During the first period of flowering they seemed a little bit slowed down..Now they're starting to swell pretty good! :D Atami products work very well!

Finishing out week 5 of flower and continuing my daily treatment for PM. Using Athena Mildew Control, an organic reactive treatment spray that you can use on the entire plant up to harvest. Realizing PM is systemic and is like herpes...it never goes away! All you can do is spot treat on a daily basis, the outward symptom of PM, which is the white patches/spots. Treating primarily Mimosa, but also parts of the Bling as well. Napali Pink - As usual, is impervious to this type of PM and is thriving, with huge fat buds that still continue to get fatter and tighter by the day. They haven't even fully swollen up yet either. If the smoke is great, which I am sure it will be, this is a strain that I highly recommend growing. It has excellent branching structure with upward growth with very little help. Takes nutrients well and not too fussy or needy with any of variations of NPK or micros. I would say based on the looks of the buds and trichs, she will be a last to finish, but well worth the wait, as I have so. Many. Fat. Ass. Buds!! Mimosa - such an amazing daytime strain that I would loove to always keep on hand, as this strain is on of my All Time Favorites! However, with such prized buds and terp profile, she is vulnerable to PM. She has had it the worst, and always continue to spot treat it daily. She is gaining this cool hue of purple along the outer edges of the leaves, as well as what I thought was PM, but surprisingly turned out to be a shit ton of trichs! Buds are fattening up nicely and think she will be the 2nd to finish out of the bunch. If I could grow her again, I will, but will be sure and do a preventative treatment for PM during her entire life cycle. The Bling - she has been a trip growing, as she is very viney and lanky, but her branches firm up nice and strong. Practiced some Kushman Chiropractic on some of the stems with success. Had to spot spray, but not as bad as Mimosa's PM. Since I defoliated all leaves covering bud sites, along with huge fans, the buds have actually grown in height and girth! This one never ceases to amaze as she has come back from a bad HST. She is so heavy with trichs, it looks like it snowed on the buds. I am hoping to get a good yield but between the three ladies, she will come in last for that. Used bamboo stakes to secure all branches/bud heads; used zip tie and paracord to secure to bamboo. Now every single bud gets light! Also testing out a Diminishing Light Schedule and now down to 11 hrs of daylight this week. Will continue to reduce by 1/2 hr each week until I hit 9 hrs of daylight. I will hold at that. Otherwise, patiently waiting for harvest!

the plant has built an incredibly strong trunk that with great difficulty you can even shake the plant a little.The cold prevails unfortunately but the plant seems to cope with it and produ flowers

Tag 20: Alle 4 Pflanzen zeigen eine Vorblüte und sind dann schon in der Blüte. Tag 25: Aus Platzgründen musste ich 2 Pflanzen aussortieren. Habe mich für die beiden kräftigsten und gleichmäßigen entschieden.

Week 8 - Flower Week 4 Lemon Jeffrey by IRIE Genetics (14 Starts for 8 Finishers) 63-70 Days Flower (9 - 10 Weeks) Seeds Wet: Monday 14 May 2023 Harvest Date Range: [ 2023-08-11, 2024-08-21] Weeks Observations - Local weather conditions have been unseasonably HIGH Humidity. First time in 3 years am unable to reduce to standard levels. Dehumidifier being installed today. - Today is the 21st day since flip - we’ve experienced bolt since week 1, up to 5” in a day Start of week: - Dates: [2023-07-10: LJ2Q 57:F:4:1, 2023-07-16: LJ2Q 63:F:4:7 ] End of Week: - Plant Height Range: [ 30, 44, in] - Water/Day/Plant: [ 720, ml] EnvironmentalCurrent: - Scotoperiod: [ 12, hrs] # 1900 - 0700 + 24 - LightIntensityPeak: [ 975, µMol/m2/s ] - DailyLightIntegral: [ 42.1, Mol/m2] # Target: < [ 40, Mol/m2/day] - LightDistance: [ 12, in] # Despite SuperCropping (Bending & Twisting), we’re wishing 12” of the Light at End of week - TempAvg: [ 77.5, °F] - RH: [ 66.9, %] - VPD: [ 0.85, kPa] # Achieved Ideal ‘Early’ - need to bump to 1.05 to 1.1 - FeedwaterPerPlantPerDay: [ 720, ml] - FeedwaterPerDayTotal: [ 5760, ml] # 1.5 Gal/Day - EC: [ 2.0, mS] Environment NOTES: - Because room temperature overnight is 68°F, we need to 1. Nightly (2200) CLOSE AC VENT to Grow Room 2. Daily (0700) OPEN Vent to Grow Room - Goal is to maintain TENT & CABINET TEMPERATURES OVERNIGHT - RULE - CLOSE Room Airflow during ‘Daylight’ periods(2030 - 0700) When on Flipped Schedule (Night LIGHT/Day DARK) - OPEN during ‘Nightime’ Period (0700 - 2200) Objective - 8 Plants, Single Colas, Sea of Green SOP: - WEAR CLEAN GLOVES FOR ALL SEED OPERATIONS - CLEAN All Instruments before use - Light Strengthveg := 100 + (#nodes * 100) - Light Strengthflower := [ 1000, 600, µMol/m2/s] - Scotoperiodveg := [ 1300, 1900, 6, hr] - Scotoperiodflower := [ 0700-1900, 12, hr] Environment - Mid Flower (2 Weeks) (Week 8-9) (F4-F5) - Temp: 78-82°F - VPD: 1.1 ± 0.1 - Photoperiod: 12/12 - Light Strength: 930 µMol/m2/s - EC: 2.3 - Late Flower (Week 10-14) (F5-F9) - Temp: 78-80°F - VPD: 1.2 ± 0.2 - Photoperiod: 12/123 - Light Strength: [930, 850, µMol/m2/s] - EC: 2.1 # Week 9-11 - EC: 1.4 # Week 12 - EC: 1.1 # Week 13 - Finish (Week 14) ( F10) - Temp: 78°F - VPD: 1.3 ± 0.2 - PPFD: 750 peak - Resin Bloom ONLY - EC: 0.8 Rooted Leaf Hydro 1.7 - 1.9 EC (Half RLA,Hydro Chart, EC to Targets): - Primer A: [ 8, ml, gal] - Primer B: [ 8, ml, gal] - Silica Skin: [ 4, ml, gal] - SLF-100: [ 5, ml, gal] - PhotosynthesisPlus: [ 6, ml, gal] ____________________ Mon 10 Jul 2023 # Flower 4 LJ2Q 57:F:4:1 - W/ Dehumidifier Installed, our Environment is now … Tue 11 Jul 2023 LJ2Q 58:F:4:2 Refill Res - [x] 6.5 - 7 Gal - [x] Primer A&B: [ 8, ml, gal], [ 80, ml] - [x] Silica Skin: [ 4, ml, gal], [ 40, ml] - [x] Photosynthesis+: [ 6, ml, gal], [ 60, ml] - [x] SLF-100: [ 5, ml, gal], [ 50, ml] - [x] Dr. Bohners: [ 10, drops] - [x] ECRange: [ 1.9, 2.0, mS] - [x] TempReservoir: [ 60, °F] Wed 12 Jul 2023 LJ2Q 59:F:4:3 Thu 13 Jul 2023 LJ2Q 60:F:4:4 Friday 14 Jul 2023 LJ2Q 61:F:4:5 Sat 15 Jul 2023 LJ2Q 62:F:4:6 - Plants per Feed Line: 4 - Feedwater per Line per feed (FPL): 120 - Feedwater per event (FPE): [ 480, ml] - Events per day (EPD): 12 # Hourly Fertigation During Lights ON - Feedwater per day: FPE X EPD: 480 x 12: [ 5760, ml, day] - Mix 2 Gallons @ 75% Strength (Medium Chart, FW 3) - Primer A: [ 7.4, ml, gal], [ 15, ml] - Primer B: [ 7.4, ml, gal], [ 15, ml] - CalMag Fuel: [ 3, ml, gal], [6, ml] - SilicaSkin: [ 3, ml, gal], [ 6, ml] - Lush Green: [ 3, ml, gal], [ 6, ml] - Root Anchor: [ 3, ml, gal], [ 6, ml] - Peak Bloom: [ 3, ml, gal], [ 6, ml] - Resin Bloom: [1.5, ml, gal], [3, ml] Sun 16 Jul 2023 LJ2Q 63:F:4:7 

