Likes
Comments
Share
@Grey_Wolf
Follow
ACE Seeds Malawi x Northern Lights Auto 8th March 2020 Welcome Back it's now Day 32 since Germination and she is Moving into Full stretch and early flowering . Hopefully I got enough LST training done so that I can maximise my harvest potential. Ive got her back out in the sun today because the weather is ideal. I reckon a bit of natural sunlight and UV couldn't hurt her and could even be a very good thing actually. Whilst she's outdoors I'll feed her with some Fulvic , Humic and amino acids plus Mycorrhizae and one last mix of Grow Nutes. This should be enough to see her thru the stretch phase hopefully and then she'll start getting more Potassium and Phosphorus for Bud production. That's about it for This week so thankyou for Reading this update see you next week 👍
Likes
3
Share
@Cannabuss
Follow
Took off excess lower bud sites and removed fan leaves. The plant is looking fantastic and plumping up nicely. Tops are already looking chunky and the light penetration is much better now after defoliating some more. I have turned the light up to 50% and have raised it to its final height. Luckily the stretching wasn’t too bad and didn’t push the light up too much.
Likes
8
Share
Pues la catastrofe pasó. Usé una bomba de descarga (un spray de esos que apretad y tira todo) que en teoria es compatible con las plantas dentro.... Se lío, ya se ve en las fotos y video que muuuuuchas hojas han reaccionado, fitotoxicidad y capúm. En fin, el cultivo lo voy a terminar, se salva mucha cosecha, en principio, pero eso. Fuera de aquello, la planta sigue tirando muucha resina, engordando el cogollo y oliendo muuuuy fuerte a gas y frutas.
Likes
92
Share
Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
Comments
Share
@BruWeed
Follow
11/10 - empezo su quinta semana de floración. Se encuentra perfecta, su olor es muy fuerte y esta muy resinosa. No tuve ningún problema hasta el momento. Su evolución fue muy rapida en comparación a otras geneticas que cultive. Aprox le faltaría un mes mas para ya poder podarla, los pistillos se encientran muy blancos por el momento.
Likes
9
Share
Few weeks to go it’s looks great cola development noce sweet piney mix of smells triche are beautiful
Likes
101
Share
. So were should i start lol they all growing and streaching as they should. I tested my run outs ( since they all drink and eat diferent i've been testing all of them😅) and some are coming out a bit too hy for my taste (EC at 2,86 in one of them) so i'm going to start and do alternade feedings. one time with nutrients onother just water and test again to see if the numbers are more of my taste lol , PH is coming out at 6.1, that one i liked 😄 Apart from that yesterday i gave them a good air cut to help the ligth pass and to take out everithing i thout wasent nessesaire. they loved lol I intruduce a bag of CO2boost, the boost buddy bag, this will help incrissing what ever CO2 numbers i have in there ( need to by a CO2 monitor ) Girls: 1-BlueBerry 2-Alaskan Purple 3-Poyote Gorilla 4-Hindu Kush 5-Whitw Mango 6-Super Glue 7-Badazz Cookies 8-S.A.D. tent -8x8 / 2.4x2.4 but i'm only using 1/2 so 4x4 / 1.2x1.2 Led - Lumatek 465w Compact Pro at 100% All i Grow is medicine for myself, Stay safe, stay tuned and B Happy Peace out D
Likes
16
Share
Day 98: I have not been active for the last 25 days, and only watered the plants, because of family emergency. I think it is time to harvest :) Tomorrow I will start cutting down the most dark buds, and slowly cut it all in the next couple of weeks
Likes
61
Share
@WhiteEdge
Follow
