The Grow Awards 2026 🏆
Likes
Comments
Share
@GroloCup
Follow
Finally, a seat at the table! I created this beast by crossing Sherbinski's Larry Lemon OG with pollen from a reversed Mephisto 3 Bears OG and created this tried and true, but never showcased powerhouse. She was originally called 3 Lar OG, but after my first run with her, the name OG Triple OG stuck, apparently because she's so gangster!
Likes
27
Share
Day 22: Hi all , hope we are all well. The Gluberry male has been banished now and wont be making another sneak attack ever again !. The remaining Glueberry ( #2) is now able to have her 1st gym session ( no social distancing or masks needed!). She has been bent over from her 4th node( no sniggering at the back !) so that her 5th(main) takes a horizontal path to the pots edges. The other growth below should form up similar to a quadline . Inwill allow it to go vertical when the flowering begins which should create 5 mains to develop into long chunky colas. Being an attempt to find my own best use of autos in this environment I use , is proving to be fun so far. Inhave other strains ( in my diaries here) that are being trained using this and other methods to again , see 1st hand what works for me. The Mimosa Lemon is doing really well too. she had her 1st session a few days ago and is responding perfectly so far. Both of these ladies are looking really healthy and green so far . I have not done a total soak of the medium yet and have been watering just outside of the plants leaf footprint. This is to encourage the rootball to set itself up for the flowering cycle and an important foundation for their overall possible yield. As above ,so below logic. lets see how they progress by the next update. be well and safe. welcome to the age of Aquarius. The feminine cycles turn !.
Likes
23
Share
Just another update for you guy's, also added abit extra on the video...... If it plays. Hope everyone is having a good week. Happy Growing & any questions just ask. 👍🏾🌱🌴💯😎
Likes
4
Share
Week 5 veg - clones and Week 3 - Blueberry Cupcake (Humboldt Seed Co.) and French Macaron (TH Seeds) from seed. G-41, Frosty Gelato, and Frozay Gas topped with 2 clones each taken from cuttings to propagate placed in 2x2 clone/seedling tent with low LED lighting. Temps in low 80F w/60% ROH. Clone cuttings covered with sandwich bags used as humidity domes. After taking cuttings transferred G-41, Frosty Gelato, and Frozay Gas to 3x3x6 AC Infinity tent under Mars-Hydro FC-E3000 set at 50 percent power (PPFD range for veg). Black Cherry Gas clone, Blueberry Cupcake, and French Macaron from seed remain in 2x4x5 AC Infinity under Spider Farmer SF-2000 with dimmer set at 50 percent power (PPFD range for veg). Continued twice weekly IPM foliar treatment with Organishield as well as watering soil program (SP).
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
31
Share
Gorilla 🦍 cookies bellissima plant una delle 2 gorilla si è allungata più dell'altra.cmq continuano a dare il meglio di sé.
Processing
Likes
2
Share
I like how everything is going so far! Very healthy
Processing
Likes
3
Share
15/05/2020 Se realizan los transplantes de los esquejes a macetas de tela de 11 litros (quedaran 2 por transplantaren la proxima semana (zkittlez i Ozk)) Se mezcla el Supersoil anteriormente activado con el sustrato a utilizar Se añade azos y mykos en el cepellon y en el agujero de la tierra donde ira el esqueje Se riegan con mammoth y bud candy Se sacan al exterior sin que les de el sol directo durante unos dias hasta que cojan un poco de fuerza
Likes
2
Share
@EtnoGrow
Follow
el segundo corte luego 15 dias o dos semanas, ya mas maduro punto mixto temprano, cogollos ambar y blancos nublados, predominantemente blancos . se ve con mejor pinta que el primer corte
Likes
8
Share
@Kirsten
Follow
26.12.24: I have noticed light stress on my plants. I had moved the lights further away and increased the light intensity to 70%. Unfortunately that created some issues. Namely severe palour of the leaves. To try and rectify the situation, I've dimmed the lights to about 30%, staying at the same distance, about 30 inches away. I measured the par levels, after I did this. They should a reading of anywhere between 40 and 150, at the canopy of the plants. They are all different sizes. This seems to have improved the colouring on all plants. After this evenings watering, I will monitor recovery and increase lighting intensity again slowly. I am also using the light cycle of 21/3, so the plants have many hours more light to absorb, than for example 12/12 or 18/6. I am pleased with the progress, considering all of my mistakes! 29.12.24: So I finally gave LST a shot, it's probably a bit too late, however I really want to get the most of the triploid pheno, and I went a little crazy and LST'd all plants except 2, as they're too small. I did that late last night, this afternoon I was amazed to see the plants turn their leaves back to the light source. I'm glad I overcame my fear of trying it. I'm very excited to see them adapt and progress! 😁 there are videos above with before and after of my LST process. Thanks for checking out my diary 🍃 ✌️
Likes
4
Share
@UkLgrows
Follow
No earlier pictures as only just found this site first ever grow
Likes
3
Share
@syoung
Follow
So i started my nutrient feed for the 15 plants, while plant 16 just sticks to plain water or i might just give her some ph water this week. Also foliar sprayed the girls and they seem to be loving it
Likes
1
Share
@drozdzis
Follow
Plants look strong and healthy. Average temperature and humidity, no major fluctuations. Additives: A small dose of Voodoo Juice, 1/4 dose of Cal-Mag.
Likes
10
Share
Not too much on the scale but the terps and the intensity of the smoke is great. Two very distinct phenos that makes it so much interesting to understand the differences between.
Likes
2
Share
Estas plantas se desarrollaron de esquejes. Hay dos plantas en cada balde de 10L. L a técnica que utilizo es ninguna técnica, solo espero a que se desarrollen y maduren. Lo único que hago es controlar el ph y cambiar la solución nutritiva cada semana. Todos los días verifico que el ph esté cerca de 6. A veces puede ser 5.8 o 6.5 de ph y eso no es un problema. Lo único que se me está complicando es la extracción del aire. No tengo dudas que en algún momento lo soluciones adquiriendo nuevos productos. El sistema que utilizo es la hidroponía. Se me hace más cómodo el sistema. No me gusta mover o utilizar tierra ya que es muy sucio y se mueve mucho volumen.
Likes
15
Share
Day 56! - 14/01/21 Girls are pretty happy. The 2 runt phenos are annoying me now theyre the stretchiest in the tent, taking up heaps of room and still barely getting any light.. One of the girls has a calcium issue, which is odd, but im hoping to combat it before its too late. Definitely going to have to do a staged harvest, not what I wanted but hey, gotta do what you gotta do. Thanks for stopping by.
Likes
47
Share
Bonjour à tous les padawans et maîtres jedis Super plante ou plutôt jolie petit arbre avec de branches bien chargées de grosses têtes remplis de trichomes Un vrai plaisir à cultiver très belle et résistante
Likes
41
Share
_Eyeing up trichomes clusters and buds as they ripen to determine a harvest day -Plant still drinking heavy.. -Bud flops, any motion and the branches are ready to lay. Heavy buds -Flipping Slurricane #7 -Day 69 harvest on BCS seed
Likes
10
Share
Harvest day 66 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 18-20 degrees and 55-62% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Let's get to the plant 💚 Very nice phenotype with an extremely good smell. Growth was normal after the initiation of flowering. Looks beautiful with its jagged leaves 😃. As always, the Green House fertilizer did a very good job and I can only recommend everyone to try it out🚀 Have fun and stay healthy 💚🙏🏻