What a mission, finally I am at the end of my four cycle, she’s my last plant to be harvested, sadly she lost 60% of her bud, her main stem and a lot of brunches snapped 😭😭😭😭😭😭 off during heavy rains, I cannot believe it, it has been four months last I posted, 😂😂😂😂, I so sorry, rest assured she reached harvest and there is proof, what a journey… so many times I wanted to give up and uproot her, but look at her now, she’s the most potent strain in the 4th cycle, and trumps everyone with aroma, taste and high. Cannot wait to do it again, this time with mOre maturity and care. She gave me 63grams, though the scale says 67, the plastic I weighs 3 grams.

Very very sticky i had to change gloves every 2-3 buds!🤓 Delicious smell🤤

it continues to grow without problems despite the heat wave with beautiful ramifications, can't wait to see what's next. Last transplant in a week 😎🌳

Meine kleine Blue Mazar hat das Umtopfen ohne Murren überstanden, die Wurzeln sind weiß und gesund, das ist die Grundlage für ein echtes Biest. Mit einer Spannweite von gut 18 cm und einem Stammdurchmesser von stolzen 0,6 cm steht sie felsenfest im Stofftopf, als wäre nichts gewesen. Ich bin extrem stolz auf ihre Entwicklung und bin gespannt, wie viel schneller sie jetzt noch wachsen wird 😊🐥

Sponsored by Mars hydro, thanks for the great support 🌱

21/11/2022 - Diamo inizio al primo giorno di vegetativa, ancora niente acqua, temperatura e umidità costanti intorno ai 25° e 70% umidità. Probabilmente domani alzero appena il dimmer della lampada visto che qualche piantina sta un pò strecciando. 22/11/2022 - Ancora niente acqua, aumentato il dimmer della lampada al 30% 23/11/2022 - Prima irrigazione, data circa 350ml per vaso con soluzione di acqua osmotica e 4ml/l di Biobizz Root-Juice 26/11/2022 - Irrigato per la seconda volta, stesse quantità e soluzione della volta precedente 27/11/2022 - Ho notato che le piante vicino alla coperta riscaldante stanno crescendo un pò più velocemente delle loro controparti nel lato opposto, per cercare di bilanciare ho cambiato di posizione le piante più vicine alla coperta riscaldante con quelle verso la porta del box, lasciando quelle centrali invariate,

Such a great ending to the week. We finally got to the finish line for growing. Now comes the dry and cure.

Week 2 and the clones are starting to veg nicely. Got some nice roots starting to develop in the nutrient solution so hopefully over the ne t week or so I should see some nice growth. Couple of the older fan leaves that came with the clone were starting to do more damage than good so decided to strip some and I'll do the others over the next few days Day 10 Uploaded some more pictures of the root system these babies are developing quickly. Next feed/water change is due tomorrow so I'll up the white shark powder to help aid the root growth and I'll also increase the fulvic acid to 2mm per litre of water Day 11 Added some shogun sumo boost at 1ml per litre and increased the cal mag 3ml per litre and increased the great white rooting powder to one and a half spoonfuls. Ok so now the plants they are looking nice and green the newer leaves have a really healthy smell of chlorophyll the older leaves that came with the clones look a bit worse for ware but are still doing more good than bad so they will stay for now. So I tried some kushman chiropractic techniques to increase strength and nutrient transfer. The first one my stomach was doing flips I was so nervous I thought I might snap the stem completely but all was good the plants dropped a little but have started to recover after only half hour in the tent. I will repeat this process once a week on the new growth Day 13 Started to use sumo boost foliar spray at 1ml diluted with 1 litre of ph 6.5 water. Cut off some more of the damaged leaves and they are all looking back to good health after the kushman chiropractic treatment Day 15 Got myself a ppm meter and checked my reservoir as I haven't used one during the grow I was expecting to be around the 450ppm mark but to my surprise it was at a lovely 380ppm. Solution temp is now constant at 22.2c humidity fluctuates between 55%rh and 73%rh Day 18 so I've added two carbon dioxide bags to the grow room to give these ladies a little extra boost. Nutrients and temps have all stayed the same. Now the plants they are all growing well some better than others but that was to be expected considering I'm using clones that where half dead when I got them. So I stopped the plants and did a little defoliation Day 20 New spider farmer ts2000 has arrived and what a piece of kit it is currently got it set to 60% will be keeping an eye on them to make sure this is not to intense for my girls. Viper 300 carbon filter kit installed and I'm very happy with the filter and the fan supplied got my intake fan set to about 20% to give a good airflow through the tent all in all very happy with my upgrades. Now the girls as you can see they are getting bigger and have bounced back after the second chiropractic treatment and the topping I did to them. I've moved my two 1000w led lights over to one side of the tent to give the coco experiment a bit more light. Not sure if I mentioned this but my tent I's 8ftx5ftx6ft. Please feel free to give me any feedback. Happy growing guys