Hi guys, Welcome back to Queen Peaky's Grasslands We're into week two of rinsing off these gorgeous little girls covered in strawberry Frosting You can already perceive some excellent smells👻 Follow us and always support us to always be on top Kiss kiss Peakyplanter La Reina

Me están pidiendo magnesio a tope, aparte de abonar con cal mag vía riego, también he abonado foliarmente... También he aprovechado y he añadido delta 9,... 5ml litro... Los tayos de las plantas y hojas algunas las tengo rojas, hay quien dice eso es la genética..., pero mis genéticas,no son rojas... Es falta de magnesio debido a la potencia del led... Les crea déficit de magnesio, también me pasaba con los LEDs chinos, pero la luz era rosa y no sé apreciaba ... Total que quiero indagar sobre el tema, yo creo que es carencia magnesio debido a la luz led ,la planta no da abasto,a asimilar tantos lúmenes y crea carencias... Mañana y pasado mañana abonaré foliarmente, solo con magnesio haber que pasa....

10/20 Day 86. Not really sure when to chop right now. I was hoping for a nice fade with some reds and purples but maybe it just won’t happen. Everything looks and smells great though. 10/24 Day 90. Finally getting some more leaf fade to go along with the trichs getting more cloudy. There’s still some clear trichomes in the mix so I’ll keep going a few more days, but at least I’m finally getting some signs she’s close.

Que pasa familia, vamos con la sexta semana de floración de estas Kiwi x Papaya feminizadas de Mavericks . Vamos al lío ,se trasplantaron en macetas de 7 litros definitivamente. El ph se controla en 6.0 , la temperatura la tenemos entre 24/20 grados y la humedad ronda el 50%. El ciclo de crecimiento puse 12h de luz, el foco está al 100% de potencia. De momento van creciendo a buen ritmo y tienen un buen color. La flor está cogiendo forma y ya empezó a tricomar. Gracias a Agrobeta de nuevo por el kit para esta temporada, unos grandes 🙌. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

Mad max is just full of buds now , couple of fingers thick and still chunking up , sticky as and loaded . Another bangs from Dutch Fem

Had to remove the net to gain better access to the plants.

10-18 Water. Let her dry out a bit. Seems i got heavy handed. Ugg. Lifting pots from here out! Seems she a little mad at me, but still holds course. 10-19 This am, burn and yellowish. From over feed and water. Flushed, uggg 1213 ppm to 550ish Full dry backs. Uggggg. Hated to flush since I just watered. But just got it done, before more burn. Should be ok. 🤞

Flush has began, 1st day they were fed 6 hours of Flawless Finish. Now onto just plain water to bring down the PPM of the media. Really trying to push these girls over the line and make the yield worthwhile! After the slow start they are starting to fatten and harden up, their like little golf balls. Next week is flush and that’ll keep going until the trichomes are 50% amber. 🙌🏽💚🇬🇧

First sign of mold formed. I cut the branch, remove moldy bit and drying it. I needed to get her inside as soon as possible, so this made me harvest the Peach Puree CBD faster as she was using the lights, I brought the church in and put her next the peach for her final night, you can see her in the 3rd picture. I needed to do some super cropping to get a more even canopy so that the light gets as many buds as possible. Was still not happy with how the lower branches are getting barely any lights so I did some foliation and tied the lower branches so they are higher (you can see some side ways branches in the video, that is because I pulled them in). Had to some reflective material lying around, so I wrapped that around her and she is looking very comfortable in her new home now. I've put some hay which I had laying around on the soil with some leaves I cut to act as some mulch which could be why she is drinking very little water, haven't had to water her since I brought her in 3 days ago (mind you she was under a lot of rain before that).

