Ahojte všetci tak sme sa dočkali a máme tu krásne jarné počasie, ktoré už čoskoro bude veľmi ovplyvňovať môj kútok šťastia a vlhkosť bude nepriateľ číslo jedna. Samozrejme kitky sú ako Bratstvo Neohrozených a použijem Aero 360 kapsly na vlhkosť. Na začiatku 4. týždňa flower À la carte hnojív sa zatiaľ nemení, držím sa rovnakého tempa a čakám kedy začne obľúbený proces hrnček var a kitkám bude chutiť viac. Cal-mag Xtra je dosť silný a veľmi rýchlo vie dvíhať EC preto sa ho snažím dávať len každú druhú zálievku, pokiaľ nevidím nedostatky.Keby je taká možnosť chcel by som vidieť ten proces čo sa deje v koreňovej zóne vnútri v pote. Niečo ako tá rozprávka bol raz jeden život. 👉👉👉👉👉Bol raz jeden kutil ktorý sa v problémoch stravovacích pre kitky topil 😀. Ec čistej vody 0.5 tu sa začali moje problémy v kvete. Poďme pekne od začiatku. Celú vegetáciu som nepoužíval xmag calmag a všetko fungovalo hnojil som každú zálievku všetko podľa plánu. Výrobca udáva xmag Hnojit iba 1x týždenne ale ak som tam dával Magnézium 1ml začalo mi to strašne dvíhať EC k 2 a potom som začal dávať vodu hnojka fungovalo to do určitej chvíle keď tie kitky začali vykazovať hlad od hnojív. Ťažke tvrdá voda a calmag spôsobuje v mojom prípade,že sa mi tam usádzajú mineráli Ec prudko stúpa. Do tejto ruskej rulety som pridal enzimy canazim nech sa to tam trocha čo tam nemá byť rozloží. Samozrejme ten cal-mag hodím ale bude ho len mierne lebo nechcem sa potopiť ako Titanic. Preto aj predchádzajúce grow,keď som nemal EC meter a stále som tam dával Hnojky pálilo kitky lebo problém bol hlavne vo vode a keď som tam všetko namiešal tak to EC bolo vysoko a potom aj výsledky boli aké boli. Ťažke tento trn s päty som dal preč a kitka hneď po vstupe ďalšia zalievka ukázala s hnojkami hneď iné hodnoty a to som hnojku dal 2x za sebou. Teraz čakám ako sa to bude ďalej už správať a verím, že toto bol hlavný problém, ktorý ma brzdil a môžem dávať Hnojky už stále a nebáť sa, že to budem kaziť. Držte palce zdravý Kutil.

Soooo week 10 :) These girls are looking reeeeaaal nice SS1 (on the left) is <25 days from harvest and SS2 has still a while to go id say 😄 But all in all things are looking super good buds are looking super nice and frooosty with SS1 starting to shift its energy into budding whereas SS2 is still throwing out some wild pistols :) The smell is super strong which I’m happy about, some staaaanky skunkalicious bud🤤 I have stopped giving SS1 nutes, giving her only water after her flush in week 9and she’s doing awesome! SS2 I’m still giving biobizz grow and bloom 0.5ml/l ea. And she is also loving her environment Got some mushies growing in the one pot though 😄 pulled them out just to be safe still have to do some research :) might have something to say about the enviroment at the surface of the soil. ??

Hey Growers. These FastBuds Afghan Kush are coming along nicely. These girls are in their final week/s. I’m just watering and watching trichomes. I removed a bunch of leaves especially the damaged ones and the buds bulked up immediately and the frost poured on. The trichomes are bulbous and granular, they’re so big. The buds aren’t massive, but they are firm. I think that may be because of the XS2000. They are quite similar to the super lemon haze from last run. I’m totally fine with a bunch of buds the size and firmness of golf balls!! A bit more time and I’ll chop them down. Happy Growing 🌱

25-2: Throughout the week, I'm observing two phenomena simultaneously: a portion of the upper leaves turning a lighter green and/or appearing to have a yellowish hue. One plant has curled leaves at the top of the plant but limited to one layer of leaves. The tips are yellowed with dark spots. Due to rapid growth, the plant flew too close to the sun and burned its wings, was my assessment. In other words, light burn. The leaves becoming lighter are located in several layers from the top to halfway down the plant. I suspect there is a deficiency and perform a slurry test. The EC is low at 0.24 and the pH is good at 6.3. The soil is still too wet to feed, which presents a dilemma: feed with the risk of wet feet or wait a bit longer with the risk that the deficiencies become more severe? To mitigate this, I gave foliar feeding (Terra Bloom 0.5 ml per liter) by spraying the leaves without really wetting them. I did this just after the lights were out. A day later, I first flushed the plants with a few liters of water pH 6.4 and then gave them nutrients with EC 1.3 and pH 6.4: Terra Bloom (+/- 4 ml per liter), Sugar Royal (1 ml per liter), and a tiny bit of Great White and orthosilicic acid. And hung the lights back at 30 cm. It seems to be working because I see the color coming back slightly and the yellowing has at least stopped. Furthermore, I'm keeping the day and night temperature a bit higher at about 25 degrees Celsius during the day and around 21 at night. This is to limit the humidity at night and during the day to increase the VPD to about 1.45. At the end of the week I see the end of the stretch and standing 87 cm tall at average. The gas is on, and ready to go full throttle to the finish! SensiMiller Dr. Green Thumbs Plant Wizz GPT has the day off :) 23-2: "At week 9, our Skunk #1 Feminised plants have shown notable progress. The journey so far has been a blend of anticipation and strategic care. This week, we observed a robust growth spurt, a testament to the nurturing they've received. The balance of water, light, and nutrients has been key. Reflecting on the journey, it's clear that each decision, from the lighting schedule to the nutrient mix, played a crucial role in their current state. Their resilience and growth are not just a result of our efforts but a dance with nature itself." Dr Green Thumbs I can concur with my artificial assistant that the ladies are looking good and the strategy worked. However, this also required constant care, monitoring, observation, discussing the state of the plants, options, and mitigation with Dr. Green Thumbs GPT, and thinking ahead. SensiMiller

CSK 1 - PPM 1230 / PH CSK 2 - PPM

Last two weeks ive been lowering down the PPM close to 0 but right now is at 842PpM And I am going to continue lowering down thru this week til closer to zero. But for the very last week I am going to apply some extra molasses and some other techniques to see what happens... And on the other hand just make sure You Follow @cannagrowersiriuz Instagram official for more

Nothing much tae say really a hope the triple g makes it to the end of ita cycle and the unexpected church seems tae be a bonus beautiful looking healthy plant with a strong orange zest coming off it will also have the pleasure of an early smoke win win

She is starting to go from lime green to purple at the tips of the calyxes near the top of the colas She is definitely bulking up right now and slowing down with vertical growth and new leaves Smell is the same as last week. Insanely fruity and piney. Maybe more piney but hard to say I have definitely been overfeeding so I have been more strict with measuring and adjusting my feed water. Removing leaves that got crunchy and brown. New growth is deep green, so lowering the nitrogen next feed and she should be fine

Buds are fattening and the smell is a mix of gas, berries and something else funky I cant put my nose on it

Hello my friends 👩‍🌾👨‍🌾, This 8th flowering week was good 👊, maturation Buds continue 🌲❄️, I thought it will be the last week, but need one more. The end is for this week end I think, for moment trichromes not really full milky, and I like something like 20% amber. I've started flush with flash cleaner The senesence is started on the #3. 💦 1 Watering this week 1.8l/plant . Water + flash cleaner PH@6 Lamp @100% Bisous 💋😘, and see you next week. Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - TS 1000 https://www.mars-hydro.com/ts-1000-led-grow-light Mars Hydro - FC3000 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - SP3000 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light The High Chameleon - Bisous Au THC 💋💋🌲🌲😘😘 https://www.thehighchameleon.com/shop/bisous-au-thc-83

One of them is falling behind but thats prob because of the fact that she got a few less liters of space in her pot Date: 22.07.2024

Easy week, girls have been doing pretty good. The cronk nutrients are a bit of a learning curve. Very potent stuff, I have been working my way up and am still at 1/2 recommended dose. Noticed some yellowing starting on the bottom leaves, have started to increase nutrient dose, hopefully no burn. VPD has been good, they are just chugging along. Happy Gardening 🇨🇦❤️🌱😎💨

Finish,flush last week

Looking good

Week 7 Flower We've finally started flush 💦 on Day 43. I still run EM1 at 1ml/ltr as it goes a long way once activated/stretched. It's always going to be a benefit to keep any microbes you can in the coco. You can also use Mammoth P throughout flush, but due to its price I just stick to EM1 in flush. There's plenty of other microbes that can be used too. I flush around twice the pots' volume at 6pH. But before flooding the pot I slowly pour water through the centre of the pot, around the stem, in order to take a true reading of the ppm and pH of the run off. If the ppm/ec reads a lot higher than your average feeding throughout bloom, then there's been issues such as a lockout, incorrect pH, over feeding etc. This wasn't the case, as this girls' was at the right level. If the pH is too high or low, I adjust the pH of the rest of the water that'll be flushed to try to fix it. Again, this wasn't the case with this girl as she had a perfect pH 👌👍 Just before all of the water has gone through the pot, I take one last reading from her last bit of run off. The ppm should be down to no more than 100ppm for the first flush (+starting ppm of water if using tap water). After the first flush the ppm value of the run off will quickly go all the way down to 0, or at least below 50ppm (+tap water ppm). I use tap water that is between 150-190ppm, but I'm looking to switch to RO as soon as I can. I still get a very good flush, but I think using RO water will be the next step in getting a more thorough flush as it won't contain even the small amount of nutrients and metals that tap water contains (along with any harmful chemicals). Always remember to bubble or let the water sit for 24-48hrs before feeding to your plants. That goes for all feedings in every stage of growth if using tap water. Because I keep fairly low temps in the Den she's starting to turn a beautiful dark purple. Her buds are still swelling and smelling like a nice gassy OG, with hints of citrus/tropical fruits. I'm really looking forward to taking this girl down, but after at least another week! Thanks for following and happy growing! 🐺

3rd week of flower completed. They got a lollipop cut and a bit defoliation. Besides that I increased the light a bit to 950-1000 umol/m2/s, that’s a DLI of 41-43 mol/day. Nutrients got adjusted a bit. This week was overall a bit more chill because they stopped stretching so hard. I expect still a stretch but it shouldn’t be that much any more. Flowers start to build up more and more and there are already quite a lot of trichomes. At the moment I will push the plant regarding to light and the overall environment. But later on I will go for terp and trichome preservation and will lower the temps. Starting warm and getting colder to the end. Right now I aim for a VPD of 1.5-1.55 kpa. Let’s see how week 4 turns out. Conditions of the Grow: 💡 PPFD: 1000 umol/m2/s ☀️ DLI: 43 mol/day 🌓 Lightcycle: 12/12 h 💨 Humidity: 47-52 % 🌡️ 🌞Daytime Temp.: 23-24 *C 🌡️ 🌙Nighttime Temp.: 19-20 *C 🌡️🌱Leaf Temperature: 21 *C 🌡️💧Water Temperature: 19-20 *C Water TDS: 1100ppm | EC: 2200us/cm 🚰Watersource: Rainwater (TDS: 15ppm | EC: 0.03 us/cm Vegetation Equipment: 🔦 Lamp: Mars Hydro FC-E6500 📤Container: 3x DIY 63L Euro-Box with lid Pot: Netpot 2 inch 💦Pump: M.R.S. Ultimate Whisper Powerpump 22 bar 🚿Nozzles: 12x 0.3mm 🫧Waterfilter: 150 microns 🌬️Fan: 3x Clipfan 🌪️Duct-Fan: AC Infinity 200 mm with Controller and Carbon Filter 🍶Nutrient Brand: Terra Aquatica 🔬Sensors: Waterstation (EC, TDS, Temp, PH, Salt), CO2, Air Temp. & Humidity (VPD), Temperature-Sensor Root Container