVO4. Set at 18" and 60% to start. So far so good, but OC looked a little droopy Saturday morning. Raised light to about 19" while I had my coffee. Fed them both 3 litres of water with 2ml per litre of Remo veg schedule Friday evening and topped OC to help keep canopy even. For the second time I had little to no runoff, even after increasing the water by 1 litre. More next time I guess. My original plan was to flip to 12-12 when the lights come on tonight, but I think I'll give them a few days under this new light to get their groove on and raise the power of the light by 10 each day and drop it a little closer to the 18 " AC Infinity recommends until I'm at 100% and 18" then prune and flip. I think I've got room to stretch. Plants are at 11-12" tall from the Promix, so I can definitely let them veg for another week. Raised the light back to 24 inches after my coffee, still at 60%. Saturday morning I fed about a litre of straight RO water to both and Saturday night I cleaned up a dozen or so fan leaves that were shading bud sites. Sunday OC still looks a little droopy, but much better. Sunday morning lowered light to 22" and powered at 70% with a 1 hour sunset sunrise. Fed them Monday night until runoff and took 6 litres at 2ml/l about a litre and a half came back out. Next time I'll give them 5 litres. Been trying to dial in this new light, plus I've went down the light meter rabbit hole on YouTube.....so according to Photone everything seems to be in check with the light at 70% at 24". AC infinity must have a more light tolerant stain in their test labs because full power at 18" would have my girls chicken fried in no time. Tuesday morning they both looked great, temps and humidity and light and nutes all seem to be pulling in the same direction. Plants are about 12&13 inches tall Likely flip them Thursday evening 😁😨😰 Wednesday morning gave them a small haircut of some leaves blocking budsites, and a bit of plant yoga bendiness and gentle restraints to let the light into the heart of the plants. So on page to flip tomorrow evening. Light is averaging 700 micromoles per second.

TEST RUN OF THE ELUFAH UAP-1500 My lemon cherry Runtz is starting to get some decent structure and finally recover. I don’t like how stretchy the nodes are on this pheno also I do t like the thin leaves. I think I probably got a plain Jane pheno. The plant really stinks though. That’s a plus. I’m sure when I flip to flower it will do well.

Clones are coming around they was shocked being up in Maine we had a light out for 3 days got too 40° in the cloner etcetc sooo trying to get them to root just gave them some clonex ✌️

5.6oz dry weight wow! First grow & in soil?? This strain is amazing! Anyone that grows this will not be disappointed! She smells and tastes and smokes absolutely amazing! So fruity! She is my firm favourite strain now! Beautiful! Really recommend her so much!

This week was very good, growed good. I topped her and gave an lst. Turned down the light to 20 hours. Hope its worth. Have a nice week✌️✌️

yeah baby nearly there - just water.... Took some iPhone macros

The missing star Due to the weight and growth that is different from other numbers But she still has a highlight that is covered with snow Make us all want to have a relationship with this little girl once🍬🍒🍭❄️ This After harvest 14 Day Living soil🥦🥦 Notill💚💚💚

New week starts! 🌞05.12.2022 This day began with smell rising. I think flowering starts. There's a few pestels in every knot (but not on a top). Watered my girls with nutrients without 'Roots' stimulator. I should stop to give it a long time ago, I hope it gave no harm. Soon when the odour will become too intensive I'll turn my filters on. It will be very noizy, that's why I want to do this as late as possible. 🌞06.12.2022 'SeaWeed' spraying today. I changed distance to lamps. Now it's 40sm. Temperature didn't rise, so it's OK. Upd: I made some LST on evening. It's a last training for them, I guess. 🌞07.12.2022 Pre-flowering stage started! I turned on third 100W lamp. Now it's 300W total. Fed my girls with GHE pre-flowering nutrients complect. Sprayed with 'SeaWeed', as usual. 🌞08.12.2022 Today I came home from my job to see both girls increased in their high dramatically, +5cm in 24hrs. Maybe it's because of feeding, maybe lights, maybe auto flowers act like this, I don't know. But I saw larger distance between knots there. I was forced to do one more LST procedure (result is on photo). Also, I sprayed my 'BPPa's' with 'SeaWeed' (as usual) and moved pots closer to each other to place them in a gaps between three lamps of mine. I'll feed them tomorrow. 🌞09.12.2022 Today I noticed brown tips on the my babies leaves. #1 has alot of it and #2 kinda few. I considered to water them with 'GHE Clean' solution one time, next time I'll give them half of a nutrients dose. Smell gets stronger. Tomorrow I'll turn my main ventilator with two carbon filters I have from the previous grow. 🌞10.12.2022 Yesterday I flushed my plants with 'GHE Cleen' solution 2ml/l. Today I do nothing. Tomorrow I'll give them 75% from previous feed formula. 🌞11.12.2022 I putted small amount of sulfur in an upper layer of substrate, ~10g/m². Watered my plants with 75% from 'pre flowering' GHE recommendation. Sprayed leaves with 'SeaWeed'. Week ends.

