Overall this plant was great to grow, she just grew and was happy doing it the entire time, pretty good yield off a plant that was only about 12inches tall. Seemed to be a lot more resistant to deficiencies then the other two strains this grow. Definitely a great mid-day Smoke!

Mid week update: did the defoliation over a couple of days. she looks gooood. so many lovely buds. Stretch started this week! waaaaattttt. she's once again one BUSHY lady. was advised to limit pruning once flowering started, but things are getting out of control 😂. think i'm going to have to do some ladyscaping as a mid week update. Slow growth as expected with the lower set point on the reservoir temp (19 C) - as a result of a slight smell. still has the smell, but nothing in the water on on the sides of the reservoir so not going to worry for now. Bought another air stone and need to install ASAP. SO many roots and with sooooo much volume that the one stone just gets swamped. pretty impressive root system. Shout out to all the growmies that have helped me on this journey. Things are good.

Gracias al equipo de AnesiaSeeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Oracle Octane: Oracle Octane es una cepa altamente potente y con un alto contenido de THC elaborada a partir de una Blackberry Octane seleccionada, excepcionalmente rica en THC y aromática, y de la pesada Blackberry Oracle, inédita, de nuestro propio acervo genético. El desarrollo de esta carismática e impresionante variedad abarcó 8 generaciones y un enorme esfuerzo de cría. La variedad tiene un sabor intenso e inolvidable que recuerda a bayas dulces y limones frescos. Las plantas a partir de semillas crecen increíblemente hermosas y sus hojas y cogollos a menudo desarrollan tonos de rojo, morado intenso e incluso casi negro. Esta cepa vigorosa y ligeramente índica dominante tiene un tiempo de floración de unas 9 semanas, produce hojas grandes y alcanza una altura de unos 120-130 cm en el interior. 🌻🚀 Consigue aqui tus semillas: https://anesiaseeds.com/product/oracle-octane/ 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 3: Muy buena semana, he aplicado un riego solamente con agua de manantial para reducir la cantidad de sales acumuladas en el sustrato y se ha notado una mejoria . Creo que le quedan unas dos semanas por estirar, parece que va a ser una buena cosecha. Se mantiene un buen control del cuarto de cultivo gracias a @marshydro y @trolmaster. Mantengo las dosis de 1/3 de nutrientes recomendados por el fabricante. Potencia del foco 80%

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/07/21 👋😺Hi grow family!! We're beyond excited to try out this new MarsHydro LED for our latest grow, the SP-3000 is INCREDIBLY bright!! ..I have never seen a light more appropriate for a 4x2 tent in my life, we (happily) replaced 3 "600 watt" blurple LEDs with this single rig ( something we've wanted for a very long time). There should be no issue achieving perfect coverage, corner to corner with this light. Its been years since we've flowered under LED ( and never one of this quality), we're a little bias towards HID/CMH, especially my hubby but I think this might just be the LED that changes our mind! We'll be growing Gelat OG Auto by Seedsman (we've heard amazing things) for our first grow under the SP-3000, all plants in 5gl fabric pots, Promix-B (25% perlite) on a 20/4hr cycle. We're starting with 4 plants but if they become unmanageable, we'll move one or 2 of the plants to another tent. We use a glass of water and a paper towel as our germination method. We soak seeds roughly 24hrs and then in a wet paper towel for another 12-24hrs, we average roughly a 90% success rate doing it this way... Thank you for reading if you made it this far and happy harvests everyone! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -No-fan design: the SP-3000 uses an aluminum heatsink, and the driver can be removed then placed outside the tent🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/10/21 🤘😺 100% germination!! All seedlings have broken the soil today.. I'm so in love with this light!! ❤️💡🌱 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~

A sad week, I found bud rot and had to take my plants out and do a big check and remove all dense underdeveloped growth. It will be a pretty big hit on the yield I guess but the most important thing is learning and that I did. The bud rot could spread due to my RH being 65/70 at nights and it used to be +80 before, + bad airflow. I got new fans in the tent and my dehumidifier was ordered already but its not in yet. On the other side, the plants are looking pretty damn good, they smell amazing and 3 of the 4 plants is getting a very dense nug structure.

Holky jsou na začátku 7 týdne květu. Začínají silně vonět a palice jsou krásně pocukrované . Trichomi většina ještě průhledná.

Not bad not bad, by the looks of it she'll be a fatty but i just hope that she'll be ready at the same time as the others. What i want to know is how the bbc can predict when i want my harvest but can't predict when my fucking landlady will break in and faff about it my grow room, long story short 46 makes me 👺 anyways, boucing back from a scare nevermind mind her 46 is my focus lol oh my the things we do... enjoy ! 🚀 Induced resin production by dropping the lightschedule to 10/14 almost immediate effects were smelt, loud and clear : candy shop goodness ! this one is gonna be a sweet one ! 👊

Week 4 veg she looking happy.

7/3 So here we go with a new strain, this time I’ve prepared a growing bed so I can use all the space trying to achive a nice micro grow

Once again these girls don’t really need much just watering when dry but other than that we are on cruise mode. I have been checking trichomes for about a week now and man is she almost there I should be giving them lights out with in another week or two can’t wait

Buds werden immer dicker, Klebriger und süßer im Geruch Cold Flush wird anfang nächster Woche einmal durchgeführt

:)

Week 3: 4 of the ladies showed sex this week. The big girl popped pistils on day 18 and the other 3 ladies popped pistils on day 20. I hope ill get another week of veg before the growth spurt and fill out their pots. Training: during the 4 days of ponytailing i noticed the aggressive growth on the side branches, cant say it had a big effect as bending has. This week i held the branches down with wiring to create nice strong branches and ive been leaf tucking everyday. I lock the leave blades together with lower leaves to hold them in place but they wont stay down. Im trying to avoid selective deleafing till after the big growth spurt. Nutrients: the ladies had their first feeding last week and 2 waterings ph'd to 6.5 with 2 dry days between every watering. Ill be giving their 2nd feeding on day 25. Im raising the dosage of Canna Terra Vega from 0.5ml/L to 1ml/L

I forgot to add and mention that I also used to Ching and Beastie Bloom as well as open sesame been growing for 5 years and only use Fox Farm nutrients every crop was successful ask for fast Bud genetics well that auto speak for itself big and potent my get off work smoke night night 25% THC or somewhere in that range but it's potent

Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?

It is in bloom growing each day, I did defoliation the first day of the week and a little more training the LST The first two days of the week I sprayed both plants with BAC Foliar Spray just before lights out.... Every day I put CO2 pellets in a glass of water while the lights are on.

High y'all 👋 The girls are ready for flower but I'd like to see a couple more inches in height. I gave them all a good top dressing of flower food to get the dirt ready for the switch to flower next week 😁 They are already stacking up nicely and they are not in stretch yet. I cranked up the horse power on the lights today at 30" they are getting about 50 or so DLI which will drop when I switch to 12s and as they stretch they will get closer to the lights increasing the DLI again I'm excited for Hedgehog season 😛 See y'all next week... Cyrus