The Silver Widow is entering flowering now. Starting to stack up and pistols starting to show everywhere. She is one big bush and the odours coming off of her is amazing. Received their first dose of Massive Bloom Formulation yesterday. Mixture fed was 400 ppm 0.8 ec of Massive Bloom Formulation, 400 ppm 0.8 ec of Floranova bloom, and 400 ppm of Floranova grow for a total of 1200 ppm 2.4 ec. Thanks to all my friends who pop by and say hello, and thanks to Kannabia seeds and their reps for some great seeds.

Buenas buenasss Enormes vienen estas oreoz de las chalotas, estan compartiendo carpa con otras pero ellas resaltan😍 Si vamos a lo tecnico parece que estuvieron con exceso de nitrogeno por el grow q les puse sumado al sustrato complete q va liberando nutrientes de a poco, nuevo aprendizaje jaja ya vamos solucionando de a poco con pura aguita, poca y seguido aunq me recomendaron hacer un lavado pero cada loco con su tema 😝 parece que igual se van desbloquando porq les habian quedado las hojas mas nuevas oscuras y arrugadas, con crecimiento lento pero desde q lo identificamos con mi amigo el jardin33ro, vienen creciendo mucho mejor

Hello growmies! Welcome to week 19 for Queen Citronella, this Super Lemon Haze by Green House Seeds. Planted as a Christmas gift to myself on 25th December 2022 it is now 1st May 2023 and we are on day 128. This it turns out was Citronella's last day living! The smell, oh god the smell, it's just the best. I will update the harvest when she has dried. I tend not to bother with wet weights as I don't really see what the point is, but I can tell you there is absolutely more than 500g here for sure. I am expecting 150-200g when dry. I accidentally dropped one of the smaller branches and it made an extremely satisfying "thud" when it landed.

The bud-ignitor is doing what it's supposed to do, Buds are already forming on the cherry's @ day 8. Switching to Canna terra flores next week and stop using the bud-ignitor, also i gonna introduce Budfactor X @ the end of the week. Also when the stretch phase is over i gonna do a defol and lollipop again cause it's getting crowded lol Rock on Dr Greenthumb's🌱

The plant was planted in a larger pot, which has approx. 60-70 liters of which approx. 70% Bio bizz light mix and 30% Bio bizz Wurm humus were used. The plant was tied down with a scrog net and slightly defoliated. It should work through the stress for another 2-3 days and then it will start flowering.

The phenotypes are now very distinct, the small plant's leaves go directly from green to dark plum colour they do not go yellow at all. Unlike the early orange bud. It almost looks like it has a blue light on it.

Been feeding just water ready for the chop. Some of them have all brown pistils and have pretty much stopped all together. The kalimist indica pheno is still flowering so I'll let it go until it looks ripe 👍

Not the most productive strain in my experience, but the sativa high in the beginning and indica in the end is cool=) Smell - cheese, pinewood and grass. Easy in growing. The plant of this strain likes phosphor during the flowering stage. Finishes to flower quite quickly. One of the top autoflowerings for me now. Не самый урожайный сорт, однако даёт очен сильный сативный хай в начале и индичный стоун в конце. Вкус - сырный сосновый, пряно-травянистый. Очень легок в выращивании, любит фосфор на цветении, довольно быстро отцветает) Теперь один из топовых для меня автоцветов)

DAY63 WEEK9 = Impatiently waiting till harvest time 😘 Beautiful to enjoy the plants ripening and finishing 😍😍😍 Congrats to BIOTABS, because their tablest are really superb 🙏 I'm super satisfied 😁😁😁 Wedding Gelato, Triple G, and Cookies Gelato are completely ripe.👍😃 All their buds are rockhard 💪😖 👉 Cookies Gelato have become completely purple with beautiful piled buds and orange pistils, and looks delicious. Smells of berries and 😵 👉 Wedding Gelato has round buds (easy to trim) with mixed colors : gold, brass, brown, yellow, red and green colors with orange pistils 😊 Fine and accessible smell, pleasant and no overbearing 😄 🙏 👉 Triple G will be the hardest to trim, because of her quirky shaped buds. She has big internodes and big buds scattered across her tall sturdy stalks. Beautiful buds, a pleasure for the eyes. Her smell is pungent, sometimes narcotic even. She will get you stoned in no time 😋 👉 Liberty Haze could have another week. But she lacks some nitrogen; watch her leaves turn yellow, and make her taste sooo soft 👻 She hasn't any purple or red colors, only green and yellow. Her buds are leafy, not that firm, but volumineus. She's soo sweet, with hints of lime. 😘 I defoliated the plants in week 3 because I had to treat the plants against spider mites. Because of this, the plants had fewer leaves, the light could penetrate much deeper and now the lower buds are ripen as well 🙏. I will continue to apply this technique in the future. 👍👍👍 These will be the last pictures before harvesting 😍

