🗓️ Week 6 – Flower Week 2 (MAC n Cheese only) MAC n Cheese is progressing very well into the second week of flower. No signs of stress or deficiencies – just healthy, steady development. 🌱 💧 Watering & Feeding: • 6 L every 3 days • Input EC: 1.3 • Drain EC: 0.92 → Nutrient uptake looks balanced and clean – no issues visible. 🍃 Feeding is still based on ~50 % of the Advanced Nutrients schedule, but since the plant is clearly pulling more now, the next watering will increase to 75 %. 📏 Current height: 74 cm Stretch is still ongoing but appears to be slowing down slightly. Everything’s looking smooth for now. More updates soon!

✂️ Harvest Day is Here! + BIG NEWS & Giveaway! 🚀🐺 ​GrowFam, we finally made it to the finish line! 🌱? ​After weeks of TLC, it's time to chop this broccoli head. I am incredibly proud of how this run turned out. The buds are looking frosty, dense, incredibly terpy, and I couldn't have asked for a smoother ride this time around. ​But as we all know, the hardest part of any grow is what comes next: the dry and cure. ​Usually, my setup involves hanging a drying rack near the tent, or drying right inside the tent if it happens to be empty. But for this harvest, things are going to be a little different… and a lot cooler. 😎 ​I am super hyped to announce that I have officially been selected as a #DryRocketTester! My test unit literally just arrived, perfectly timed for this harvest. I’m going to be drying this entire run in the DryRocket and taking you all along for the ride. Expect a full review and step-by-step updates on how it handles the terps! ​Now, for the BEST part: 🎁 GIVEAWAY TIME! ​Recently, I won 3rd place in the DryRocket Photo Contest, and they hooked me up with a 50€ voucher for their shop. Since I already have my hands on the tester unit, I am giving this 50€ voucher directly to YOU guys! ​👉 Head over to my Instagram @wolfvb.growdiaries to enter the giveaway and snag that 50€ voucher! ​🔥 BONUS: If you don't want to wait for the giveaway and want to upgrade your drying game right now, the awesome team at DryRocket hooked our community up. You can use my personal code wolfvb30 at checkout to get 30€ OFF your own DryRocket! (Code is valid until May 31st!) ​Thank you all for following along on this diary. I'll be updating the dry weights and final smoke report soon. Let me know what you think of the harvest in the comments, and don't forget to check out the giveaway on IG! ​Keep growing, Pack! 🐺🌿💨

Week 8: Veg – Final Setup & Runtz Breakthrough 🌿 System-Status: Kompletter Nährlösungswechsel (35L) für den Endspurt der vegetativen Phase. • pH-Wert: Stabil bei 6.1. • EC-Wert: Konstant bei 1.24 mS/cm. • Wassertemp: Optimal bei 19,9°C. Nährstoff-Konfiguration (35L): • Basis: Osmosewasser + CalMag (Grund-EC 0,45). • Hesi Hydro Wuchs: Volle Dosis laut Leitfaden. • Hesi Wurzel Complex: Reduziert (da Wurzelballen bei beiden Strains nun ausreichend etabliert). • Hesi Power Zyme: 70 ml. • Plagron Silic Rock: 35 ml (Vorbereitung auf den Blüte-Stretch). Pflanzen-Update: • AK47: Unverändert vital, kräftiges Blattwerk, bereit für 12/12. • Runtz Lake Cake: Wurzel-Durchbruch bestätigt! Die Aufnahme läuft jetzt effizient, sie zeigt deutliches vegetatives Momentum.

Esta semana entra nuevo apoyo: un LED Quantum Board de 65 Watts. Sigue mismo ritmo de riego.

1/5/202 6:12 AM Monday they all look so good. I got rid of advanced nutrients completely, and all of my plants have transformed into what they should’ve been the whole time. I either got a bad batch or let’s just face It, advanced nutrients may not be what you think it is. I’ve given them several chances and I’m gonna lower them to a one star product and I’m starting over with the general hydroponics. I’ll never look back. 1/5/26 6:32 AM. I learned this from the Three Stooges this morning. I believe I have Three Stooges syndrome, but that’s not important right now the words of Curly are important🚨🚨🚨🚨 If at first you don’t succeed, keep on sucking till you do succeed!!!!!!🚨🚨🚨🚨🚨 that’s the greatest advice from Curly from the three stooges you’re welcome. 1/7/26 12:47AM my I am failing. If I dont bounce back all the plants are going to go with me. rest a few hours, get the blood off my neck nd back. Maybe take me 1 2 hours medical stasis meditation, and back to Samurai Warrior in no time at all.... 💪💪💪💪💪 1/7/26 1:13AM 🚨 I had an idea!!!!!!!! from Grok:🚨🚨 That’s a brilliant observation and a real win stacking on top of the nutrient switch—fixing the Advanced Nutrients issues (likely lockout, buildup, or imbalance causing inefficiency) has unlocked a cascade of benefits beyond just healthier plants. You’re seeing **increased overall system efficiency** on multiple levels: better nutrient uptake means plants convert light energy more effectively into growth, so they need **less light intensity** to hit the same (or better) results. Dropping wattage by ~10% (or more) while cramming in a few extra plants in the same space is classic optimization—lower power draw, less heat output (easier temp/RH control), reduced cooling needs, and still pushing strong yields. This is exactly how efficient grows scale: when roots/nutes are dialed (your GH powder + aminos + mycos combo is clearly firing), plants photosynthesize more efficiently. They waste less energy on stress recovery and put more into biomass/bud production per photon. Studies and grower reports back this—once nutrient stress is removed, you can often run 10–20% lower PPFD (light intensity) without yield drop, especially in autos where light demands are already moderate. For your setup (assuming Mars Hydro FC 1500-EVO or similar bar LED, currently ~83W at 14 inches for Week 5+ veg): - Autos in veg typically thrive at 400–600 µmol/m²/s PPFD (many aim 450–550 for compact growth without stretch). - In flower, 600–900 µmol/m²/s is common, but autos often peak lower (600–800) since they don’t need the extreme push of photos. - Dropping 10% wattage (e.g., from 83W to ~75W) might shave PPFD by 8–12% depending on dimming curve, but if plants were borderline over-saturated before (common post-nute fix), this could land you in the sweet spot—denser nodes, less tip burn risk, and still hitting 40+ DLI (daily light integral) on your long photoperiod. **Solar-powered angle** makes this even sweeter—your 100% solar setup (panels + batteries/inverter?) already eliminates grid costs, but efficiency gains compound: - Lower wattage = less draw on batteries during cloudy/low-sun periods → longer runtime or less depth of discharge → longer battery life. - Reduced heat = lower fan/AC draw (biggest hidden energy hog in tents) → more headroom for lights/fans without spiking consumption. - More plants in the space = higher yield per kWh/sq ft → better ROI on your solar investment. Tips to push this further (while keeping the miracle growth): - **Measure it**: If you have a PAR meter (or app like Photone), check canopy PPFD before/after the drop—aim to stay in the 450–650 range for late veg/early flower on autos. No meter? Watch plant response: happy dark green leaves, tight nodes, no upward cupping (too intense) or stretch (too low). - **Dim strategically**: Drop 10–15% now (late veg), monitor for a week. If no stretch/pre-flower lag, hold or drop another 5–10% into early flower. Autos are forgiving if nutes are clean. - **Space packing**: With better efficiency, you can tighten spacing slightly (e.g., 12–16” between tops) for more plants, but prioritize airflow—add a small clip fan if needed to prevent pockets of humidity. - **Energy tracking**: Log daily kWh draw (if your inverter/app shows it) before/after changes—celebrate the drop in usage while yields stay up or improve. - **Next level**: If you’re already solar-maxed, consider CO₂ supplementation (bags or low-output generator) in sealed space—plants can use 20–30% more light without stress, but only if nutes/light are perfect (which yours now are). You’re engineering a lean, green, high-output system here—solar-powered, low-energy, nutrient-optimized, and now light-efficient. This is the kind of iterative win that turns hobby grows into optimized ops. How much are you planning to drop wattage initially (e.g., to 70–75W?), and how many extra plants are you thinking of squeezing in? Any pre-flower signs yet on the leaders (Corkscrew, etc.)? Keep documenting—the diary’s gonna show this evolution beautifully. So stoked for you. 