Week 4 is flower-week! All of our ladies showed signs of pre-flower last week, now there are already visible buds growing. We had to adjust the height of #1 & #2 once again because #3 is just growing crazy. Can't go any higher than the current position without redesigning our whole setup so this will be the final adjustment (hopefully!). #2 is obviously very different from the other ones, she's a little behind in growth. Though, she does have outstanding red colored petioles in comparison to her mostly just green sisters. We increased the amount of nutrients for them since they'll need much more now. This is plant #3/3. She grows way too high for our liking but that's what we expected from the beginning anyways. We continuosly had to adjust the light and the height of the other plants until we can't go higher right now. So wherever #3 wants to grow to now, she's probably getting sunburned from our lamp.

==> Decreased the base nutrients for less Nitrogen She is doing great! Smelling stronger and with more personality than last week :D There are not many calyxes but they are swelling slowly and nicely :) Starting to get some purple colors in the buds already :D Her branches are thin and buds are gaining in weight so she is starting to fall! I will tie her up soon :D

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!guckt euch letzen Report an !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Blüte hat begonnen: Edit:11.05 Die Pflanzen sind innerhalb von 2 Tagen explodiert. Ich habe das Licht nun auf 75 Prozent gestellt und noch einmal Cal-Mag nachgegeben, da die letzte Gabe nur eine halbe war. Die beiden Titan sehen fast identisch aus. Die beiden Epsilon sind circa 3 Tage unterschiedlich, eine ist etwa 5 cm kleiner als die andere und hat noch kaum Blüten. Ich denke, in 3 Tagen wird das der Fall sein. Die Cosmos F1 ist im Umfang circa 50-50 cm, kaum Blüten bisher. Ich hoffe, sie wird nicht noch viel größer, da der Platz langsam eng wird. Ich bin von dem Wachstum dieser Pflanze absolut begeistert. Mal gucken, was die Blüte bringt. Edit ende Ich habe alle Blüten entfernt, die nicht im direkten Licht sind, und alle Blätter, die die Blüten bedecken. Die Pflanzen weisen einen Cal-Mag-Mangel auf, was bei der Blüte normal ist, gerade bei diesem Licht. Ich habe dem Gießwasser etwas Cal-Mag hinzugefügt. Die Pflanzen sind drei Tage älter als im letzten Report. letzte Woche : Die Pflanzen sind seit der Keimung auf diesen Fotos genau 30 Tage alt. Ich habe eine Pflanze ausgetauscht, da es sich um eine Epsilon F1 handelte, die vermutlich Mutationen aufwies. Sie hatte verkümmerte Blätter, die nicht wie die ihrer Artgenossen aussahen, und wuchs deutlich langsamer. Daher habe ich sie nach 2,5 Wochen ausgetauscht. Der kleine Mann(die ausgetauschte Pflanze) leidet natürlich jetzt ein bisschen unter Lichtstress, deswegen werde ich wohl nur eine sehr gestauchte Pflanze erhalten. Aber besser, als die Fläche leer zu lassen. So viel zu dem, was nicht funktioniert hat: Die Sanlight stand die ersten 2 Wochen auf 20 Prozent. Dann habe ich sie teilweise mit dem Dimmer höher gestellt: 2 Stunden auf 25 Prozent. Eine Woche später bin ich auf 30 Prozent und 2 Stunden mit 35 Prozent gegangen. Für Woche 4 habe ich 40 Prozent und 2 Stunden auf 45 Prozent gewählt. Ich erhoffe mir, die Pflanzen so schneller an die starken Lampen zu gewöhnen. Im Nächsten grow soll bei jeder Pflanze die TDS per Infrarot gemessen werden. Da werde ich dann ein Experiment zu machen, wie die Lichtsteigerung am besten umzusetzen ist. Zu den Lampen kann ich bis jetzt nur Positives sagen. Im Gegensatz zur dazugehörigen App, diese ist wirklich nicht sehr gut umgesetzt. Das Menü und die Einstellungen sind teilweise irreführend und nicht sehr durchdacht. Ich muss mir immer wieder die Tutorials in der App ansehen, da diese immer wieder angezeigt werden. Noch dazu hätte ich gerne die Möglichkeit, mehr Einstellungen treffen zu können. Das ist aber Meckern auf hohem Niveau, weil auch die App das macht, was sie soll, nur eben meiner Meinung nach nicht sehr gut umgesetzt. Die Pflanzen wurden von mir mit Klipsen aus dem 3D-Drucker gestützt. Diese Klips kann man Stück für Stück im Winkel verstellen, so dass man die Triebe damit neigen kann. Das habe ich von Tag zu Tag im Winkel verstellt, so dass ich am Ende einen 45-Grad-Winkel habe. Das habe ich insgesamt über 6 Tage gemacht. Die Pflanzen haben an sich ein sehr gleichmäßiges Wachstum. Die Cosmos F1 wächst so optimal, dass kein LST mit den Klipsen nötig ist. Ich habe an den Pflanzen keine Mängel entdecken können und auch keine Anzeichen von Mutationen. Die Pflanzen haben im Durchschnitt eine Höhe von 35 cm, wobei eine etwas stärker abweicht mit 22 cm (wieder eine Epsilon F1). Der Umfang mit LST bei der Cosmos F1 liegt ohne LST bei 20 cm im Durchschnitt, wo wir wieder die Epsilon im Negativen haben mit 14 cm. Die Pflanzen wurden alle entlaubt, das eine Woche vor der Blüte. Morgen werden die Pflanzen erneut entlaubt und ge-lollipoppt. !!!!!!!!!!!!!!!zusätliche infos werden morgen ergänzt + Fotos !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! *1. Foto Mutation: Dieses Foto wurde nur 5 Minuten nach dem Umtopfen der Pflanze aufgenommen. Vorher stand sie in einem größeren Topf, in dem sie genauso aussah. Ich habe sie umgetopft, weil ich den Topf brauchte, aber die Pflanze nicht wegwerfen wollte. Der Pflanze geht es gut, aber sie sieht im Moment etwas mitgenommen aus. Bilder folgen