Not a bad week. Left unattended with nutrient feed. One got slightly over watered ,so I removed water line for a day or two to let it dry down. PH perfect nutrients really make it easy to have a low maintenance grow. Going to let them be for another week while I decided if I want to top or just tie down. Will update pictures and such as the week progresses.

#Day 123 #Week 6 flowering 💐 Oh my God, it's the 6th week of flowering The smell of children is crazy. This week I used advance hydroponics overdrive supplement at the rate of 2 mg/liter because it is really high quality. Thank you for your comment🙏🙏🌷🌷

This girl has had a great week. She has put on some good leaf growth, and has rebounded from the light stress. I had been doing bending her top over to expose the lower branches, no ties just repeating the process. She got transplanted near the end of the week into a 2 gallon pot, and got her first real dose of nutrients. RH has been steady at about 65% and temps are consistent at 78-79 degrees. The 2x4 tent is super easy to manage with the AC in-line fan/controller and a small 250 watt heater outside the tent at the fresh air draw. 😊 I think my plan for this one is to veg it out long enough, to do a single plant SCROG in my 2x4 tent. Happy Gardening.

Hola a todos!! Espero que anden bien 😃🤞🙏. Les cuento que esta semana han comenzado a crecer un poco más los cogollos. He ajustado el ph del riego a 5.8 para equilibrar el drenaje, pero me sigue dando alto. Igualmente regue con Top bloom 2ml x litro Y top candy 1ml x litro También añadi un riego solo con agua y luego el siguiente fue con trico mas de Namaste. El preparado de jabón neutro a calmado bastante los trips.

X

Ya estamos en plena floración y con las luminarias a max potencia... Evidentemente el aire acondicionado también está trabajando durante la fase de encendido. Flowa-Bloom es la estrella de los nutrientes a incorporar, pero todos son importantes... Así que sigo la tabla de fertilización de JUJU Royal al pie de la letra. Eso si, primero humedezco bien el sustrato con agua, para aprovechar bien la solución con los nutrientes y que no filtre por las macetas textiles. Riego cada cuatro días.

01.09.25 the three fast flowering strains keep dropping fan leaves and growing flower sites instead. Odor is slowly picking up on the balcony. The mildew from the Sherbets didn't spread and so far looks contained. I keep an eye on this and am ready to spray again if needed. Finally the Sherbets start to show pistils after the month of August is over, in which exotic seeds said the harvest would take place 😂. So kudos to seedsman for their genetics delivering as advertised and shame on exotic seeds for advertising harvest in August when flower starts last week of August.

Hey now, so week 2 is in the books, she is growing slow but steady, I will transplant her to an airpot on Monday, top her on Friday, then again the following week. Weather and conditions are perfect for seedlings, warm and humid. First time running anything from the ladies at Tastebudz in the UK, but so far so good. I am still feeding just plain H2O in Pro Mix Seedling Starter blend, but will be transplanting to a mixture of 65/35 Coco Coir/Perlite here in the next few days and will begin fertigation at that time. I plan to feed Cal Mag and Maxi Grow to get this thing going. Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled

Coming into the home stretch here. I've been flushing for a week, going to give her one more good watering then plan on harvesting this weekend. I still don't see any amber trichomes, but I don't want the dying leaves to cause any bud rot, so amber or not she's coming down this weekend. The smell is super STRONG!!!👍 Thanks to all who answered my question on harvesting. I've been having trouble selecting an answer. I contacted GD support, hopefully they get this fixed soon.