Big purpz, in the video - its only the purple plant thatrs a purple punch, and god damn it has purple trichomes !!

Let's see how it goes. I raised up the water so it is now 150ml 2x per plant so 300 per plant per day. The same with fertilization and the same days remain. I keep 14 hours darkness and 10 hours light schedule for Purple Punch obviously I take out from the tent and put separately. I can't wait to harvest the Gelato Cookie D'ohpe so I can use the tent for the Purple Punch. I give 18 hours light on so 12 hours on 4 hours off and 6 hours on 2 hours off. Basically, it was the only solution because I put the Purple Punch in at 23:00 o clock and take out at 9 am. So the light on from 23:00 to 11 am and then 15:00-21:00 and off from 21:00 to 23:00. It was the only good way based on my timeline working hours and school. I also see the first signs of flowering after 7 days of light schedule change of the Purple Punch. Hope it goes well. They have a totally different smell, both strong, but the Gelato Cookie D'ohpe is like sweet and aromatic, and also like a muck heap 🤐😅👻The Purple Punch has strong smell but not sweet more like citrus. Saturday: I always had some yellow fan leaves but now it is getting more on the Gelato Cookie D'ohpe. Hopefully, it causes the flowering stage because the plant wants to use the energy for buds making and takes out of the leaves, so it is a natural process. I read that it means the plant is on the halfway of the flower. Hope the best. Tuesday: Purple Punch does well flowering, and the Gelato Cookie D'ohpe I think one more week so I will start flushing from tomorrow. I have checked the trichomes, they are cloudy, milky and the pistils started getting brown also so soon it will be done. The fan leaves also getting yellow as it can be seen so I think the next is the final week, if not then no more than 2 weeks and it is done. I can't really wait... End of this week Gelato Cookie D'ohpe is 70cm and the Purple Punch is 40 cm.

Marshydro supported grow Spliff Seeds CBD Spliff Berry/Afghani Gold Anesia Seeds Hyper Glue/IMPERIUM X/Captain Future/Blackberry Moonrocks New week in marshydro set-up The week 5/4 plants doing great I added a extra strain in the mix the Seeds Mafia Headshot sadly only 1 survived better then nothing . I will probably start flowering phase next week depending how they grow Probably come flowering time Black berry moonrock imperium X and headshot will be put in the 100X100X180 with the TS-1000 so they can veg some more 21/10/21 Couple of days ago i catch some ladybugs to put with my plants but didn't see them but there finally reach the plants woehoe Decided to order some 11L pots to transfer them in so before flowering i probably transfer them so roots can grow some more also gone try Mycorrhiza Mix with transfer A update of using the new marshydro set-up The FC-4800 is a absolute beauty of a beast the change from growing under a marshydro TS-1000 to a FC-4800 is night and day nothing bad about the TS-1000 it deliver me a great first run with 4 plants absolutely amazing lamp to start with no doubt . But since i am growing 9 now and soon maybe 12 the FC-4800 will for fill that task with no problem what so ever 💪🏻👌🏻 Marshydro gets your bud's frosty and reaching for the ✨ Also the new 120X120X200 tent Is of class of it's own bin growing in a 100x100x180 tent and has worked fine and will stil be used for plants that are en early grow stages together with the TS-1000 . The 120x120x200 makes everything much easier for me and my back 🤣 the 2 side holes now where I can reach the back for my grow 🤘🏻🤘🏻 Also the space i have now is great for the amount of plants i will be growing i am loving it visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter