Due to prolonged bad weather, I decided to harvest them to avoid mold and other damage. There were three of us, and it took around 6 hours to trim about 80% of both plants. I ended up with a yield of 205 grams dry per plant. I'm more than satisfied with the plants. For my first grow, I couldn't be happier.

Really starting to have a distinct aroma :)

🎩🌈🍬⛽️💎🏁✂️

As I stated I wasnt that impressed early in the grow. However the wait was worth it. Didnt really smell until the last 2 weeks. Lots of crystals and very nice fruity taste. Nice strong body hit from this one.

Harvest time has come. It was an excellent cycle without any problems, in fact the plants were doing great and produced some beautiful buds. Now I will dry for 2 weeks plus cure for 1 month.

Hi all A great week for flower production this week. Temps have been on the high side but within a copable range for growing these ladies. Bruce Banner continues to show the many bud sites getting fatter and her mains are forming together well too. She is a smaller overall height to the other strains so I have boosted her a little higher to get the best light positioning for her. She has a lot of secondary growth that looks promising too. No issues with any deficiencies or leaf colours Candy rain is still catching up with her node distancing but with at least 4 weeks left , there is time. Jealousy #1 and #2 are fattening up nicely on their long thick stems and look amazing already. They have not skipped a beat the entire grow so far. I am more than happy with progress so far and can see a potentially beautiful harvest of summer fruit strains to sit amd ponder in the sunshine with. There are signs on a couple of buds that they are starting to mature the initial pistil sets with a nice golden appearance. Not to a point of being close at all bit will lead to a pistil flush which should help them to start packing weight on for the final leg. So there it is for this week's update. all good and smelling so sweet in the room now. Until.next time. Be healthy and well

Day 78 - I swear the Orchid is getting skunkier by the day. First thing I smell when opening the tent. Added some pics with a selfie seeds sticker to show the size None of the strains here are Selfie Seeds, sticker was used for showing the bud size. Day 81 - I'm so ready to smoke these plants. The Apple Banana Zoap smells just like the flower I ordered from LIT and it's sticky as hell so I know they're going to be fire even though they hermed. I removed a couple more nanners found lower on the branches that I couldn't see for ABZ#2, NO MORE found on ABZ#1 as of now... Checked PPFD again today: ABZ #1 - 810 PPFD | ABZ #2 - 875 PPFD | Biscotti - 750 PPFD | Black Orchid - 1040 PPFD Day 82 - Used the jewelers loupe and camera to compare for trichome quality against the microscope Day 83 - Noticing reduction in feeding consumption all around. ABZ 1: 0.9L | ABZ 2: 1.5L | Biscotti: 1L | Black Orchid: 2.0L Biscotti is giving a vanilla and lemon terp profile with the pine spice in the background now. It's nice tbh Day 84 - This is the last day of week 7 since flip, week 8 starts Tomorrow. I'll be dialing back my light a bit and the ppm. Pulled the ppm back a bit tonight as I've still seen issues with the nitrogen. Feed tonight was 926PPM. Might have a new nutrient mix to use on them Wednesday.... I can't get better pics with the microscope sorry, I'm too unsteady for that. (Maybe cause I turned the LED down on the microscope)

So you've grown a normal seed? so you've grown and autoflower? well why don't you try the fast streams definitely one of the most interesting and exciting grow experiences I have been a part of up-to-date. One of the most notable traits was the branches being extremely susceptible to bending making it a truly ideal strain for a SCROG. I think one of my main mistakes was leaving the plants in a 3 gallon pot I would suggest that nothing less than a 5 gallon pot should be used and from what I have seen going from jiffy transplanting into a Solo cup then solo cup straight into a 5 gallon pot has worked much better for the clone run I'm doing now. These plants need support!!! That is a must! Especially if you are going to use defoliation at any point you're gonna see a mass of spurt of growth. Now another thing I noticed is that the end right towards your finish window where your trichome are going from clear to Cloudy They tend to mature a little bit faster than a normal photo sensitive Strain. On the feedings I would do at the end 75 to 80% of the recommended maximum nutrient mixture you are using meaning use a little bit less the nutrients for the green crack. Expect A flowering stretch of at least 75%. Other than that I'm extremely impressed with the genetics again that humbled seed organization has created for us cannabis lovers to Excite and motivate us to have something different.

Not too sure why the blackberry is so small but I think I stressed it out too much with the LST

Week 4 veg in a 4L pot looking nice and bushy another couple of weeks then they getting their ass transplanted in bigger pots. The Topping and LST tranning working pretty well i see 😉It allows the lower heads to raise up and benifit from the light exposure.

Start of week 5. Week 4 went well and like the OG Kush, the leaves dropped overnight from day 6 into 7 of week 4. She's a bit hungrier and will need a bit extra feed. Overall the plant is looking good, bud sites are filling in and she's starting to smell. She's already incredibly sticky!

Gut in Blüte angekommen, sehr klebrig und Geruchs intensiv.

Harvested Around 220 Grams from 3 Plants, terps were there slightly, smoked fine, its alright, went with a differnent breeder after.

almost ready to cut 🤤🌱 Day 76 1-2 days and proceed with the harvest I am aspetrating that the soil dries up well. we'll see when they give us these little girls of fustbuds

She’s starting to look like “real” cannabis lol Buds are much nicer and fragrant. Some tops smells like candy, some of them smells like pastry and coffee. Weird but good!

ALL THESE PHOTOPERIODS WILL GO IN THE 8X8 TENT ONCE THE AUTOFLOWERS ARE CHOPPED AND I WILL SWITCH THE LIGHT TO FLOWER THEM IN THERE FOR MORE ROOM FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Plantas sanitas. 3era semana de flora.

Looking really happy and healthy

Ladies and gentlemen ... Welcome to the prairies of Queen Peakyplanters. An enchanted Weed valley where the maximum is always giving to improve the daily life of our girls. Our three WEDDING GLUE grow very different from one another and their structural height and much shorter than the cousins that are next to therefore they did not bring many lower ramifications above the network. Anyway ... the apical top of the front plant is becoming huge! Happy and abundant harvestings to all