Likes
Comments
Share
@LST420
Follow
Week 3 I've been feeding the plants some extra CalMag because the Auto Night Queen appears to have a deficiency. And I started with LST. Day 21 I accidently partially snapped the main shoot of the OGK while bending it for LST. I immediately provided emergency first aid by putting small pieces of duct tape around the spliced area. If sufficient area is still connected it might heal. I'm also spraying it multiple times with a solution of Biotabs Boom Boom spray and Canna Rhizotonic. 🙏
Likes
40
Share
Ok these girls are finishing up and I have been using clean water for a little over a week now I'm using flawless finish for the last 7 days.i have one girl that is definetly done but I'm letting her flush a little longer to make sure I have a clean smoke.i did use water and fish shit for a couple waterings but I don't think that will affect anything with taste.if anything I hope it makes it better.my last harvest is still kinda harsh and more of a black ash still.i started using my burp jars today so hopefully that will help.i just over did it with nutrients.even though they are organic they still need a good flush.im going back to advanced nutrients to see if that helps
Likes
38
Share
Final week before flower, and I took out the smallest plant as I knew I needed space for a dehumidifier. It was a good choice to in the end.
Likes
16
Share
Day 27 Flowering:. I am in love with Pog. she always looks so edible.lpl. her buds are such a nice fluffy inviting example of this respected strain from Barneys Farm. So so fruity smelling when rubbed and makes me hungry without even smoking.lpl With less than halfway passed , she will be a good yielder by the looks of her now. roll on sweet harvest time.
Likes
17
Share
Likes
39
Share
@SamDo
Follow
Slt, déjà la fin de la semaine 5. Les plantes ont très bien récupérées de leur topping et de leur défoliation. Les plantes semblent être en bonne santé. Je viens juste de refaire une défoliation et du LST, pour avoir la structure voulu et donner toute l’énergie de la plante pour les tiges principales, en espérant que cela soit profitable aux plantes. J’espère ne pas m’être trompé.🙏 En photos et vidéos je montre avant et après la défoliation et le LST, et le fonctionnement du sytème d’irrigation. A la semaine prochaine... Happy grow😎 Ps: le rendu des couleurs sur les vidéos et photos peu être bizarre à cause de la LED.
Likes
15
Share
@Hawaiian
Follow
Any advice will be greatly appreciated
Likes
3
Share
Good evening to all growers !! It starts to make a certain smell that is now clearly perceived even outside the growroom... So from next week we will attach the filter you have activated carbon ;D
Likes
2
Share
Flowering in full swing. Let her rip. Water when dry.
Likes
18
Share
Gestern Abend angefangen vor zu trimmen. Ein viertel geschafft, später mehr.. 03.03. Fertig vorgetrimmt und aufgehängt zum Trocknen. In 3 bis 4 Tagen wird manikürt.
Likes
3
Share
Smell got more intensive and Ladies are more thirsty At day 8 of flowering we thought the plants are a bit too small so we gave them more space to the LED, about 70cm with 200watts Also they got 4ml/l of bioheaven
Likes
39
Share
Dear Friends ❤️ in this week we topped again and bended this unique Black Harlequin by Sensi Seeds. I topped the plant and remove big fan leaves that covered bud sites I missed to give top crop Big one at 14 october, it is important to give 10 days before flowering The last day of this week we switched the light to 12/12 week #5 of vegetation The 240w light is working at 50% power and now it is combined with the 480w quantum board. I consider week 4 the week from 18/10 to 24/10. day to day fert schedule: 📅 18/10 📅 19/10 NEEM OIL 📅 20/10 📅 21/10 Top Veg 3ml/L-Deeper Underground 2ml/L - Green Explosion 2ml/L - big one 2ml/L - PURPINATOR 1,2ml/L 📅 22/10 📅 23/10 📅 24/10 Hola friends! we are here to present a super strain called Black Harlequin from Sensi Seeds. We choosed this strain because it has a wonderful THC:CBD ratio and it will guarantee an excellent yield with a lot of super tasty buds. About Black Harlequin Feminized Black Harlequin Feminized is an indica / sativa hybrid. Its formidable genetic pool includes our own Black Domina, a Cannabis Cup-winner; and Harlequin, a strong CBD strain from the USA. Growers can anticipate huge yields from their plants, and a scent that’s floral, woody and earthy. They have a THC / CBD ratio of 1:1, and offer consumers a high that’s wonderfully relaxing for the body and mind, with plenty of balance. This special strain began life as one of our 2019 Sensi Seeds Research varieties. Despite initial plans to only add three of them to our permanent catalogue, this one received such great feedback from our community that we decided to include it too. Growth pattern of Black Harlequin Feminized Black Harlequin Feminized cannabis seeds are an indica / sativa hybrid. Its genetic pool features Sensi Seeds’ Black Domina, a Cannabis Cup winner; and Harlequin, a respected CBD strain from the USA. This strain is feminized, which is useful for growers who don’t want to have to identify and remove male plants. It makes cultivation easier for novices, and anyone desiring a simple-to-grow variety. The plants have an average flowering period, so there isn’t too long to wait until harvest time. Black Harlequin Feminized’s plants are usually average in height, both indoors and outside. They’re also capable of producing phenomenally large yields, especially in the hands of a grower with good cultivation skills. In appearance, the plants are fairly bushy with a thick central cola. They’re also covered in plentiful compact buds. The strain can be grown successfully in both temperate and continental climates, and also does very well when cultivated indoors, at any time of the year. Effect, taste, and smell of Black Harlequin Feminized Black Harlequin Feminized is an indica / sativa hybrid, with a THC / CBD ratio of 1:1. This high CBD content is noticeable in the effect, and the influence of the parent plants can be detected in the aroma and taste. After consumption, users often report a welcome sense of relaxation, both of the body and mind. Thanks to the CBD levels, it’s also balanced and relatively gentle. While the plants are growing, they produce an aroma that’s woody, earthy and slightly floral. These notes all become more apparent during the flowering stage, and the bud-curing process. In terms of flavour, users can expect to pick up on the pungent earthiness of the strain, with a delicate hint of sweet flowers and exotic wood. In a nutshell • The plants grow to average heights, both indoors and outside • The strain can be grown indoors, and outdoors in temperate and continental climates • The scent and flavour of the buds are woody and earthy, with a hint of floral lightness • The THC / CBD ratio is 1:1, thanks to the introduction of a CBD strain to the genetic pool • This strain is feminized, which makes cultivation easier for beginners • The high is pleasantly relaxing, without being too overpowering 💸💸💸💸💸Buy BLACK HARLEQUIN: hhttps://sensiseeds.com/en/feminized-seeds/sensi-seeds/black-harlequin-feminized 🔧💡WHAT WE ARE USING💡🔧 -LIGHTS: 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B temperature: 3000k Heat dissipator board: No Noise: 0dB 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B temperature: 3500k Heat dissipator board: YES 15MM Noise: 0dB -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Power: 42-50W RPM: 1940-2620 minimum -1 Maximum air flow: 430-560 m³ / h Sound pressure level at 3 m: 32-44 dBA -FANS: A)OSCILLATING FAN Maximum consumption: 20 W Minimum consumption: 17 W Fan diameter: 15 cm Housing diameter: 20 cm Height with handle: 35 cm 2100 revolutions per minute Two speeds B) COMPUTER FAN Sunon DP200A - 230V Nominal power: 22/21 Watt Noise level: 44 / 49dB (A) Rated speed: 2700/3100 RPM ± 10% Air delivery: 95/115 CFM C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h, can be used in medium-sized rooms. High silence and reliability make it adaptable and versatile. Technical details: Rotation range of 90 degrees Tilt adjustment Three speeds of rotation Suitable for wall and ceiling suspension Power Consumption: 35 Watts Air Flow: Approx. 740 mc / h Operating noise: approx. 39 db Diameter: 20 cm Voltage: 220-240V Frequency: 50Hz Dimensions: L 28 x D 16 x H 28 cm 💊💉💊FERTILIZERS: MAIN FERTILIZER BRAND: TOP CROP I use these products: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ ❤️ THANK YOU FOR BEING HERE ❤️ Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾
Processing
Likes
18
Share
@eezeegrow
Follow
These two small seeds are doing a great job! Nice strain Dinafem! 👍
Likes
5
Share
@Ensign420
Follow
Greetings fellow growers 🖖 and welcome to my first grow ever. This adventure actually started several months ago when I decided to stop buying flower from dispensaries and just grow my own bud. How hard can it be!? This is actually my second seed of this strain. The first bean sadly died due to over watering (sorry girl, RIP). I was literally watering the cube to the point where water was dripping from the bottom, then heavily sprayed the humidity dome and tray with the vents completely closed. Everyday. Multiple times. I never let the dome or try dry out. So after about 8 days of not sprouting, there was a funky smell of rot. So that was that. Later I learned that rockwool retains a lot of water and can easily drown seeds. So a wet/dry cycle is best for rockwool germination. So even after hours of researching and digging through forums and tutorial videos, I was still under prepared for this journey. Did not consider how delicate the germination phase is. Oh well. Lesson learned. Reset and try again! I hope everyone is safe and stoned during this corona crisis. Just like everyone else in the world, I want this pandemic to be over with. But in the meantime, let's grow some weed! 🖖 [START OF WEEK 01] Day 01 - Monday - 08/03/20 - Total Days: 001 ----------------------------------- - [0830]: Light Schedule: 24Hrs/0 --- Soaked cube in 5.5 PH water for 10 min. Did not shake water out. --- NO NUTES! Only PH'd down to control the PH levels. --- Did not use the default hole (way too deep). --- Flipped cube upside down and made a shallow hole for the seed (less than 0.25" deep). --- Placed seed in and pinched hole close. No additional water added. --- Sprayed the tray and dome with straight water (5.5 PH). --- Vents are cracked opened a for ventilation (about 1/4 opened each). --- Distance between the light and tray was 53" --- AC was set to 80 °F --- Exhaust fan was set to 86 °F --- Room average temp was at 85 °F --- Dome humidity was at 85-99% when sprayed. --- Allowing to completely dry before respraying. - [2200]: Dome and tray were completely dry! Sprayed only tray and dome with more water. Day 02 - Tuesday - 08/04/20 - Total Days: 002 ----------------------------------- - [0845]: Sprayed dome and tray in the morning. Everything was dry. --- Hoping for the best! - [2130]: Everything was dry again, so sprayed dome and tray at night along with a light spray on the cube. Day 03 - Wednesday - 08/05/20 - Total Days: 003 ----------------------------------- - [0830]: Everything was dry again. Resprayed dome and tray. Slightly sprayed cube. - [2125]: Hooo damn!! She popped! Am little stub is visible! Resprayed dome and tray again. --- Still going 24/0 for lights. - [+0033]: Just checked up on her and I swear she grew a bit taller! Getting excited! Day 04 - Thursday - 08/06/20 - Total Days: 004 ----------------------------------- - [0845]: Wow! Went from a little stub to fully sprouted overnight! Everything was pretty dry again so resprayed dome and tray. - [2200]: Tap root is visible! Over 1" long too! Just resprayed dome and tray again. -- Going to prep for hydroton transplant tomorrow! Day 05 - Friday - 08/07/20 - Total Days: 005 ----------------------------------- - [0930]: She keeps growing! -- Added a bit of CalMag to the spray bottle (8 drops to 650ml of distilled water). Resprayed dome and tray. Water was at a 5.4 PH with 141 PPM. - [1045]: Prepped the bubble bucket with 4.5gal of water. Water is high enough to reach about 0.25" above the bottom of the net pot. --- Added 3 drops of Superthrive --- Added 3.5ml of CaliMagic --- Added 2ml Hydroguard --- Then PH'd down to 5.6 --- Solution Strengh: 120 PPM --- Water chiller is set to 20 °C - [1100]: Transplant time! --- Filled the net basket 1/3 with hydroton. When placed in the bucket, air bubbles are not visible, but are slightly below the surface (slight digging will reveal the water/bubbles below). --- Removed plastic on rockwool cube and placed in basket, then filled around and covered with hydroton. Making sure to block any light from passing through the net pot and into the nutrient solution. --- Covered with a half-bottle dome sprayed with the CalMag water from earlier. --- Hoping for the best! - [1300]: Raised Bucket 5" higher. Now light distance is 48" to top of bucket. - [1820]: Lowered tent exhaust temp to 76 °F --- Lowered AC to 75 °F --- Raised bucket even higher so light distance is 30" to top of bucket. - [2300]: Looking good! --- Sprayed dome and surrounding hydroton with more CalMag water. --- Attached timer to light! So new 18 Hrs On/6 Hrs Off light schedule. --- Lights On: [1600] (4pm) --- Lights Off: [+1000] (10am the next day) --- Decided to go with lights on during the evening/night and off during the later mornings/afternoon (the hottest part of the day) to see if temps can be controlled better. --- Please survive girl! Day 06 - Saturday - 08/08/20 - Total Days: 006 ----------------------------------- - [0800]: Everything was dry. Resprayed hydroton and dome. - [2000]: Here first night cycle seemed to go well! Get'n taller! --- Dry again. Removed the dome. --- PH went up to 6.5 so PH'd down to 5.7 --- Ran the top feed drip ring for a bout a minute to wet the hydroton and rockwool with the nutient solution. ---Too scared to leave the top feed on 24hrs (I don't want over water her and cause dampening-off). Will let dry before re-watering. - [2100]: After closer inspection, I think she's looking a bit yellow. --- Decided to add a bit of grow nutes to the bubbler solution. --- Added 2ml of Sensi Grow A --- Added 2ml of Sensi Grow B --- Solution strength after adding more nutes: 176 PPM --- PH went up to 6 --- I hope that the extra chelating properties of the 'PH Perfect' solution is enough of a buffer for proper nutrient uptake. Day 07 - Sunday - 08/09/20 - Total Days: 007 ----------------------------------- - [0800]: Water dropped a bit (mostly due to evaporation) so solution strength was at 190. --- Checked PH again. Was still at 6, so PH'd down to 5.4 --- Ran the top feed for a minute to wet the hydroton a bit. - [0915]: Since she's looking perky but still a bit yellow. So decided to up the nutrient concentration even more before lights out. --- Added 2ml more of Sensi Grow A --- Added 2ml more of Sensi Grow B --- Solution strength after adding more nutes: 199 PPM --- PH went up to 5.8 - [1700]: Checked nutrients. --- PH: 5.9 --- Solution strength: 202 PPM --- Added 4ml of Voodoo Juice --- Added 4ml of B-52 --- PH after adding more nutes: 5.9 --- Solution strength after adding more nutes: 238 PPM - [2130]: Decided to make a new foliar spray to address the continued yellowing. --- Started with 500ml of distilled water. --- Added 3 drops of CaliMagic --- Added 3 drops of Sensi Grow A --- Added 3 drops of Sensi Grow B --- Added 3 drops of B-52 --- Added 1 drop of Superthrive --- Solution strength: 164 PPM --- PH was at 5.9 and did not adjust. --- Gave her one spray. --- Also sprayed the surrounding hydroton. [END OF WEEK 01]
Processing
Likes
6
Share
Third week we can say that the overtert has been solved. Vegetative growth is in full swing. G4 has recovered but is apparently 1 week late than the other 3 we will see next week.
Likes
14
Share
Very easy plant to harvest, didn't have too much leaves, so very easy to take out fan leaves and prepare to dry.
Likes
38
Share
Day42 of flowering Girl #1 seems to have tighter buds and is still smaller, but looks like she will finish later (although she popped first by a few days) Girl#2 is much heavier and has sucked the green from her lowest fan leaves even though she is fed well. She also smells soooo good, over ripe cantaloupe/melons. I am really happy with these plants, which I did not top and let colas grow. I am thinking of removing the cola fan leaves to let light blast the other tops. Day 45, Removed almost all fan leaves to expose as much bud as possible to lighting. Scent is very strong and sweet. Very resinous leaf
Likes
68
Share
@Fatnastyz
Follow
Week 2 11-14 Day 8 Roots showing and water day Slight water, xplant to final tomorrow! 11-15 Transplant day! Went like a champ! ok so I thought I was gonna water feed, but opted out of it. If I over feed, with 7tbs. so this time I only added 4. I'll just read em as I go. I was about to make stuff tuff. so 4 tbs Craft blend, 1/2 cupish worm poo, hp connect in hole. just barely wet the hole, enough to hold the sides. watered in with around 8oz or so. yucca, humic. 6.2 11-16 Looks happy when I woke up. 11-17 She grew a little more than yesterday. 11-18 Water, recharge, cal/mag, yucca and drops of balance.
Likes
26
Share
@MG2009
Follow
02/01/2021 Going to sprout my last 2 Bluedreamatic seeds from (fast buds). Will be sprouting in mini greenhouse on heat mat. Once seedlings are ready they will be moved under 1000w MH for veg and flowering. 10+hours later they are on bottom of water and time for paper towels in baggie. 02/03/2021 1 seed sprouted and I dropped the other in soil 🙏 I hope because it disappeared! So got at least one Bluedreamatic on the way hoping to see other one sprout in mixing tray. 02/05/2021 She's above ground! Day #1 , currently under 150w compact flourecent 3 way bulb when first true leaves form (Not single finger let)I will start veg cycle under 1000w MH see you in 3-4 days for weekly update. topped seedling pot with vermiculite 1/2-3/4 inches leaving the cotdtyledons 1/2-3/4 inches above surface. Roots should fill up this container quickly, moved under1000w MH light for vegging. Seedling is 3-4 ft away from light but also off to the side no serious heat just about room temperature. I could not feel heat from light where I put seedling, comfortable on your skin is good for plants. 02/11/2021 It's day #6 above the soil, she is doing well already grown 2" above where I topped with vermiculite. At lights out I put her in humidity dome with my tomato seedlings main area of grow gets very cool at night,so I try to keep her at a better temp 72°f.