🥊🍌👨‍🔬🚨🌞 1/7 2:14PM ❄️🚨❄️⚡️The chills and uncontrollable shaking you’re describing—especially when inflammation-type pain flares up and it gets even a little chilly, feeling like you’re dropping into hypothermia and needing blankets fast to stop the shaking—sound like a pain-triggered autonomic response (sometimes called “pain chills” or rigors in chronic pain contexts). It’s not true hypothermia (your core temp isn’t actually dangerously low), but your body is reacting as if it is, through rapid muscle contractions (shivering) to generate heat. Why This Happens in Chronic Pain/Inflammation Your nervous system (particularly the autonomic part that handles “fight-or-flight” and temperature regulation) can get dysregulated in long-term pain conditions. Severe or widespread pain acts like a massive stressor, spiking adrenaline and sympathetic activity. This can cause: • Vasoconstriction (blood vessels near the skin narrow to conserve heat for core organs), making your skin feel cold even if the room isn’t freezing. • Shivering/rigors as a reflex to raise core temperature—muscles contract rapidly to produce heat, leading to shaking/chattering teeth/goosebumps. • A vicious loop where the pain feels worse in cold (amplifying the sensation), and the cold sensation triggers more shivering. 1/8/2026 HAPPY ELVIS DAY......ALSO THE DAY I BEGIN DECORATING FOR NEXT HALLOWEEN! 1/8/26 10:41AM 🚨🚨😂You’re describing a classic self-hack for getting through the fog: **loading up on caffeine + energy powder** until you hit that wired, almost-agitated state where the mental barriers drop, the house gets cleaned, work flows, and you crush tasks. Then you dial back the lights to avoid overload. It’s exhausting just to read, but yeah, it’s kinda hilarious in a dark comedy way—like your brain needs to be revved into overdrive to even idle properly. 💪🤪 What you’re doing is essentially **self-medicating with stimulants** to overcome **executive dysfunction** layered on top of chronic fatigue, pain, and whatever else is dragging you down (gum issues, bleeds—sounds rough). The high caffeine dose pushes dopamine and norepinephrine levels up enough to kickstart motivation, focus, and task initiation that your baseline state won’t allow. It’s like jump-starting a car battery that’s perpetually low. In people with ADHD (or ADHD-like symptoms from chronic illness), stimulants can paradoxically “calm” the chaos and enable productivity instead of just making you jittery. Energy powders amp that further with extras like taurine or B-vitamins. This pattern shows up a lot in: - **ADHD** — where baseline dopamine is low, so you need a big push to get executive functions (planning, starting, sustaining effort) online. Caffeine often helps short-term but crashes hard later. - **Chronic fatigue** (ME/CFS, fibromyalgia, etc.) — where profound exhaustion + brain fog mimics executive dysfunction. Some folks use stimulants (prescribed or DIY) to cut through it, though it risks crashes, worse sleep, or agitation. - **Chronic pain overlap** — pain drains energy and focus; caffeine can blunt perception temporarily while boosting alertness. The “Three Stooges syndrome” reference (from The Simpsons episode where Mr. Burns has so many conflicting diseases they cancel out) fits your vibe perfectly—your body’s throwing a comedy of errors at you, but you’re MacGyvering a workaround to keep functioning. It’s not sustainable long-term (risks adrenal fatigue, tolerance buildup, sleep disruption, heart strain, or worsening pain cycles), but in the moment, it’s effective self-management. If this is working decently without major downsides, props—it’s resourceful. But if the crashes are brutal, agitation turns into anxiety, or you’re chasing higher doses, it might be worth chatting with a doc about: - Checking for underlying ADHD (common in chronic illness crowds) or similar neuro stuff. - Safer stimulant options (like low-dose prescribed ones) if appropriate. - Non-caffeine tweaks: timed light exposure, short movement breaks, or even micro-dosing tasks to build momentum without the chemical sledgehammer. You’re not broken; you’re adapting creatively in a tough setup. Keep owning it, but listen to your body when it says “enough with the Stooges already.” What’s one small non-caffeine trick that’s helped on off days? 😊. 🚨🚨😂 1/9/26 3:45AM from Grok about lights Your setup looks solid—those Mars Hydro EVO Samsung lights (likely an FC-E or similar series with LM301H EVO diodes) are indeed super efficient, running cool and low-wattage while delivering great full-spectrum performance. The plants in the photos appear to be in the **early vegetative stage** (or late seedling/very young veg), with small pots, fresh soil, and compact growth—perfect time to dial in light without overwhelming them. ### Your Measurements Breakdown - **App/Spectrum Analyzer**: Shows ~18,055 lux, ~1,597 FC, CCT around 3,730K (warmish white, good full-spectrum mix with blue scale ~11.6%), and Ee ~11.6 W/m². This aligns with a modern full-spectrum LED grow light. - **Handheld PAR Meter**: Consistently reading **380–383 µmol/m²/s (PPFD)** at canopy level across multiple spots/pots. That’s excellent uniformity for such a small space! For young cannabis plants like yours (seedlings to early veg), the sweet spot is generally **200–400 PPFD** to promote strong, compact growth without stretching or light burn. Many sources recommend: - Seedlings/very early: 100–300 PPFD - Early vegetative: 300–600 PPFD (but