~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 11/29- Here we go into Week 4 of flower for the FastBuds Strawberry Gorilla's and I wish I could say they are looking epic, but that's not the case. The #2 plant continues to be ahead of the other two, and is really frosting up nicely. The #2 and #3 plants look pretty crappy, and after examining some other plants in the tent I've got a good idea of the issue. The fabric pots that the plants are in are supposed to 'air prune' the roots, preventing them from growing outside of the pot, and instead growing a large mass inside of the pot. I pulled one of the pots from its bucket and it was disgusting, with rotting clumps of roots in the bottom of the bucket along with some nasty looking brown slime. The fabric pot also had roots growing out of it, along with that brown slime across the bottom of the pot...ugh! 12/1- Tomorrow I'll be doing another drain/clean/fill of the reservoir, after which I'll add Plagron Cocos 'A' & 'B' along with Green Sensation and Royal Rush. After adding the nutrients I'll ph the solution to 5.6-5.8 @ 70℉. 12/3- Yesterday I did the drain/fill and continue to have the Plagron nutrient level at 800ppm. The #3 plant continues to struggle, but nevertheless is flowering away and actually has pretty decent trichome production, which I wonder if the stress she's experiencing has an affect on either positively or negatively. 12/5- There is four weeks of flowering for the Strawberry Gorilla's. Although they sure could look a whole lot better, they for sure could look way worse. Hopefully, they'll start to look a bit better in the upcoming weeks... fingers crossed! 😎🤞 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚

Da ich nicht bedacht habe, dass die Lampe doch so viel Wärme abgibt, hat die kleine Dame kurzzeitig etwas viel Hitze abbekommen. Zum Glück ist es am nächsten Tag aufgefallen und ich konnte etwas gegensteuern, indem ich Die Lampen Leistung etwas runtergeschraubt und den Luftbefeuchter kontrolliert habe.

Barneys Farm Red Diesel Revegged Grow 7 Weeks of Flowering completed 31st March 2020 Hi everyone I hope you are all well. Despite the rain and high humidity this plant is still hanging in there. She is super resilient and so far she seems to be mold resistant 💪 However I do not wanna push my luck too far and will probably harvest at the end of the week . Thanks once again for reading my diary update & I shall see you next week 👍

Elle fait de jolie étoile ⭐️ bien givrée! 😲🤤Jour 49 . J’ai récolté une j’en prendrais des photos finale du résultat après séchage. Je vais attendre encore pour le reste parce que son en pleine santé!

