I'll be updating the comment with the daily log shortly, but figured I'd get the photos and weekly overview up. I started off this week with a topping at about the 4th node, leaving the larger fan leaves on for now. I then left then alone for a bit while I waited for the new branches at the nodes to grow out, rotating as needed. By the end of the week, they had all bushed back up with new foliage and growth. I also included photos pf the flowering mother plant to keep up with that sneak peak. She still wasn't showing signs of flowering, so I gave her an extra 24 hours of darkness to hopefully kick start the process. As I went to go shut unplug the light source, I noticed that there was a smaller light leak from one of the vent ports, so I also made sure to close that up. At the end of the week when she started to show signs of flowering, I defoliated her to help with light penetration, as she's got massive fan leaves. You'll see in the photos that I took that opportunity to decarb the trim as well. I'm sure there's little to no THC-A, but whatever other compounds are present should make for a nice addition to some butter later on down the road. I just won't factor it in when approximating the potency of the final product.

Day 42: Went on vacation for 3 weeks, asked a friend to take care of my plants and make pictures and videos. He gave them feedings, did some defoliation but it is hard from a distance to guide him how to train or to defoliate.

The girls grew up again and are already 110 cm tall. I don't see any problems ... I did supercroping and they are fine too ... We keep going ...🍃🍃🍃

COMMENTED BY MadeInGermany MadeInGermany 6 days ago Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Hello everybody :-) Another nice week goes by. The network for the ScrOG was stretched :-) It is really strange how fast it grows in Aerophonic :-) no comparison to all media 👍. I will put it in bloom again in the coming days because the stretching at Aerophnic is extreme :-). With training I stopped so she was only topped 2 times in total. As always, the water was completely replaced every 10-12 days and everything was cleaned. She was checked for health so nothing stands in the way of her :-) Have fun with the update and stay healthy You can buy this Strain at www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez X Gelato 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2 - 5.8 💦 💧

Week 19 (Harvest) 2-6 Temps: 19.8 to 25.1 degrees Humidity: 41% to 62% Watering: 1000 ml. 0.0 6.5 3-6 Temps: 19.8 to 23.8 degrees Humidity: 45% to 67% 4-6 to 5-6 No info. 6-6 Harvest day! I removed some large fanleaves and hang the buds to dry on the branches. 7-6 to 19-6 Average temps: 21.3 degrees Average Humidity: 59.7% After a dry period of 12 days the buds are ready to be trimmed. Here are the end results: Buds: 72 grams. Trim: 34 grams.

Día 71 (30/12) Christmas holidays. Only watering Día 72 (31/12) He recibido mi nueva lampara Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp Procedo a instalarla, de modo que tengo la tienda de 120x60 cm perfectamente cubierta con las DOS (2) lámparas FC1500 EVO Es ideal tener dos lámparas, porque así puedo ajustar la distancia a la lampara en función de la altura de capa planta Ajusto ambas lámparas al 75% de potencia (Total 225W), que es más que suficiente para cubrir el área de 120x60 cm Día 73 (01/01) CBD Auto 20:1 #1 - Muestra una ligera deficiencia con algunas puntas de las hojas dobladas hacia arriba y clorosis... Creo que le voy a dar otra ración de BIO PK 5-8 OG Kush Auto - Está apilando cogollos de forma brutal. Increíble el olor y la cantidad de tricomas que está formando 😍 Día 74 (02/01) CBD Auto 20:1 #1 - Se empiezan a formar tricomas entre los incipientes cogollos OG Kush Auto - Una pena que se haya intensificado la deficiencia de CalMag en las hojas, porque los cogollos son gordos y densos, y cubiertos de tricomas Día 75 (03/01) CBD Auto 20:1 #1 - Voy a darle un boost para las 4 semanas que le quedan hasta la cosecha con SILICIUM FLASH Hago un pequeño agujero cerca del tallo, espolvoreo 25g de SILICIUM FLASH en el agujero, lo cubro de tierra. Riego con una solución de 2g de BACTREX por litro de agua. OG Kush Auto - Impresionante densidad de los cogollos que empieza a doblar las ramas 😍 La ventana de cosecha se acerca! 💥 Día 76 (04/01) CBD Auto 20:1 #1 - Investigando me doy cuenta de que lo que le pasa es quemadura de luz, ya que la parte externa de la planta sufre clorosis, y la parte interna (donde no alcanza la luz) está completamente verde Ajusto la lampara sobre esta planta para 40 DLI OG Kush Auto - Sigue poniendo los cogollos duros como rocas y muy llenos de tricomas! 😍💥 Día 77 (05/01) CBD Auto 20:1 #1 - On going OG Kush Auto - Empieza la senescencia en las hojas de abanico, acelerada por la deficiencia de CalMag que ha tenido. 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/ With 2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp

mide cada vez más, va creciendo correctamente.