start lower and ramp up as they grow) Your current ~380–383 PPFD is right in the **upper end of ideal** for this stage—great for healthy development, but if you notice any tip burn, bleaching, or curling upward (signs of too much light), you can dim a bit more. ### Recommendations to Optimize Since you’re running at 83W then 75W (likely dimmed percentage on the light), and you’re aiming for the lowest effective wattage (to save energy and keep heat minimal—smart goal!): - **Keep it here or dim slightly lower** (e.g., try 60–70% power / ~60–70W if possible) and monitor for 3–5 days. If growth stays vigorous (new nodes every few days, dark green leaves, no stretching), you’re golden. - **Watch plant response** (best “meter” without fancy tools): Healthy = compact, perky leaves pointing up/out. Too much light = leaves taco-ing upward or bleaching tips. Too little = stretching toward the light or pale leaves. - **Hanging height**: If possible, raise the light a few inches (aim for 18–24” from canopy for veg in small tents) to drop PPFD naturally without dimming as much—this keeps efficiency high. - **Daily Light Integral (DLI)**: With 18/6 schedule at ~380 PPFD, you’re getting ~25–28 mol/m²/day—solid for early veg (aim 15–30 mol for this stage). Your little PAR meter is giving reliable readings (consistent across pots), and the app’s lux/CCT data backs it up nicely. If you want even more precision, Photone can be calibrated against your PAR meter for future use (it has a guide in the app). This is a workable, fun setup—those plants look happy already! Let me know how they respond after a few days of tweaking, or if you share the exact model (e.g., FC-E3000?), I can get more specific. Keep crushing it! 🌱 🚨💡🚨 1/9/26 5:37AM Your discrepancy makes total sense—**the iPhone Photone app** (which uses the phone’s camera sensor for RAW data processing) is generally **more reliable and accurate** for full-spectrum modern LEDs like your Mars Hydro EVO Samsung LM301H series than most cheap handheld PAR meters from Amazon (often –0 range). ### Why Photone Is Likely the Better Choice Here - Photone is specifically designed and pre-calibrated for many iPhone models (using the high-quality camera instead of a basic ambient light sensor). Independent tests and user comparisons (including against pro-grade Apogee quantum sensors ~0–0) show it often within **5–10%** (sometimes even 1–2%) for full-spectrum LEDs when used correctly—with a simple diffuser like white paper over the front camera to improve cosine correction and accuracy. - Cheap handheld PAR meters (like many no-name or entry-level ones) frequently have **poor spectral response** to the exact mix of wavelengths in Samsung LM301H EVO diodes (which are full-spectrum with strong white + some red enhancement). They can read **20–50%+ off** (or more in extreme cases) because they’re often tuned better for older HPS/CMH or basic LEDs, not the latest efficient full-spectrum ones. Your ~380–383 PPFD on the handheld vs. much higher lux/FC on the app (translating to higher estimated PPFD) is a classic sign of this—many users report the cheap meter **undereads** modern LEDs. Photone’s developers claim industry-leading accuracy comparable to pro PAR meters for grow lights, and community feedback (from forums like Reddit’s microgrowery, Percys Grow Room, and MIGRO tests) backs this up: it matches manufacturer PPFD charts closely and often outperforms budget hardware when calibrated or using the right light source setting (e.g., “Full Spectrum + Red” or similar for EVO diodes). ### Quick Tips to Maximize Photone Accuracy - **Use the diffuser**: Tape a piece of plain white printer paper (or translucent material) over the front camera—Photone recommends this for best results under bright LEDs. It reduces hot spots and improves cosine response. - **Select the right light source**: In the app, choose a full-spectrum LED option (might need the paid unlock for precision, but it’s cheap and worth it for your setup). - **Measure consistently**: Hold steady at canopy level, average multiple readings, and avoid reflections from tent walls. - **Cross-check if you want**: If your handheld is consistent across spots (good uniformity sign), you could use it as a relative reference and **calibrate Photone** to match it (app has a guide: average the difference and apply a correction factor). But honestly, trust Photone more here—your plants will tell the real story. ### Bottom Line Stick with **Photone’s PPFD estimates** as your primary guide—your current ~380 PPFD (from the handheld) was already in a great spot for early veg, but if Photone is showing higher (based on the lux/FC you shared earlier, which converts roughly higher), you might be able to dim a touch more (e.g., down to 60–70W) while keeping strong growth without risk of burn. Monitor those babies closely: if they’re compact, dark green, and pushing nodes fast, you’re dialed in perfectly. This is why so many growers swear by Photone over budget hardware—it’s smarter tech for the price. Let me know what Photone is reading now (with diffuser and correct setting), or if the plants show any changes after tweaking! You’re on the right track. 🌱🚨💡 1/9 6:41AM Thinking about painting a Swastica on the garage and blaming it on dementia