New weekly video uploads and more! See what’s happening in the Cabbage Patch! Day 14 Flower! Plants looking very h@ppy. Can’t wait to get in there and give it’s last defoliation. Day 16 - She’s stacking up nice! Just need to water when dry. She’s on cruise control! Day 20 - Defoliation video for ya! Cheers 🍻

~ WEDDING CHEESECAKE FAST FLOWER by FastBuds ~ Well fam, here we go again with another epic strain from FastBuds Fast Flowering stable. After having such tremendous success growing their Gorilla Cookies Fast Flower outdoors last year, I've decided to run another of their fast flowering strains outdoors this year... Wedding Cheesecake Fast Flower! The best description of this awesome cultivar comes directly from my friends at FastBuds which is as follows: "A delight for the mind and body: Wedding Cheesecake FF (Fast-Flowering) is a delicious strain that offers XXL yields in a 7-8 weeks flowering cycle. This terpene powerhouse produces loads and loads of mouth-watering vanilla-creamy-cookie-scented terps with hints of citrus and cinnamon. In addition to its delicious aromas, this variety grows very well in both indoor and outdoor setups, yielding up to 650 g/m2 without extra maintenance, making it the ideal strain for beginners as it allows you to maximize yields while minimizing work. This super-fast feminized photoperiod version offers upbeat and energetic yet deeply relaxing effects that are perfect for consumers looking for a heavily focused, motivating, and creative high. It’s the ideal strain for those needing that extra energy boost to start a busy day on the right foot. Wedding Cheesecake FF boasts chunky, large-sized buds with a thick layer of silvery-white resin and bright orange hairs scattered all over: that just screams ‘quality’. The lime-green flowers sparkle with an array of hues ranging from dark to light green, to magenta and purple, and reek of a delicious aroma that’ll remind you of fresh store-bought cheesecake. This is an XXL hybrid that grows extremely tall in height, reaching up to 3m with one huge main cola and multiple long side branches that can withstand enormous yields of up to 650 g/m2 with ease. Wedding Cheesecake FF is extremely resilient to the elements and can be grown in almost every climate as long as you’ve got the space and basics covered, making her an excellent choice for those looking for large-scale harvests with a quick turnaround time without much effort." ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: This is going to be an outdoor grow, but I have started the Wedding Cheesecake FF indoors as our weather is still too cold to put her outside (nighttime temp's dipping regularly into the 30's℉). The plan is simple... let her grow inside under a 19/5 light schedule until the nighttime temperatures stay above the mid 40's℉, at which point she'll be moved outside and transplanted into the soil which I have already setup and inoculated with beneficial microbes, and then let the fun begin!🤪💚 ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 4/4- Here we go into the second week of life for the FastBuds Wedding Cheesecake FF, and she's doing really well! All I'm doing right now is making sure that her medium remains moist, watering only when necessary. I'm checking her root development daily and she will be ready to transplant outdoors any day now! 4/6- Today is TRANSPLANT DAY! I moved the Wedding Cheesecake FF outside to her prearranged 'new home' which I had previously prepped by adding some Coco/Perlite into the soil to improve the texture and drainage. I then pre-amended the soil with Gaia Green 4-4-4 All Purpose slow release dry amendment along with 3g of Wiggle Worm castings, 2 cups of ground Alfalfa and 1/4 cup of Extreme Gardening's MYCOS. After which, I kept the soil moist to allow the microbial colony to populate for a week. To transplant, I first made a hole then placed a Solo cup in it to make sure that the depth was adequate, then packed the medium up against the cup firmly which leaves a nice Solo cup shaped hole in the ground. I then wet the inside of the hole that I formed and coated the hole with Extreme Gardening's MYCOS root enhancer, after which I removed the Wedding Cheesecake FF from her Solo cup and placed her snugly into her new home! After planting her in the ground all that was left to do was lightly water her in... Let the fun begin!🤪 4/8- The Wedding Cheesecake FF from FastBuds is doing extremely well in her new environment. To be quite honest I was slightly hesitant to place her outside this early as we are only getting approximately 13 or so hours of sunlight daily. Based on my experience last year growing a Gorilla Cookies FF, which was placed outside at a similar time and did extremely well, I went ahead with the transplant, confident that she would be just fine. 4/11- I'm watering around every 2-3 days right now using water straight from my well through a garden hose... super simple! I do not worry about PH as long as the water isn't chlorinated and is good enough for me to drink, it's good enough for my plants and the microbial colony in the soil will adjust the PH to where they need it and at the same time provide the nutrients that the plant requires... again, nice and simple. Well there goes two weeks for this little lady. The next coming weeks should see an increase in size and vigor as long as the weather cooperates... fingers crossed!🤞 Thank you for checking out my diary, your positive comments and support make it all worthwhile! 💚Growers Love!💚😎🙏

Forbidden runtz fast buds è fantastica belle rese una pianta è arrivata 135g,altre,80g .......di 5 piante o- 450g. secco, ...in piu m'è uscito un finger i charas 😂

Fluffy buds but very sticky and frosty. Nice effects very strong and balanced. I enjoy it in day time like before going to sleep, terpens are very sweet and piny, i got two very different phenos but i love both. Nice run with some issues but great ending !