Likes
1
Share
The bud looks thickening trichromes,more pungent and pistil change color to orange.
Likes
40
Share
@Coopmc
Follow
Looking like 2 more weeks to Glory!! Oh yes this looks good! Looks like a bit over a week left maybe 2
Likes
18
Share
@CRK00
Follow
16th Week Report 30/01/20 - 06/02/20 Had a look to trichomes and she was almost ready, consequently I didn't filled/changed reservoir from last week 06/02/20 Harvest Day! 2nd Harvest Wet Weight Is 440g! 💦💦 All the lower growth yielded more than the bigger colas from first harvest (350g Wet Weight) Nothing particular to say, trichomes are 5-10% 🔍 Amber, even the lower buds got some purple tones and while I was trimming them I sniffed the best weed flavour I ever felt in my life! The 2nd Harvest day was a week away from the 1st Harvest day! "Harvest Week" will be published when buds will be dry 😋 Last Update 06/02/20 See you guys ;)
Likes
14
Share
Erntetag für meine Lemon Orange an BT60. Mega frosty Blüten. Mehr nach dem Ernten. Update: Die Ernte ging sehr schnell, da sie nicht viele Verzweigungen gebildet hat. Erntemenge ist jetzt nicht im XXL Bereich, aber immer noch XL.
Likes
19
Share
@Comfrey
Follow
Tropicana flowers 🌞☀️🌤️🌦️🌧️ Plant is 15 cm high because of low stress training. The length is 31 cm. Day 36: Sun is shining, 15-23 degrees, high humidity. Tropicana gets two liters of pure rainwater. Spend the day in my veggie garden working. In the evening I brought some 🐞for Tropicana because I spottet a few lice. My mood changes drastically as I find spider mites eggs, first and second stadium. Don‘t overthink that and decide to defoliate the plant immediately. I prepare a tee out of the leaves which brings fast relaxation. My mood is much better now. Day 37 In the morning with better light I find more spider mites and decide to wash the plant with rainwater. Can‘t find after any more of these little killer dwarfs. I decide to bring more beetles and check the leafs more often. Temperature is felling under 20 degrees, it‘s raining and the humidity is 87%. Day 38 In the early morning I couldn‘t find any mites on Tropicana. Got to continue controlling this in the next weeks regular. I‘m sure they are still there somewhere hidden in a dark spot. 🌦️ 13 - 21 degrees and humidity is around 60-70%. Day 39 🌦️🌧️ Very rainy day. Just let Tropicana enjoy life and tie down the top one more time. 🐞 stay since some days. One on every plant. I think the mites are a result of their start inside and no hygiene at all. Have the same with my peppers some years. 14 - 21 degrees, humidity around 84% Day 40 🌧️☁️🌤️☀️15 degrees, humidity 83% We listen to Roots Reggae, Tropicana is happy and quite busy with producing new roots, I guess. Don‘t understand when to stop low stress training. I think it’s enough now. She needs a rest. Day 41 🌧️⛈️🌧️🌧️ 15 - 19 degrees, humidity up to 89% We had rainfall today around 65 liters of water. I collected enough of it for the next weeks. Day 42 ☀️ 6 - 23 degrees. Humidity is falling. Tropicana enjoys the morning sun while she drinks and drinks and drinks…. Coffee. 😅
Likes
16
Share
Hei hei,the lady enjoyed some sunny days and is doing just fine.Her flowers are starting to look nice and thicking up slowly but surely.No nutes this week. See ya next week.Happy growing.
Likes
8
Share
Both Barbarian (=AK-47 x Barbara Bud) plants are filling up more and the first pistils start to get brown, which shows the plants start to ripen and go towards harvest time. The smell they exude is STRONG now and VERY PLEASANT. The aroma is sweet, peachy with sandalwood undertones and is MOUTH-WATERING. The plants are TRICHOME MONSTERS and are covered in crystals, any little touch and your fingers stay sticky for hours.