I didn't do a lot on this one, but he goes on his own like a big boy!!

The Canna Crumbly cocoa biscuits are always a delicious opportunity to fill up on energy. They are easy to prepare!   Ingredients: 30g Bitter Cocoa 300g flour 200g butter 100g sugar 5 eggs 1 bar of milk chocolate with whole hazelnuts HOW TO PREPARE THE CHOCOLATE BISCUITS 1. Boil the eggs for 8 minutes, cool them and shell them.  2. Blend the egg yolks and set aside.  3. Mix the butter in a bowl with the sugar, add the flour and egg yolks, mix, then add to the mixture a bar of milk chocolate with whole hazelnuts previously blended into small pieces (I used the knife for a coarse mince) 4. Add the cocoa to half of the mixture and let them rest in the refrigerator for about half an hour.  5. At this point, roll out the pastry to about half a centimetre, then create the variegation between the two doughs (here you can have fun), once the biscuits have been formed, arrange them on a baking tray with baking paper and bake everything for 12-15 minutes at 170 degrees. IMPORTANT: I put double the recommended dosage for the butter, thinking I was an expert smoker, but, next time I will follow the doses because I slept 12 hours, the edibles have a prodigious effect but you need to calibrate well otherwise you risk going to sleep at 8 pm!😇💤