30.04.2024 Continue into week 9 Clean nutrient tank for the last time...This is last week of flowering for almost all girls. Electrical Conductivity (EC): 0.8 for this week.. Purple Lemonade: First pheno is insane! Shape, size ,color, bud hardness, appearance, frostiness' all attributes to become photo model! Beautiful and high odor in the room! Lighting Parameters: PAR Map: Maximum PPFD is 800, minimum PPFD is 550. VPD: Ranges from -0.1-1.1 Daytime Temperature (DT): 23-24°C. Nighttime Temperature (NT): 19-20°C. Leaf Temperature: 21-22°C. Light Distance: 45-55 cm from the plants. CO2 Levels: 700+ ppm. HLG Scorpion Diablo: Set at 60%, positioned at a 45-55 cm distance. Girls drink less water, so for this week and till the end of flowering new misting timing's Daytime: ON for 50 seconds, followed by 30 minutes OFF. Nighttime: OFF for 50 seconds, followed by 45 minutes OFF. Nutrient Tank (NT): pH: Maintained between 5.80 and 6.00. Stable PH, small drifting up and downs EC: 0.87 Temperature: 19-21°C
Likes
133
Share
She started very healthy and grew very quickly, we topped her once at the 3nd node (after 5 nodes), tied the main branches to the side allowing the bottom growth to catch up... we then toped each new top 1 time (after 2 nodes on the new growth), our goal is to creates 12 main top branches...we stripped the bottom 1/2 of the plant bare for now :)
Likes
4
Share
Prima settimana di fioritura.spero di riuscire fino alla fine senza intoppi
Likes
21
Share
Week 10 is all done. This plant is by far the most beautiful cannabis plant I've ever grown. The genetics are amazing. Everything from the bud structure to the fading patterns is what you want to see in a plant. The smell is amazing and it is completely covered in trichomes. More than last week which I didn't think was possible. They just look completely frosted over now. Can't wait to smoke test! I will do a video of the harvest and maybe some timelapse videos to close this grow out! Thanks for following along!
Likes
24
Share
@valiotoro
Follow
The spinning top stopped on the Bibiscotti Gelato ! Big fan of those dessert strains! Already rocked the Fast Buds autos, now it’s time to run the photos hehe. Got 100% germ rate, off to a banging start!🤩
Likes
57
Share
Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎
Likes
18
Share
week intel: every thing is amazing girls are ripening , we can now cause more e.c stress than before because: 1-plants are very mature now and can handle stress 2- at this week its the only stress that is helpful for increasing plant resins stresses : E.C stress around 1.6 and 1.7 3 times a week feeding: i replaced B-52 with Bloom Base Nutrient i feed them 3 times this week with this order : day 1 : i feed them high with base nutrients(calcium & micros (half dose) + Bloom) about 850 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them high dose of Top-Max + Bloom Base Nutrient around 877 ppm - 1.7 e.c to cause stress . day 5 : i feed them high dose of Feeding Booster around 850 ppm - 1.7 e.c to cause e.c stress again guide of the week : last weeks are time of ripening , and the only helpful stress is e.c stress at this moment
Likes
2
Share
@GrowinSho
Follow
Didn’t expect her to get so tall. My fault. I didn’t bend her back over a little though. Forgot to take that picture.
Likes
30
Share
@Dunk_Junk
Follow
The buds are fattening up now. Still no amber trichomes. Weather is hot here. Tent seeing 30+c at it's peak. I'm wondering if the heat is stressing her.
Likes
14
Share
Week 18 Gorilla Glue #4 (Original Sensible Seeds) 6 week of blooming This week I needed to change the arrangement of the pots ... Gorilla Glue #4 is with a full.... looks like an expensive perfume how wonderful :) Your heavy flower branches if unsupported will fall.... The plant was turned where it got less light ... I halved the nutrients... Week 6 Amnesia Amnesia 1 (Seedstockers) More LST continues to stretch 2 week of blooming Amnesia 2 (Seedstockers) Without LST continues to grow slowly with no sign of bloom Gorilla Cookies Auto (Fast Buds) 10 days It has already suffered a touch on the stem with the heating mat but has managed to recover, I hope. Godzilla Cookies (Herbies) 1 Day