Likes
9
Share
KICKASS AUTO by KANNABIA Week #5 Apr 30th- May 7th This week was the last week of veg as she started to pre-flower towards the end of the week she's 16 inches and so growing she has side branches that are also growing at a good rate she going to be a shorter busy lady. She looking 👍 nice and green no issues this week. She's loving being outside!! Stay Growing!! KANNABIA.COM KICKASS AUTO
Likes
18
Share
@Luca90
Follow
Today 23/07/22 We are two days into week 5, never talked about nutrient or water’ problems I had some leaves with few yellow marks but very small one beside that I always saw my plants green and happy, here you can see the scrog I set up yesterday not sure if this will work better but I think will help the branches grow further from the others increasing the light they riceve! I made it myself I will order one for the next grown when I will get my grow box! The watermelon is already flowering but the northern light no so today I started feeding the plants with different preparations.. I kept on giving the grow booster with a bit of bloom booster and viceversa for the watermelon! If you have any tips anything you think I’m doing wrong or you see it’s not ok let me know I don’t grow in a box I grow between the curtains and my window so the environment wasn’t always the perfect one
Likes
47
Share
Veg: She got a long 5 months 1 weeks of growing and growing so big. Kept the feeds up and she drunk everything she got given to her, kept drinking and drinking them foods. I gave her the growth technology grow for the first 4 months of veg and the last month I gave her both growth technology grow/bloom, hydro Coco grow for the last month of veg stage. Gave her so much HST in month 3-4, just kept topping wherever I could, bending her over wherever I could. Really trying the stress her out to make her stretch and stretch. Started to see some real growth in her in the last month of veg stage, just seeing her doubling in size every week till we got in to some true flowering. Flowering: so we got about 8 1/2 weeks of flowering which was amazing. At the beginning of week one we saw some little flowers and by the end of that week we had some beautiful flowers starting to appear. I start pumping as much bloom feed in as I could I was still giving her the grow feed, but slowly bring them down by the end of week 2. We got some amazing weather other these weeks of flowering were we saw these bud truly start to go bigger and bigger, maybe the weather was a bit to hot for the plant at some points in the early flowering as we got some leafs burn from intends sunlight in the greenhouse. In week 3 we had a weekend of extreme heatwave over the country hitting highs of 34c witch in the greenhouse was getting up to 45-50c too hot!!! The water system failed on this weekend as well, what really hit her hard. I did think we was going to loose her that day when I went to see her. From that day I think we all realized that we have to keep a good check on the watering if the days were going to be so hot. I took all the small stems off the plant and really open up the bottom so we could get some more airflow over these really hot weeks we had, it was amazing to get this weather in the UK. Week 4 we did really start to see them buds coming everywhere, the middle of the plant was stretching. By the end of week 4 I think she did stop stretching and started to fatten up. I cut the growth feed out in the end of week 2 but I think I should of kept it up with the bloom feed till we got in to week 4. We was loosing a lot of leaves all over the plant when we got to the end of the stretch, so I pumped her some growth feed with all the same feeds she was on at the beginning of week 5. We did see a lot of leaf improvement all over the plant, with new growth on all the main clones. This played a big part in getting them buds fatter and fatter. Getting to the end of week 5 I stop the growth feed and just gave her more bloom and pk boost double. We really did see some buds popping up everywhere which was amazing and we had no real popcorn corn buds cause of opening her up. Week 6 she was drinking and drinking up everything we would give her no problem, got to get so much food in to her. She must of drunk over 30l of feed mixture doubled in this week. Started to look a lot bushy all over. When we hit week 7 them buds were fat and starting to lean around everywhere so had to give a bit more support, I tide the main clone to the four main canes and then tide all the side clones to wherever I could. She still drunk 25l of double mixture over this week and the temperature in the nights was getting so low this week it would of been getting to 8-14c, then greenhouse did still get nice and hot during the day up to 18-26c
Likes
8
Share
@MTUZZIO
Follow
starting to see some crowning. nice stretching going on. very happy with how it's all going (except for the wyze camera timelapse, which still stops working halfway through the week) I do have some weird stuff going on with one plant, I'll post some pictures, if anyone has any advice. the only thing I can really find online that looks like this is tobacco mosaic disease, but I don't think it's that. maybe this one plant had a little extra stress or something. I have some of that mosaic looking pattern. it's showing up mostly on one plant, and like two leaves on one other plant. maybe calmag defiency? i guess it can kind of look like that, and my RO system was down for a week or two so I had to use tap water, and to keep EC consistent that meant less nutes for a week or two (that was taken up by the tap water EC of like 150). anyway, super excited. wish i had more to do, but it's pretty much just riding it out at this point. was crazy busy with work this week, i wanted to have got in a good defoliation already but I will get to that this weekend. going to remove everything below a certain point, all the lower leaves and the lower nodes that aren't going to make it to the top. probably going to put a trellis net up as i don't think they are going to be able to support their own weight once they start to really stack. i may do one or two final foliar sprays, all organic stuff, but one last IPM and maybe one amino acid / coconut water / aloe / bloom boost after the defoliation, just to help them bounce back quickly as i'm going to be removing a lot of biomass. all that is organic and there are barely flowers on so i'm not worried about it. getting such a strong lemon scent off these already, skunk is starting to come in. can't wait to get some real flowers on them and for the terps to develop. i'm not going to judge yet, but i think if i was to run these again i wouldn't do quadline. quadline was super interesting to me when I first started growing, but after having a bunch of grows under my belt, really i think my preference is to mostly let them grow natural, maybe supercropping the main cola, but my favorite grows have been the ones i did the least amount of hard training on. not sure why i decided to quadline this run, but i'm happy with the even canopy so it's all good
Likes
10
Share
@TechDCo
Follow
27/03/2026 Lite defoll and tucked! 28/03/2026 The pistils that have turned brown are a mixture of ones turning brown because i gave them a sun shower after i pollinated some buds. I think more budsites many have got pollinated and picked up an air stream. Never mind; hopefully not all budsites.🤞 Back to rhe Future is a saw eye to grow but she's one hell of a smoke. Lights-Off Nothing to do but admire the beauty of Bubblegum (right) Back to The Future isn't a pretty flowery. She's on the same feed bubblegum but her land race genetics hates nutes. 29/03/2026 Lights on! Topped up reservoirs! Midday; tucked the stretch and a lite defoll I accidentally snapped one top but it doesn't really matter there's like 40 colas! Just means more room for the others to swell! - Watch the VT clip! - keeps getting errors in upload! Will try again later! ....... 30/03/2026 Installed the second Gativa CT E2000! LPT - Low Profile-Training = Indoor Viticulture I coded it the "Tri-Layer Tension Grid" - TLTG! It's not LGBT haha Midday: turned light upto 115% now that I have two installed sharring the same driver. Work with the golden ratio numbers. 66.33.69. Wall draw is 666.6watts. Master controller is lying 🤥 #QuickVideoOfSetup&Grow Diary Entry: March 30, 2026 | The 27°C Truth ​Status: Zoned on Back to the Future leaves. Processor speeds: Overclocked. ​The world is "Jogging" itself—running in circles of Political Jargon and "Made Up" problems. I can smell the False Flag coming like a "Ball Bag"; it’s the scent of the gym, the scent of the seed, the scent of a system sweating to keep the Property Bills hardening. They’ve "had us had," putting "Carrier Bags" on reality and warning us not to breathe. ​But the "I Intel" sees the lag. ​ The Hardware Calibration ​I’ve reset the Parallel Gativas to 100%. The "Master Controller" is throwing a 35 {C} "Jargon" spike at the ceiling, but I know the Structural Truth: the canopy is a perfect 27{C}. The Bellows are humming, the TLTG (Tri-Layer Tension Grid) is locked, and the 60-Cola Army is drinking the "Luminous Pressure" without the "Inverse Square Law" drop-off. ​The Internal Purge ​The Bubblegum gave me the "Flow," but the Back to the Future leaves