Processing
Likes
Comments
Share
@
Follow
Likes
11
Share
Likes
14
Share
@AndrewC
Follow
So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.
Likes
66
Share
Finished the last week of flushing WOO! and its harvest time! I put them in 48 hours of darkness on Wednesday ready to crop for saturday, I will do a proper harvest report next week when I have them ready to go into curing jars along with some pictures and a full report, but I will add this some of the smells I was getting whilst trimming where unreal smells like pine, citrus, beef and a really faint sweet smell I cant put my finger on... I'm not saying that's 100% what it smells like but it smells similar to wild garlic. Well these b*tches took 14 long hours( could of done it quicker but we made a day of it ) all bud is trimmed and primed for drying then curing. Happy Growing 👊👍
Likes
2
Share
@fabialien
Follow
semana del 21 de Febrero al 28 de febrero 2026.
Likes
2
Share
Plants growing slowly, having a problem with mold and I went and got hydrogen peroxide and that seems to control the area of it when sprayed.
Likes
4
Share
@Nistnov
Follow
Had no time for the harvest so i took the risk and let her grow, under a rain cover. Im surprised that i didnt spot any bud rot! Removed fan leaves for better airflow. The weather makes it hard for her to fatten up, so i will give her one more week to finish up. Shes super frosty and has such an amazing smell. I did harvest 3 small branches that are drying and curing right now, looking forward to the smoke test.
Processing
Likes
21
Share
This week I Realised I'd used the wrong feed chart so I was over feeding 🙄 the leaves burnt on a few plants so I've only fed them water this week and will resume feeding from next week. There are still no pre sex pistils showing but it can't be far off now. As soon as pistils start to show I'll start feeding bloom feed. I've turned the light up to 30000lux using HLG's online calculator for converting a lux meter/app reading to PAR , my light is 3000k which with lm301H Led's works out @ 465ppfd which is about the max the plants can use in veg without supliments co2. Here's the link for anyone using quantum boards, it has different spectrum calculators. It's been really useful setting my light up so big thank you to HLG (even though I have a Geeklight) and a thank you to the GML show on YouTube for bringing it to growers attention (I love that weekly show, so much info and perspective) https://horticulturelightinggroup.com/blogs/calculators/converting-lux-to-ppfd Hope everyone's staying safe and growing 😎
Likes
6
Share
She seems to be recovering from the water log roots…after she dries out I will feed her some fish fertilizer…in case this is a nitrogen issue.
Likes
12
Share
This girl is speeding toward the finish line. Except for the very tops of the buds most of the pistils are still white so i haven't bothered looking closely at the trichs yet. Will be aiming for a 1 week flush with ph adjusted water. Such a low maintenance girl. Have been feeding with same regimen as my other girl and she's not been causing me any concern.
Likes
26
Share
@darb35
Follow
Day 43 - 1.3L water with half dose according to biobizz schedule + extra calmag (ph 6.3)(84 cm) Day 44 - 1L water with calmag (ph 6.4)(86 cm) Day 45 - 1L water with half dose according to biobizz schedule (ph 6.3)(88 cm) Day 46 - 1L water with calmag (ph 6.4)(88 cm) Day 47 - 1L water with half dose according to biobizz schedule, trimmed some lower branches, hope they finished growing in height (ph 6.3)(89 cm) Day 48 - 1L water with calmag (ph 6.5)(90 cm) Day 49 - 1L water with half dose according to biobizz schedule (ph 6.3)(91 cm) They don't have much more space to grow into, 30 cm from the lamp / tent's roof. Hopefully they are at the end of their stretch, might even give one away to make space inside the tent.
Likes
12
Share
Growing and getting fat!!! 💐💐💐
Likes
3
Share
8/9/25 This is a gorgeous plant. Lavender purple buds with long thin bud structure and long spikey pistils shooting up everywhere. She started looking a little hungry so I tossed in some dr earth 396 8/14/25 Pistils are starting to change and she's producing a strong fruity stank too her with a back end funky smell. While working with the other plants I could smell her over and over again. Applied some cal mag in the form of uprising foundation. And will continue to add microbe charge Still tweaking the auto water set up. Trying to keep it between soaked and only partially watered. Maybe it's the drip heads
Likes
54
Share
@ASCBOOGS
Follow
Still have not topped don't know wether I should or not but still doing LST and HST
Likes
4
Share
The Lemon Orange has a crazy mutation. She topped herself and the leaves are growing strange from the main stem. The Top gets Fluffy like it has topped itself multiple times. Unfortunately, during my absence, the ladies were under-watered and could’ve used a bit of nutrients as well. I’m optimistic they’ll bounce back and recover. I topped and defoliated them. Light is hitting the leaves with around 500 PPFD.
Likes
6
Share
@IQuSX
Follow
Hi, Topman! Now, I think, was added very more nutrients ~1500ppm, and this movie does this situation. Also added simple of sugar for Great White! We does add solution 35%…and watch form plats everyday. It's strain doesn’t like +1200ppm… Think it.
Likes
6
Share
So I'm hoping that were all done stretching because I'm all out of room to raise my light! Lol These ladies are huge! I'm so friggin stoked for these two, I cannot wait to see more flower production. I increased the nutrients for transition and everything is looking lovely except for some minor calcium deficiency showing on some of the bottom leaves. Next feed I'll add 5ml of cal mag to the mix and see if that helps. It has started to go away little by little since the last feed because the nutrient solution dies gave some cal mag in it but I guess just not enough for this big bitch lol. Until next week.
Likes
19
Share
@PPFDaddy
Follow
Hey everyone! Another week has flown by for the Stickies, and as usual they haven't slowed down one bit. Flowering sites are multiplying nicely across all plants. Two of them haven't developed the thickest stems yet, but it's still early days and plenty of time to see how things evolve. On the feeding side, I raised the EC by another 0.1, as runoff EC was consistently coming in below input. Plants are handling it perfectly. The box has a clear boss this week. Despite topping, LST and even super cropping on some of the main stems to keep her in check, she's hit the 1 meter mark and shows no intention of stopping, making the canopy uneven. She's being watched very closely. VPD keeps dropping as the dense canopy pushes humidity beyond what the current dehumidifier can handle. If it stays consistently above 65%, I'll be adding a second unit for the final weeks of flower to ensure tight, dense and resinous buds at harvest. First pistils appeared over the last couple of days. Bud formation is officially underway and I'll be supporting it with Big Bud. I love this hobby. At this point it's a full-blown passion, bordering on obsession. Happy growing everyone! 🙌
Likes
19
Share
I used this supplement 4th time. All was good but we need use 150-200% of recommended dose as i sad for better results. So the day 71 was harvest day) the buds really frosted and dense.. . Thanks "fastbuds" for good marijuana genetics... they did good work. Thanks guys for this. During season I hadn't any serious problem. Thank for all followers and friends who watched my grow and I wish you all have a good harvest brothers! When buds will be treated I add results) see you later;) Hi friends!) So 7 days took for drying buds. And we have not bad results -255 grams dry buds from two plants. 130.5 from one and 124.5 from another. Good quality and taste. I put them in my fridg for next 4 weeks for treating) so see you soon in my next grow;)
Likes
5
Share
Day 19. Topped at day 15. Stunned for a day or 2 but all good.