2nd net is up. Early bud formations are promising. holding up to the extremes pretty well, some leaves taking minor damage, but overall, she is holding up, gave her 1 night at 50F see how she would react, stressful. Not advised as it messes with her metabolism, but I want to see if it triggers any anthocyanin response. Love to see her purp up but no signs yet. Remember, For every molecule of glucose produced during photosynthesis, a plant needs to split six molecules of water. This process provides the hydrogen needed for synthesizing glucose and other organic compounds, while oxygen is released as a byproduct. Homework. If Rubisco activity is impaired and it cannot properly function or regenerate its substrate, the plant's leaves are likely to turn a pale green or lime green, a condition known as chlorosis. Essentially, Rubisco activity is highly regulated and susceptible to various environmental and metabolic factors that can cause it to become inhibited, leading to an apparent failure in RuBP regeneration due to a lack of consumption. Rubisco regeneration is intrinsically linked to nitrogen supply because Rubisco is a major sink for nitrogen in plants, typically accounting for 15% to over 25% of total leaf nitrogen. The regeneration phase itself consumes nitrogen through the synthesis of the Rubisco enzyme and associated proteins (like Rubisco activase), and overall nitrogen status heavily influences the efficiency of RuBP regeneration. RuBisCO is a very large enzyme that constitutes a significant proportion (up to 50%) of leaf soluble protein and requires large investments in nitrogen. Insufficient nitrogen supply limits the plant's ability to produce adequate amounts of RuBisCO, thereby limiting the overall capacity for photosynthesis and carbon fixation. Maintaining the optimal, slightly alkaline pH is crucial for the proper function and regeneration of Rubisco. Deviations in either direction (too high or too low) disrupt the enzyme's structure, activation state, and interaction with its substrates, leading to decreased activity and impaired RuBP regeneration. (Lime/yellowing) Structural Component: Nitrogen is an essential building block for all proteins, and the sheer abundance of the Rubisco protein makes it the single largest storage of nitrogen in the leaf. Synthesis and Activity: Adequate nitrogen supply is crucial for the synthesis and maintenance of sufficient Rubisco enzyme and Rubisco activase (Rca), the regulatory protein responsible for maintaining Rubisco's active state. Nitrogen deficiency leads to a decrease in the content and activity of both Rubisco and Rca, which in turn limits the maximum carboxylation rate, Vmax, and the rate of RuBP regeneration Jmax, thus reducing overall photosynthetic capacity. Nitrogen Storage and Remobilization: Rubisco can act as a temporary nitrogen storage protein, which is degraded to remobilize nitrogen to other growing parts of the plant, especially under conditions of nitrogen deficiency or senescence. Nitrogen Use Efficiency (NUE): The allocation of nitrogen to Rubisco is a key determinant of a plant's photosynthetic nitrogen use efficiency (PNUE). In high-nitrogen conditions, plants may accumulate a surplus of Rubisco, which may not be fully activated, leading to a lower PNUE. Optimizing the amount and activity of Rubisco relative to nitrogen availability is a target for improving crop NUE. Photorespiration and Nitrogen Metabolism: Nitrogen metabolism is also linked to the photorespiration pathway (which competes with carboxylation at the Rubisco active site), particularly in the reassimilation of ammonia released during the process. To increase RuBisCO regeneration, which refers to the process of forming the CO2 acceptor molecule Ribulose-1,5-bisphosphate (RuBP) during photosynthesis, the primary methods involve optimizing the levels and activity of Rubisco activase (Rca) and enhancing the performance of other Calvin-Benson-Bassham (CBB) cycle enzymes. Biochemical and Environmental Approaches: Optimize Rubisco Activase (Rca) activity: Rca is a crucial chaperone protein that removes inhibitory sugar phosphates, such as CA1P (2-carboxy-D-arabinitol 1-phosphate), from the Rubisco active site, thus maintaining its catalytic competence. •Ensure optimal light conditions: Rca is light-activated via the chloroplast's redox status. Adequate light intensity ensures Rca can effectively maintain Rubisco in its active, carbamylated state. •Maintain optimal temperature: Rca is highly temperature-sensitive and can become unstable at moderately high temperatures (e.g., above 35°C/95F° in many C3 plants), which decreases its ability to activate Rubisco. Maintaining temperatures within the optimal range for a specific plant species is important. •Optimize Mg2+ concentration: Mg2+ is a key cofactor for both Rubisco carbamylation and Rca activity. In the light, Mg2+ concentration in the chloroplast stroma increases, promoting activation. •Manage ATP/ADP ratio: Rca activity depends on ATP hydrolysis and is inhibited by