have given me the "Quantum Scan." Both had Methylene Blue and Hydrogen Peroxide baths and put in Purgatory during seedlings. Biofilm purge of the vortex root gone. Hopefully i get maximum performance for purging the sluge from it acentory DNA the cells. Both have handled the TLTG (Tri-Layer Tension Grid) just fine under this LPT - Low-Profile Training Tri-Layer of nets. Remember: I "POLLINATED" a few buds on theses for my own strain. So they're not hermaphrodite you'll be see but my cross breed with MagicMarkerXZZTOPZ. " - I’ve spent the morning "Feathering the Jolts" of a mad world." ​The Herd: They "Shelve the Lies" and beg for help to fund their own cages. ​The Architect: I fund the ritual. I purge the "Bio-sludge." I am the Charcoal Land that filters the flood. ​ The Shutdown Protocol ​The Glove Firewall is down. My eyelids are finally hitting that "Heavy" gravity. I’ve "Intelled" the speeds of my internal processor from deep meditations and identified the "Logic Leaks," and now it’s time for the Methylene Blue and Peroxide to anchor the repair. ​I’m laying down Fresh as Fuck. The "Farm" can keep its "Jargon." I’ve got the Master Code. "Telling us to relax and just let go; while they show us wars using lego" - Its all in 😁 Fun mane! ........... 30/03/2026 Midday on 100% split; power supply between two Gativas CT E2000s. Back to the Future seems to be enjoying this farm of light scattering photons. This should as well expand the efficiency of the diodes from level the load of heat dispersal. Lowing its throttling rate in a smaller tent. Talking about throttling..... ...Thermal Decoupling & The Wizzard’s Flow ​Status: Hardware relocated. System breathing. Gravity setting in. ​The "Lizards" want everything under the "Drapes," but I’ve just moved the Gavita Internal Controller and the LED Driver out of the cupboard and into the cold air. Inside, it was a "Made Up" furnace—too hot to touch, a "Static" spike that was likely throttling my 666.6W potential. ​By pulling the "Heart" out and resting it on bricks, I’ve given the system the Vascular Flow it needs. The driver can now radiate its "Luminous Friction" into the 22°C Room Baseline, keeping the tent at the 27°C Truth. ​The Architecture of the Feed ​I don't disturb the TLTG (Tri-Layer Tension Grid). I’ve "Intelled" a better way. ​The Tube Logic: I fill the DWC Reservoirs through surgical tubing. No lifting, no "Jolting" the canopy, no breaking the "Pancake" symmetry. ​The Glove Protocol: Black gloves on. Hands-on the hardware. Pure Sovereign Maintenance. ​The Internal Scan ​The 666.6W draw is the "Mark of the Wizzard," but now that the driver is cooling, I’m watching for the "Logic Leak" to plug. If it was throttling due to the heat, the "Processor Speeds" of the photons are about to hit a new Native Frequency. ​The Final Shutdown ​The room is steady. The Parallel Gativas are hammering the resin. The Bubble Wizzard has sorted the thermal lag, and the Glove Firewall is officially dropping. I’m laying down with the "Heavy Eyelids" I've gained 4watts of power cooling the driver. The "4-Watt Gain" Architecture (The Thermal Unlock): ​Voltage vs. Resistance: When that driver was "too hot to touch," the internal components were struggling. High heat increases electrical resistance. By cooling it down to the 22°C Room Baseline, I've lowered that resistance, allowing the electrons to flow with less "Static." ​Throttling Reset: Most high-end LED drivers have a "Thermal Foldback" feature. It was likely "Jargoning" my power—quietly dipping the wattage to save itself from melting. Now that it's breathing, it’s pushed from 666.6W to 670.4W. That’s 4 watts of Pure Photon Pressure you i was losing to the "Lizard" heat trap. ​The Gram-per-Watt Shift: These 4 watts might seem small, but over a 12-hour cycle, that’s extra energy being "Jogged" directly into the resin of the Back to the Future and Bubblegum plants. ​The "Bubble Wizzard" Diary Entry Update ​Status: System Overclocked. Thermal Throttling: Bypassed. - it's all in fun mane; creative writing ✍️ .... End of day: Few hours later; before lights off The Nutcracker "Waltz of the Flowers" - by Pyotr Ilyich Tchaikovsky Lets Dance 🕺 🤪 ...... I see more "Bud-Bearing Sites" per Square Inch than a "Stretched" plant could ever dream of ..... #FUNFACTS When a plant puts all its energy into those massive "Solar Panels," it’s often a sign that it's struggling to find enough Photon Pressure. It expands the surface area of the leaves to "catch" whatever weak signal is available. In the "Lego War" diaries, people see those giant fans and think "Power," but the Architect sees a plant that is shading its own potential. ​The "Airy Bud" Architecture (The Logic Leak): ​The Diffusion of Energy: On a stretched, leafy plant, the Vascular Flow has to travel further. The nutrients are spread thin across long internodes and massive leaf stems (petioles). This results in Low-Density Floral Clusters—the "Airy Bud" that looks big in the tent but "Vanishes" once it’s dry. ​The "Shadow" Penalty: Those big leaves create "Static" for the lower budsites. Instead of getting the 3.0 mu mol/j "Cold Fire," the lower flowers are living in a "High-Fidelity" eclipse. This leads to "Larfy" growth that never "Hardens" into the Sovereign Resin you’re after. ..... The Purgatory Dividend ​Status: DNA: Scrubbed. Hardware: LPT-Hardened. Results: 19% Overclocked. ​I’ve "Pulled the Drapes" on the standard "Seedling Jargon." I put them through Purgatory for 2 weeks with the Blue and the Clear. I "Cleaned the Code" before I "Saturated the Logic." Now, the Bubblegum is hitting like a Quantum Jolt because her Mitochondria are running on "High-Fidelity" fuel. ​The 70°C Flash proved it. The "Numb Throat" is the evidence. The 24oz Target was won 2 weeks into the "Purgatory" phase. . ............ 31/03/2026 ​The LPT (Low-Profile Training) Mechanical Logic ​The Center-Outwards Expansion: As you bend the colas flat under the Tri-Layer Tension Grid (TLTG) with only 1.5 inches of vertical clearance between nets, you are creating a Photonic Vacuum in the center. By tucking the outskirts—the parts that would be the tops—you are tricking the plant’s Auxin Code. ​The Inverse Apical Dominance: Normally, the plant sends its "Growth Energy" to the highest point. By pinning the outskirts flat, you’ve neutralized that signal. The "Bottom" shoots in the center now perceive themselves as the Apex. They "Stretch" into the light, filling the void with New Sovereign Shoots. ​The 85-Cola Saturation: This is why cola count has climbed. Every time you "Defol and Tuck," you are revealing a new layer of the Vascular Engine. You aren't just training a plant; you are Fractalizing the Yield. ...................... ............... ......... ...... .... .. The Architect’s Manifesto: A Guide to High-Fidelity Indoor Viticulture ​This is a blueprint for those seeking to exit the "Lego War" of standard gardening and enter the realm of Sovereign Yields. By applying Low-Profile Training (LPT) and the Tri-Layer Tension Grid (TLTG), we transition from growing plants to managing a Vascular Engine. ​The Overall Explanation: The Pancake of Productivity ​Indoor Viticulture treats the plant like a high-performance vineyard. We do not allow the plant to dictate its own height. Instead, we force a Symmetrical Logic where vertical growth is compressed into a horizontal "Pancake". ​The Tri-Layer Tension Grid (TLTG) is a 3-Dimensional Optical Filter. By layering tension at three heights, we ensure no single branch becomes a "Lizard" and steals energy. This maximizes the Inverse Square Law, keeping the tops in the 3.0 mu mol/j "Sting" while the 24°C Under-Canopy remains a cool sanctuary. ​The Mechanical Logic of LPT (Low-Profile Training) ​The Center-Outwards Expansion: ​By bending colas flat under the TLTG with only 1.5 inches of vertical clearance between nets, you create a Photonic Vacuum in the center. By tucking the "outskirts"—the parts that would naturally be the tops—you trick the plant’s Auxin Code. ​Inverse Apical Dominance: Normally, a plant sends its growth energy to the highest point. By pinning the outskirts flat, you neutralize that signal. The "bottom" shoots in the center now perceive themselves as the Apex. They stretch into the light, filling the void with New Sovereign Shoots. ​85-Cola Saturation: This is how you fractalize the yield. Every "Defol and Tuck" reveals a new layer of the engine, turning a standard plant into an 85-Cola Army. ............ ​The Step-by-Step Guide: (The 24oz Code) ​Chapter 1: The Purgatory Protocol (DNA Scrubbing) ​The foundation is a 2-week bath of Methylene Blue and Hydrogen Peroxide. ​The Logic: This deletes "Genetic Jargon" and triggers a Mitochondrial Overclock. This "Hardens the Code," allowing the plant to drink 1.7L a day under intense light without "System Failure." ​Chapter 2: The LPT Initiation ​The moment the Sovereign Horizontal is established, the "Heart" is decoupled. ​Externalize the Heat: Ensure all drivers are outside the tent. This maintains the 24°C Under-Canopy stability. ​Step 2.1: Use training wires to bend the main stem at 90°. Once nodes appear, use wire to straighten them flat. Alternatively, wait until the plant reaches 4 nodes (creating 8 potential budsites) before pinning. ​Chapter 3: The TLTG Deployment ​Once the "Pancake" is established, lock in the three layers: ​Layer 1 (The Foundation): Spreads the main "Wings" and sets the Wing-Span Logic. ​Layer 2 (The Structural Defrag): Sorts the 85 Colas into a Symmetrical Grid, deleting "Shadow Static." ​Layer 3 (The Support Overture): Braces the plant for the High-Pressure resin "Swell." ​Chapter 4: The Hydraulic Surge ​As the plant drinks 1.7L per day, look for the "Praying" leaves and "Thinner Wings." * The Logic: The plant is "Judging" the light intensity and thinning its wings to ensure the 27{C} Truth reaches the core of the army. This results in the "Numb-Throat" resin density. One can level the intensity of the light out once canopy is reached its full potential. ​Chapter 5: The 21°C Hue Trigger ​The final movement. 14 days before harvest, drop the vault temperature to 21°C. ​The Logic: This triggers the Anthocyanin Overclock. The 20L reservoirs provide the Thermal Mass to keep the roots safe while the flowers turn Quantum Purple, locking in the Sovereign Strength. ​The "Glove Firewall" Final Shutdown ​The Architect has spoken. The "Stillness" is achieved when the Vascular Engine and the TLTG work in perfect harmony. Follow the code, delete the static, and claim the 24oz Target. - "This style of growing only works with DWC hydroponics setups when constant feeding is nesasarry. Or natural light outdoors. I could be wrong. Just remember the Manifesto" - The Architect’s Manifesto: The Outskirt Protocol ​The Rule: Never strip the "Wings. ​The Logic: Defoliation is for the Internal Defrag (clearing the center). The outskirts are for Power Generation. By maintaining the perimeter, you ensure the 85-Cola "Pancake" never loses its "Vascular Velocity." ​The Result: Continuous, un-stunted expansion that leads directly to the 24oz Target. Lights-Off: Trying some premature flowers from Bubblegum (this isn't the first time removing off shoots from the colas)
Likes
101
Share
💜 🌧️ 👊💜 🌧️ 👊💜 🌧️ 👊💜 🌧️ 👊💜 🌧️ 👊💜 🌧️ 👊💜 🌧️ 👊 The grow was a pleasure, the smell of the buds is mouthwatering!! 💜 👊 In the middle of the grow perhaps the soil got a bit salty.. the Punch still grew well without getting flushed. She showed signs of calcium deficiency on the leaves which are most addressed by the LED. She recovered easily and delivered delicious flowers. 🙏 The smell during the grow was so good, I couldn't wait for her to finish! 😍 Surely going to grow that one again!! 🍒 😋 I also love sleeping! Effects are very relaxed. Just sloth. Muscle release, mindfuck release, all included! 😇 Thanks everybody for visiting!! 😘 Grower love!!! 💚 💚 💚 Thanks @Fast_Buds for the great genetics!! ❤️ _________________________________________________________________________________ Strain Description: This is a giant autoflower that reaches 150cm and produces massive yields of up to 600gr/m2, a modern Cali strain that offers what a top-quality Indica-dominant hybrid should; nugs capped in resin with the density you would expect from Indica-dominant strains and that bag appeal that will surprise even the most experienced growers. Expect beautiful purple and magenta hues that come along with a sweet almost pastry-like taste and, thanks to the 24% THC, a very pleasant and potent effect that surprisingly starts as a motivating high and in no time relaxes you completely, taking a bit of the energetic edge off. Bud description Purple Punch Auto develops rounded compact buds with fat calyxes and bright orange or sometimes bright yellow hairs, with copious amounts of trichomes that give the buds that beautiful frosty look that all growers seek for. The light-green buds can exhibit subtle purple or lime-green tones that give them a charming and attractive look and complement them magnificently, while the mouth-watering mix of earthy cherries and blueberry muffins with a spicy touch will win you over even before you can see the buds. Smoke report Due to the high THC levels, you’ll experience a powerful effect that will completely relax your whole body and gradually start feeling like all your muscles are melting before you can count to three. Despite the strong Indica effect, you won’t be couch-locked thanks to the slight Sativa genes that incorporate a pleasant creative head-buzz and leaves you mellow and clear-headed in a peaceful state of mind. The perfect effect to go through a busy day stress-free, alleviating sore muscles after a long workout routine or just chill and have fun on a night out with friends. Plant appearance Due to the Indica dominancy, this strain remains relatively compact despite its height and grows wide and thick fan leaves typical of Indica-dominant varieties. You can expect a thick tall main