Likes
Comments
Share
Can’t wait to see the quality of hash! Update: great return/ great terps and daytime effects 12/27 update pressed 1.3 grams of bubble hash came out lil waxy still a little wet, i’m drying in box on parchment paper with desiccant packs. In the refrigerator. Took approximately 48 hours to drive and had to re-sift twice and refreeze obviously. Not the easiest process to do it manually when you have a 20-30g puck of hash.freeze dryer is needed update: freah press is great in a 430 temp in 3dxl chamber. Did another 10 gram test run thru 25 u triple wrapped. Rosin is very nice quality.
Likes
10
Share
@Shefman93
Follow
Defoliated and lollipop the bottom of the plant at the end of week 2. Plant seems healthy, did an early top dress of 80% bloom 20% veg and I have began using the tribus bloom microbes inoculant at every watering. I will also be making banana peel tea to feed a boost this week.
Processing
Likes
3
Share
I love the smell it growing so well in this up and down weather in the tent lol but yeah it doing good and they all have different bud structures and I got a clone from each one I so amped cause I’m crossing this with blueberry Muffins is so terpy it’s crazy lemon and candy
Likes
147
Share
Hi all! now the moment has come when the buds began to grow in width! get fat and become covered with trichomes. the smell is magnificent, sweet fruity. the plant eats a lot. 5 liters of fertilizer per day. no wonder she started to get fat!)))
Likes
114
Share
@Natrona
Follow
RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea
Likes
13
Share
@GrowGuy97
Follow
Day 28 - She is growing great, extremely sturdy stock & seems to be taking g nutrients well! She is definitely starting to turn a darker color on top! Very curious to see how this turns out! Thanks for following & happy growing friends ✌️🏼🌱 Day 29 - All is well, purple is starting to come in on the top bud😍 Day 30 - Got watered today with PH at 6.3 Day 31 - ✌️🏼🌱
Processing
Likes
10
Share
Sour Hound is freakin' huge and she's not even really flowering yet. This could be the largest plant I've ever grown if she keeps stretching. I'm very excited!!! 😃
Likes
11
Share
@asbesto
Follow
Su una Alberta iniziano a cadere le foglie, forse sto tardando troppo per i 10 giorni di Ripen… Crescono benissimo, tutto sembra semplice.
Likes
9
Share
End or transition and ready to bloom!!! Stay tuned this is amaz
Likes
62
Share
I dry trimmed everything I harvested. What I mean is I cut all fan leaves while the plant was still in the ground. I trimmed what I could and hung the whole plant for a few days then separated branches. The ice cream cake and the large seedling are both still hanging intact. Ice cream cake was easy as it grew more like a sativa them the indicas I usually grow. Plant reached a height of 9 to 10 feet. Yield was some what diminished due to septoria. This strain seemed particularly sensitive to plant diseases.
Likes
3
Share
Week 12 and still go’n. I’m guessing another 1-3 weeks. And we keep waiting…
Likes
3
Share
Puues ya va quedando menos y se noota. Ahora si empiezo a ver que están engordando y da gusto verlo jajajaja a ver si las corto en breve que llevo el detox desde finales de abril y fuah! Jajajajajaja le tengo ganas a esto xD Hoy les toca agua con el Enzym y el Resin, voy a meterle bien para que drene y medirle la EC. Ya va quedando muy poco para acabar con la fertilización y empezar el lavado.
Likes
7
Share
Had them, in a glass of water, for 2 days, then planted them into small pots.
Likes
46
Share
Day 10: They have been growing nicely. Beautifull green leafs, no deficiencies or stress. I did some Defoliation and I'm planning to top some plants but not all of them since they make nice main colas as well. Also nice roots so far, will let those grow for another 1-3 days before repotting them into 7L pots. While doing that I will add some new clay for beneeth the pots to have a good run-off. I will add some mycorizza as well to improve the roots and I will water them again with lots of Regulator(anti-stress) and Rhyzotonic( root stimilator). Some days after that, they are ready to get pushed into flowering. Sativas like to grow twice and sometimes even more in size. So the size which they are at the end of this week will be enough. So at the end of this week you will see them being in 7L pots and in a bigger grow space under lots of lamps. There are like 3-5 plants not growing nicely. Might have to kill them. I'm not going to waste time,energy,nutrients on those if they don't grow in size in a couple of days. So might end up with just 235 plants. Il update again at the end of this week. Day 14: I almost finished the rest of the grow room. I still need to adjust and replace the lamps some more and other things. Did many defoliation below the plants. Thoose branches are never going to preduce nice and thick buds anyways. Such a waste of energy and nutrients. Because of the removing of branches and leafs, They get a better airflow and better exposure of light as well. So for now they look a little bit ugly haha and not so bushy anymore, but they will grow into fine looking ladies. I kept 5 or 7 branches each plant and some bigger plants I even topped because I don't want them to stretch alot. Another reason is that I want bigger stems. If other plants that didnt get topped, not improving stems I can still top them until the end of week 1 of flowering. I'm putting them into flowering, by putting the lightschedule to 12hours of light and darkness. It will take a few days before they start preflowering. The first buds will be seen in like 10-14 days. Untill next week!
Likes
6
Share
Week 4 for Space panda by atlasseed, End of week 4 for this cultivar, really wishing i had spare soil to put these these in 5L pots but i have to order some soon. At this point id of topped them both by now but they are getting any side branch growth. Im not in a rush with these girls because they will end up getting longer than 3months veg.
Likes
44
Share
@SooSan
Follow
12/12 + 102 jours Vu qu’il y a 16 plantes mais que sur growdiaries on ne peut mettre que 8 variétés j'ai divisé en 2 diaries pour le bas de la tente 1️⃣ 🏠 90x60x90 ☀️ FC-E 4800 => puissance a 75% 🍁 1x Black Bomb / Philosopher Seed 2x Amnesia Lemon / PEV Seeds 1x Blueberry / PEV Seeds 1x Blueberry / 00 Seeds 1x Wappa / Paradise Seed 1x Dark Phoenix / Green House Seed 1x Quick Sherbet / Exotic Seeds 1x Mango Cream / Exotic Seeds 1x Banana Frosting / Sensi Seed 1x Hindu Kush / Sensi Seed 4x Fast Mix / Sweet Seed 📎 https://growdiaries.com/diaries/122084-grow-journal-by-soosan 📎https://growdiaries.com/diaries/124052-grow-journal-by-soosan 2️⃣ 🏠 30x60x50 ☀️TS1000 => 100w = 54g 🍁 Quick Sherbet - Exotic Seed = 12g Quick Sherbet - Exotic Seed = 12g Quick Sherbet - Exotic Seed = 17,5g Quick Sherbet - Exotic Seed = 12,5g 📎 https://growdiaries.com/diaries/122080-grow-journal-by-soosan
Likes
12
Share
Привет друзья. Моей растихе сегодня 34 дня. Начал применять LST технику на 19 дне и продалжаю применять её через день, а 18 августа добавил ДЕФОЛИЗАЦИЮ С 20.08 ДЕФОЛИЗАЦИЮ делаю каждые 3,4 дня С 20.08 применяю технику LST каждые 3,4 дня На сегодняшний день влажность 63% Растение растёт хорошо. генетика радует. Всем мира и добра! #Smail_Seeds
Likes
49
Share
Day 28 - Full watering/feed to run-off 10%-20% at same strength as previous. (50% of maker recommended strength for coco use + cmx + root enhancer + kept extract organic additive) Day 31 - Decided lower lights by around 30cm 120cm to about 90cm. After about 8 hours the plants all suddenty wilted. They stay wilted through the night cycle as well, so I raised the lights back to where they were and they have bounced back, so I won't suddenly drop the lights by as much. If I do lower them it will be incremental. Day 32 - Bought a six fin 800w oil heater for the tent. Am going to place this under the oscillating fan and set it aiming to keep the tent around the 25-27c range. Hopefully this has the tent sorted for the rest of the grow. The humidity has been high lately due to the weather, so this might be about the only factor left to address, and I will look at getting a dehumidifier for the grow room if needed. Day 33 - Full watering to run-off 10%-20% at same strength as previous. (50% of maker recommended strength for coco use + cmx + root enhancer + kept extract organic additive) - Ordered humidity controller for extractor fan. - Ordered Temperature controller for Heater - Ordered IP Camera for remote monitoring Tent is now running fully sealed and using passive inlet and carbon filtered extraction to roof space. Plants are around 20-40cm high and the lights are 85cm above the canopy on full 480w. Day 33 - I have reduced the Light intensity from 480w to 420w. This seemed to really get a good response from the plants. I think as they've grown taller and the light intensity has quietly increased at the newly heightened canopy level the plants have been getting stressed. Day 34 - I've reduced then light intensity from 420w to 280w. I am new to the quantum boards and the concept of "too much light" so working out how much intensity, how much distance and so forth for the different stages of plants growth. I have a gut feeling 280w at 80cm might be a touch under-powered but I'll give it a full light-cycle or two to judge leaf growth and colour and make a call on whether or not to increase it or leave it as is. Day 35 - I found plants wilting during hthe night cycle without fan air circulation. So I've set the oscillating fan to run during night hours. Day 35 - I've turned up the heater a touch to bring the tent temp to around 26c. Infrared gun shows leaf temps to be around 24-25c which ideally I want to get to 27-29c - I'll aim for this metric once the other environmental factors are sorted (ventilation seems sorted so mainly just dialing in the light intensity). * I'm looking forward to setting up the heater on temperature controller, and putting the carbon filter ventilation on humidity control, and then mounting an IP camera in the tent. This should all be here in around 2 weeks. I'm looking forward to being able to view the temp/humidity and see the plants live without having to actually open the grow room. * The infrared temp gun is proving invaluable in testing leaf, coco and pot temperatures around the tent, which is giving a great view of how the heat from the heater/fan arrangement is being distributed - it shows a less than 1-2c degree variance across the tent which is just great. * Hopefully week 6 to come will be one with a lot less wilting incidents and the week that this tent achieves a somewhat final and stable environment optimised for plant growth and happiness. But so far every time I think I've got things perfected, another variable comes into play and I need to tweak something. Maybe by the end of this harvest I will have the whole process refined to a smoother less reactionary process.