well well well we have 157 grams, I know they don't look it but are like little rocks, Zero popcorn ...Well happy about that 😄I certainly wasn't expecting her to cross 100g mark but she surprised me. what a plant to grow man ! 😍 its been amazing start to finish with this one. No hard work, no fuss. couldn't quiet give her more darkness at the end as planned due to the other white widow (pheno#2), it had 3 weeks to go yet, didn't want to disturb her. the clone I took off the harvested WW, is 3 feet tall now. Healthy Mum with a green gelato, Next run is SOG Green gelato + White widow !! can't wait 😶 Smoke is clean. Citrus and piney with hints of sweet gassy under tones. Effect starts soon enough, giggles and munchies an then off to peaceful sleep . Thank you everyone who checked it out, liked and commented. Its more fun this way 😎 I hope you all enjoy the pics. Cyall next time, stay safe

it's a pity, but the weather is not spoiling us, this week the girl has seen very little sun :( despite everything, she is growing a little bit, from next week she promises better weather :) well, this is just a test, so I don't expect a harvest of more than 10 gr :D so everything is fine :).

GP #1 required another week of heavy defoliation. Light defoliation on GP#2. Shes sticky to the touch and starting to show orange hairs. Smell is starting to really come out in the room even before I open the tent. GP#1 is at 43 inches and GP#2 is at 40 and a half. I added a video where she knuckled up after being supercropped a couple of weeks ago. I thought I needed to brace her to handle the bud weight but she’s going to be just fine. Til next week!

trimmed and netted the plants last night, 12/30, and the energy pushed the plants to stretch another 1/2 inch+ this will be the last week of vegetation as I prep this light leaking tent for flower, not a fan of mars hydro at all right now. their poles are the weakest I've encountered yet, too many light leaks and this is the first grow with it. My high cfm fan , which is only a 4", is pulling the fabric too much and causing the leaks to grow a bit. This is not new, its been happening with indoor tents for a while now but I thought a grow company such as MH would have a decent, respectable tent. My solution is Blackout Curtains draped over the sides. However, I am hesitant to do this with the MH tent as the poles for the tent are too weak as it is, tsk tsk tsk mars hydro. will continue to increase the watts the next 6 days HAPPY NEW YEAR a combination of light and fresh soil has made the plants stretch so I will finish tightening up the MH tent today and ill start flower tomorrow, day 62. while adjusting the height I must have nudged the dial for the dimmer and sent it to 184w. this would have been a big jump but manageable but I lowered the light 7" and the plants took a bit of a hit. I adjusted the light back down to 160w and I'll let the plants recover before anymore adjustments.

Looking good hopefully all will be showing signs of flowering at the end of this week. I'll update a few more times this week.

Hola chicos subo alegremente mi seguimiento

Sehr gute Woche. Wetter 20-29 °C gut Sonne, die Autos sind im Stretch und explodieren.. die Photos nach dem topping und z.T. Training sind schön am verzweigen 😁 Freu mich auf die Autos. Herrliche düfte von Apple und banana.es läuft gut 👍bis nächste Woche ✌️

Well this was long strange trip with 1 leaf lol. Started as an extra cutting I was experimenting with to see just how much abuse it could take before it died. I put it in my big tent from day 1, never misted or covered it and pretty much treated it like it was mature plant. It lost all its leaves but 1 and I had removed all the dead material so all that remained was 1 leaf with some green in between all the yellow. It didnt appear to have anywhere to sprout new growth, all the nodes were barren with nothing but dried up brown nubs then I decided I wanted to try to save it and I was curious if it would grow or just remain a stem and 1 leaf. I was burnt out on all the data input and pic downloading and wanted to screw around and do something fun that didnt end up feeling like a chore. For the most part I succeeded although some of those videos took me forever lol. I had never done anything like that before and that wasnt my original plan. I just started screwing around and 1 thing led to another and here we are. Hope everybody who followed along enjoyed it and I hope anybody watching in the future at least gets a couple laughs out of it. That's what this random collection of nonsense was all about...just trying to have some fun and get a few laughs along the way.

All is developing nicely, introduced cannazym and boost to the mix. Finally I have access to a better camera which you will see on the later pics. The cuttings I took seem to survive for now, with some outrooting their cubes already.

04.09.2025 – 10.09.2025