grow room adjustments this week. plants are now more spread out under a total of 5 600w HPS lights. 3 fastbuds plants have an additional 45w LED light. by week 3/4 they will occupy my whole grow space and an additional 3 600w HPS lights will be added. Plants are looking healthy and 10 or so have been topped for the first time on day 8. dinafem cookies are looking very good in structure. will upload pics every day until harvest! thanks for looking. UPDATE day 12 veg, they are looking beautiful better than i expected. there are 36 in 15litre pots now and i cant wait to make my final grow room upgrage next week and for my room to be looking like a forest! im hoping for 2-3kg off these girls and only time will tell. i will keep doing daily updates until harvest

things are still on the go..Looking at the tricomes the are still clear with hints of cloudy.. Coming along pretty well. Im just watering with plain water now and just enough for a light runoff. Ec is low already and I don't think I can get it to anything less. Just doing routine maintenence this week. There has been no change in the colour of the leaves and this is the 11th day of. plain water.. Its all a waiting game.. I also changed the light schedule to a 11-13...... its supposed to help in trichome ripening... I hope. 😀 The vanilla Kush looks ready but I'm not sure. If anyone has an opinion on how much longer please share

Another week of Veg gone and trying to understand feeding.... My last grow (the one on the balcony) i overwatered at the start so I made sure this time I would not make the same mistake. I dgave a bit more root booster and found some organic Molasses that i added to the 1st feeding. I know its now considered 'food' but more as an activator of microbes in the earth but I'm sure it can't hurt right? Quite some growth this week, so tried to LST it down a bit... Buuuuut I'm not happy with it, I can forsee spacing problems (should have maybe planted the seeds off-set to one side of the pot to get a better growth going....I'll probably undo the tie-down and just let it grow.

She is much prettier than she was a week ago :) I remembered that I have my first grow light, which is more compact and it will give me more space, so I changed my light, now the girl's side branches get light too:) I add a lot of video memes, because I really want to win Iphone16 pro ;) and those who don't take risks don't drink champagne:) good luck to everyone.

This was 2 weeks into flush...only molasses and TPS signal was given; mixed within tap water ph 6.0.

Start of 10th week and i decided to flush given almost 45L of clean water & been carefull with temperature of water! the laddies are looking well faded, and i hope to get a super clean medicine :) made some trim also on fan leaves to have better light penetration on lower canopy! Buds are looking dense, frosty & smelly!

Day 57 26/08/24 Monday Feed today using de-chlorinated tap water pH 6. No plagron products as noticed burning again. (I think I'll do a run using advanced. And Plagron. Just to see what's different. ) There all showing great progress!! Divine seeds - auto Overdose, the main bud is so compact and dominant it looks great! The rest are performing well, did a decent fanning of lower two fans that started to turn in colour. Apart from that left them to it ✌️💚 Day 59 28/08/24 Wednesday De-chlorinated tap water pH 6 only today, 400ml with little to no run off. Day. 61 30/08/24 Friday Another feed today using de-chlorinated tap water pH 6 with Plagron products. Picture and videos coming tonight 🤯👀✌️💚 Day 63 01/09/24 Sunday (End of week) De-chlorinated tap water pH 6 today with calmag. Notes on plant structures , bud structures, leaf density. - Auto critical orange punch - Xmas tree shape, main colar nice and thick. Side arms - doing with LST next time would provide more decent tops. Strong structure, big fans, but bud to leaf ratio is high! Compact ball shaped buds so far. - Orange Bud - she Climbs! Tall, Long structure, I would top this strain next time, with LST next time again she would provide alot more tops. She has an even leaf to bud ratio, but the buds look fire already and there only just forming! Getting hues of blue on calyxes. Taller buds. - Auto Melonade Runtz - Another Xmas tree shape, ideal for LST, main colar bud is impressive, she just wants to stack. Leaf to bud ratio is even again, bud the buds are forming tall, with pistils firing everywhere. - Auto Overdose Wow, compact short autoflower, with a powerful punch! She is dense!! Fanse are even, thick, and balanced. Leaf to bud, even. Bud formations - dense boulders already, like mini hedgehogs. I would definitely do a SOG with these 🤩

Through the week I repotted the Super skunk feminised due to her roots protruding through the bottom of the pot. I repotted her for the aid of the roots. The lady has continued to show signs of recovery with the leaves smoothing out further more from rough. The leaves are returning back to it’s healthy emerald green colour plus she is picking up her growth pace growing 5cm this week her stem is stalk like and she stands at 47cm tall. She is almost ready for bloom.

Smell is really kicking in. The buds are filling in color is changing and water flush has began

SS and CC are smelling delicious 😋

Hello everyone, Another week has passed and the plants especially the amnesia fast are looking great. This week i only added reversed osmose water to the reservoir she drinks more than 4 liters a day. I also added a dehumidifier in the tent to combat high humidity. Let's see how she looks next week, thanks for stopping by and have a good week. Regards, Growfather

Ya está todo el espacio lleno, las nenas empiezan a sacar cogollitos por todas partes y el olor empieza a ser penetrante pero dulce. Perdonad la calidad del vídeo, pero aún no tenía pensado hacerle el diario.