ADP. Conditions that maintain a high ATP/ADP ratio in the chloroplast stroma favor Rca activity. Enhance Calvin-Benson-Bassham (CBB) cycle enzyme activity: The overall rate of RuBP regeneration can be limited by other enzymes in the cycle. •Increase SBPase activity: Sedoheptulose-1,7-bisphosphatase (SBPase) is a key regulatory enzyme in the regeneration pathway, and increasing its activity can enhance RuBP regeneration and overall photosynthesis. •Optimize other enzymes: Overexpression of other CBB cycle enzymes such as fructose-1,6-bisphosphate aldolase (FBA) and triose phosphate isomerase (TPI) can also help to balance the metabolic flux and improve RuBP regeneration capacity. Magnesium ions, Mg2+, are specifically required for Rubisco activation because the cation plays a critical structural and chemical role in forming the active site: A specific lysine residue in the active site must be carbamylated by a CO2 molecule to activate the enzyme. The resulting negatively charged carbamyl group then facilitates the binding of the positively charged Mg2+ion. While other divalent metal ions like Mn2+ can bind to Rubisco, they alter the enzyme's substrate specificity and lead to dramatically lower activity or a higher rate of the non-productive oxygenation reaction compared to Mg2+, making them biologically unfavorable in the context of efficient carbon fixation. The concentration of Mg2+ in the chloroplast stroma naturally increases in the light due to ion potential balancing during ATP synthesis, providing a physiological mechanism to ensure the enzyme is activated when photosynthesis is possible. At the center of the porphyrin ring, nestled within its nitrogen atoms, is a Magnesium ion (Mg2+). This magnesium ion is crucial for the function of chlorophyll, and without it, the pigment cannot effectively capture and transfer light energy. Mg acts as a cofactor: Mg2+ binds to Rubisco after an activator CO2 molecule, forming a catalytically competent complex (Enzyme-CO2-Mg2+). High light + CO2) increases demand: Under high light (60 DLI is a very high intensity, potentially saturating) and high CO2, the plant's capacity for photosynthesis is high, and thus the demand for activated Rubisco and the necessary Mg2+ cofactor increases. Mg deficiency becomes limiting: If Mg2+ is deficient under these conditions, the higher levels of Rubisco and Rubisco activase produced cannot be fully activated, leading to lower photosynthetic rates and potential photo-oxidative damage. Optimal range: Studies show that adequate Mg2+ application can enhance Rubisco activation and stabilize net photosynthetic rates under stress conditions, but the required concentration is specific to the experimental setup. Monitoring is key: The most effective approach in a controlled environment is to monitor the plant's physiological responses e.g., leaf Mg2+ concentration, photosynthetic rate, Rubisco activation state, and adjust the nutrient solution/fertilizer to maintain adequate levels, rather than supplementing a fixed "extra" amount. In practice, this means ensuring that Mg2+ is not a limiting factor in the plant's standard nutrient solution when pushing the limits with high light and CO2. Applying Mg2+ through foliar spray is beneficial to Rubisco regeneration, particularly in alleviating the negative effects of magnesium (Mg) deficiency and high-temperature stress (HTS). While Mg can be leached from soil, within the plant it is considered a mobile nutrient, particularly in the phloem. Foliar-applied Mg is quickly absorbed by the leaves and can be translocate to other plant parts, including new growth and sink organs. Foliar application of: NATURES VERY OWN MgSO4 @ 15.0g L-1 in a spray bottle. For those high-intensity workouts when 1 meal a day is just not enough! Foliar sprays are often recommended as a rapid rescue measure for existing deficiencies or as a supplement during critical growth stages, when demand for Mg is high. Application in the early morning or late evening can improve absorption and prevent leaf burn. The plant was getting a little limey yellow in the centre. Shortly thereafter, she was back in business, green mostly regenerated. The starting point [of creativity] is curiosity: pondering why the default exists in the first place. We’re driven to question defaults when we experience vuja de, the opposite of déjà vu. Déjà vu occurs when we encounter something new, but it feels as if we’ve seen it before. Vuja de is the reverse—we face something familiar, but we see it with a fresh perspective that enables us to gain new insights into old problems. Confidence is evidence... nothing more. You are confident because you have driven 10,000 times, you are confident because you have spoken 10,000 times. People think confidence is a feeling, but it's not. If you want more confidence, then you need to create evidence, take more shots, collect more data, build more experiences, take more risks; fail, confidence doesn't come first; it is the reward you get for doing the work. no one else wants to do.