This week i switched to the new tent and been working on my vpd . Both ggs are doing amazing and bushing out moee then growing tall. They all are very happy now and growing faster then ever. Added lst clips this week and i really like them

Shes booming through the stretch! Got branches rowing up great as she fills right out. Did a big defoliating of most the leaves under the first net. Allow some air flow through the under skirt. Did a preventative treatment using dr zhymes. Than gave her a good shower to wash off any residual build up. I'm just starting to see pre flowers coming in at the nodes. So she will still have some stretching period to go. I'd say atleast another week of stretching out and filling up my net. Before I start seeing those white stigma pom poms coming in at the bud sites. Lets see what this lady can do. Until next update. Happy growing and stay lit fam.

6.4.25: FastBuds Mystery Seed #1: She has been topped twice and is looking pretty strong 💪 She has grown vertically, and leaves are always praying. Possibly too much light, so I have turned the dimmer down to about 90%. There are slight bleached tips on a couple of top leaves. I'm hoping to do the same LST with garden wire here very soon. Overall, the plant has nice big, fat leaves. Seemingly lush colour and vigorously growing since the double toppings. Very nice plant so far. 👌 13.4.25: This week has been so busy in the garden! I forgot to take any notes, so I'll see what I can do from memory! 😅 14.4.25: I have been super busy with all the other harvests in the past several days, so this is a little late. FastBuds Mystery seed #1 has been topped twice and the growth has been thick and lush. I watered several times this week, and I used Ecothrive Biosys with dechlorinated water PH'd to 6.4. I watered about 2 litres to each plant. I have been using wire, clips, and Bio stretch fabric plant ties to LST the plant. The plant has reached the 8 Gallon pot perimeter. The plant is in the first week of flower. I'm hoping to keep the canopy even with my RQS Northern Lights grow as I need to be able to compare the plants accurately for the experiments. I did snap off a branch, again the day after I said I'd be very careful 😖 The plant is very resilient though, and you wouldn't know anything happened at all, minus one of the first tops is missing. Thankfully I topped twice, so I still have 5 tops. Training Techniques used this week are LST and defoliation. I watered on 13th and 14th with the following solution; 4 litres of dechlorinated water PH'd to 6.4 which contained: ♡ 8 ml Xpert Nutrients Cal-Mag amino acids ♡ 1/2 Teaspoon Mega Crop Part A by Greenleaf Nutrients. PPM: 1000. 2 litres were given on two consecutive days. I watered in a top dress, which I will add what I used here, but it was another mess up, I'm sure you'll be surprised to hear 😅 Top dress: 4 gallons containing approximately: 50% Canna Terra Mix soil 25% Worm Castings 23% Perlite 2% Organic Dry Amendments, which were; ☆ Ecothrive Life Cycle ☆ Ecothrive Charge ☆ Diatomaceous Earth ☆ Ground Cinnamon ☆ RHS Mycorrhizal Fungi granules I used the top dress amount for established plants for a pot size of 30L / 8 Gallons. I'm not keen on the soil. I was supposed to get Canna Coco but I got sent Canna Terra in error. It was overdue for a top dress and I had nothing else to use. I don't like it in comparison. Coco is best for my needs. It's much fluffier, lighter, and easier to work with. Thanks for hanging out 🍃 ✌️ 💚 🙂

🗓️ Week 13 – Flower Week 9 (MAC n Cheese only) Stage: Final Flush 🌿 Overview: MAC n Cheese has entered the final phase of flower and is now deep into flushing with Flawless Finish. The fade-out has begun – leaf color is starting to lighten naturally as nutrient reserves are depleted. Trichomes are mostly cloudy, with just a few early amber starting to show. 💧 Flush Details: • Flush solution: CalMag (EC 0.3) + Flawless Finish @ 2 ml/L • Input pH: 6.2–6.3 • Drain EC: 2.0–2.2, slowly decreasing → No signs of nutrient lockout or overfeeding during the flush Observation: MAC n Cheese is clearing out at a steady pace, though slightly slower than Seriotica. The buds are heavy, dense, and sticky, showing solid late-stage development. No stress symptoms – just a natural fade and ripening under control. 🌕 Harvest Window: Trichomes are hitting the ideal range – cloudy with early amber – harvest is just around the corner!

Update week 2 of Bloom