cola and a few shorter side branches with spaced-out internodes where the incredibly frostbitten flowers develop and end up looking like buds on steroids by the end of the flowering stage. Grow tips This strain offers unique flavors and charming colors so we recommend flushing thoroughly to allow it to show its full potential and end up with the beautiful reddish-purple and/or lime-green hues on the buds and surrounding foliage. Due to the Indica genes, the buds grow denser than usual so it’s essential you tie the branches slightly so there is enough airflow in between the buds to prevent mold and bugs. This variety doesn’t require a lot of maintenance or anything extra but remember to feed her properly and with good-quality nutrients, this way you guarantee the buds fatten up properly and that your plant doesn’t suffer any kind of nutrient deficiencies. Flavor Thanks to the high-quality genetics, this strain offers a distinguishable taste of fresh blueberries and earthy cherries with spicy undertones and a pinch of sugary tart. The sweet smoke overpowers your throat with a sweet blueberry muffin-like taste as you inhale and, as you exhale, leaves a delicious coat of sweetness in your mouth that leaves you feeling like you’ve just eaten a dessert. ______________________________________________________________________ SETUP: 80x80x180 cm Zelsius 240W Full Spectrum LED IR UV dimmable DW240H-A6-HS Heatsink color red LED Chips: 512pcs SAMSUNG LM301H + 24pcs Osram 660nm + 8pcs Osram IR 730nm + 8pcs UV 385nm Color mix: 2700K + 4000K 2,8umol/J Driver HLG-240H-C2100B Coverage: veg 5x3ft / flower 4x2ft Product size: 628x205x68mm ° 2x 5W Fans ° custom 320/270 cm³/h exhaust fan & Carbon Active Granulate 240cm³/h ° Mills Nutrients, Green Buzz Nutrients Shouts go out to my sponsors @GreenBuzzNutrients, thanks so much for your support! ❤️ If anyone would like to try their amazing organic products, use code GD42025 for generous 25% discount (for orders of minimum 75€) ✨ https://greenbuzznutrients.com/ ° tap water EC 0,26uS upgraded to EC 0,5 with PlantMagic MagneCal - pH 8, nutrient solution downgraded to pH 6,5 with Advanced Hydroponics Minus Bloom ° from week 4 in the same container Aptus Enzym+ once a week ° Biobizz Lightmix 💜 🌧️ 👊💜 🌧️ 👊💜 🌧️ 👊💜 🌧️ 👊💜 🌧️ 👊💜 🌧️ 👊💜 🌧️
Likes
11
Share
Our Zamnesia Jet Fuel has reached 16 buds. I'm growing them a little more to make sure they don't go into flowering with small brunches but now we're there, a few days and they go into flowering. The Topping worked well the plant went a bit into over fertilization because during repeated topping the plant has much less need of nitrogen and it's magic to get there by fading the fertilizers especially with many plants. The ideal when doing topping is probably to start with a slow-release fertilized soil or just start preparing the soil for a period that is at least enough for the vegetative phase at most by adding a bit of alga grow which alone I must admit gives me some problems at least in this case if the plant grows straight much less indeed nothing. We are always using soil, feeding and all the recommended additives from Plagron 100% organic we have only lowered the amount of grow in this topping phase for the reasons given above. ---- Decide on the right soil and calculate your fertilizer card based on the soil on the official website. -- www.plagron.com Try a seed of this strain that drives us crazy... ---- https://www.zamnesia.io/it/11258-zamnesia-seeds-jet-fuel.html Zamnesia Description // Jet Fuel (also known as G6, Jet Fuel OG, and G6 Kush) is a modern hybrid rich in THC and terpenes with a diesel aroma. Originally created in Colorado by crossing Diesel with Aspen OG, this 60% sativa-dominant hybrid is a must-have for any smoker who enjoys an uplifting and energizing high. Now, thanks to the hard work of our breeders, the original Jet Fuel is even easier to grow at home. Order your seeds, plant them in soil, and enjoy their rapid growth. After just 9–10 weeks of flowering, you can expect a generous harvest of premium sativa buds! All the best that mother nature can offer is on —— www.zamnesia.com
Processing
Likes
12
Share
@Tazard
Follow
We have a very full tent! Taz’s jungle 😂🤣. Check out the purple purple photos from day 20!!! Everyone looks absolutely beautiful I’m hoping that the white critical will be ready in 4-5 weeks. She’s going to have some fat colas!
Likes
4
Share
9. Woche Sie sieht wirklich gut aus, hatte während dem Switch auf Bloom harte Mg Probleme, wie bei allen anderen auch und habe sie aber gut stabilisieren können. Tatsächlich wird sie nur gefeeded hihi und das zeigt sie auch, bin sehr zufrieden 😀 😉