Está semana empecé con el lst en las 3, regué con fertilizante intercalando 2 riegos de agua, como riego con pulverizador manche algunas hojas y se quemaron :( a tener más cuidado la próxima dé igual manera vienen bien

I made this week's feed to reach around 550 to which was a big jump from 250 ppm. This was my usual start out but once I saw the information on the Royal Queen Seeds Website I decided to up my juice! Check out my Instagram page for more of my home grow! @Canha_patch🌿🌿🌿

.

12w1d (85d) - Any day now! Started using Fish Sh!t to start the process of flushing her out. I read the journal article and, really, no one has a clue if flushing is as beneficial or not. Just do whatever…why not?

Plants doing very well but Temperatur and humidity are killing right now. Can't do nit really anything to get better results. Adding now once a week about. 0,7 grams of the NPK from greenhouse

.

Day 50 and a new week... the summer comes back to germany and "Hilde 2.0" goes well 🙏😀 Day 51 ... the summer is back in germany ... sun and heat 😎👍... good for the Buds 😉🙏 Day 52 summer sun and warm weather....😎🙌🙏👍 Day53 hell yeah....sun and hot weather 😎🙏👍

2025-09-18 SHAMAN- Lady loves her space. She sitz in a rich deep bed of loose Soilmix, stabilized in 2 SCROGS, and covered from above with a wonderful taransparent roof We had a couple of rough days with heavy Wind and Rain, but she stayed safely xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

today with more experience. I see that I made some mistakes, about nutrients and some techniques, but as I repeat this was my second crop. it did not yield as much income as it should, but it was worth it, cultivating and learning.

Next to the GPP which is top right under fan Left of it - J.Hustle, Christiania Seeds In front - 1 fab (on autopot tray) Sweet, Black Cream AND Terpyz Supa Slick Shore in a 2 gal fab in a tray on ground front right And ofcourse, other plant bottom left is Terpyz, SWAG MDC! ✌️💚

Leider sind die Blattspitzen leicht verbrannt. Ich habe die Temperatur zu schnell erhöht 😒 Jetzt erstmal wieder auf 25°C Tagtemperatur und Alg a mic ins gießwasser, das sollte helfen 😌 Nach 2 Tagen hat sich die Pflanze sichtlich erholt 😍, sie sieht vitaler aus als je zuvor 😁 An Tag 33 zeigt die Shogun ihre Vorblüte 😙

Many colas and hard buds here! Hope to get good results, even if i got some deficiencies. One of the three had some issues and didnt flower properly, the buds are airy and there is little resin production, while the other 2 have frosty and well stacked buds. I think they will need an extra couple week to finish off. As soon as i see 100% milky trichomes with 10/20% amber i will cut them down. Gonna keep u up to date

Bending the plant makes it stronger

Day 9 Flower and they are felling up the space quite nice , so far I’m very impressed with the way this girls are responding to the SF-2000 💚🙌💪 Seeds @seedsmanseeds Gelato OG 3x - 2 Pop out Light spider farmer SF-2000 ( test run from seed to stone ) https://spiderfarmer.eu/collections/full-spectrum-led-grow-light/products/sf-2000-led-grow-light All i grow is medicine for myself, nothing to sell, don’t even ask Do it with love for the love 💚💚💚 growers love 💚💚💚

Day 22 25/07/24 Thursday Still no Feed/water since Tuesday. Been a humid and overcast two days so not as much evaporation as normal. All plants happy and healthy 💚 Video updates Day 23 26/07/24 Friday De-chlorinated watering pH 6 with 5ml calmag to 5L water. Watered each with 250ml and had small run off. I will continue to feed/water with small run offs to help prevent salt build ups. Video update. Day 26 29/07/24 Monday Nice feed today, using de-chlorinated tap water pH 6. They each had 300ml with small run off. All looks incredibly happy and healthy! The Auto Kabul that was mutated and twisted has pulled herself through and is just a bit shorter than the others. Day 28 31/07/24 Wednesday End of week😁 De-chlorinated water pH 6 today with Plagron pk13-14 5ml to 5L Plagron power buds 5ml to 5L Used 300ml of the 5L solution. I will be using these on water days from now on as they are advised to be used every irrigation. We'll see how they perform 💪💚

Hi! It came to the point that I am running out of buds. Literally. i gotta come clean and admit that I couldn’t let her mature for one more week 😪. But you my situation right? One thing I am sure is that this is quality smoke 💯❤️💪 Ps Orion

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Harvest Ooooooh ihr glaubt ja gar nicht, wie Geil die Sorte beim Wet Trim gerochen hat. Es hat was von Tangie, dieses Moschusmäßige, schwer aber mit Noten von Schokolade und Weintrauben... Hätte ich nicht gedacht und echt toll geworden. Mache nochmal ein Update, wenn die rdy to dry Trim ist 😄

Hello, my amazing green-thumbed friends! Welcome to the Week 1 flower report for our beloved P.C.R.s. The transition from veg to flower is a magical time, and our plants are already showing signs of their future glory. Let’s dive into the exciting details of this week! Entering the Flower Stage Our P.C.R.s have officially entered the flowering stage, and the transformation is already visible. The stretch has begun, and you can see the plants reaching up, preparing to produce those beautiful buds we’re all waiting for. This stage is all about supporting their growth and ensuring they have everything they need to thrive. NutriSpray Magic This week, we’ve been diligently spraying Aptus Holland NutriSpray, and the results are phenomenal. NutriSpray is like a spa treatment for our plants, providing essential micronutrients directly to the leaves. It helps with nutrient uptake, reduces stress, and boosts overall plant health. Our P.C.R.s are absolutely loving it, standing tall and proud with their leaves praying to the light. Nutrient Transition With the start of the flowering stage, we’ve made some important adjustments to our nutrient regimen. We’ve stopped using StartBooster and replaced it with TopBooster, which promotes flowering and bud formation. Additionally, we’ve introduced P-Boost, a phosphorus booster that enhances root development and flower production. TopBooster: Encourages larger and more abundant flowers. P-Boost: Provides essential phosphorus for robust root and flower development. NutriSpray: Continues to support overall plant health and stress reduction. Optimal Conditions Maintaining the perfect environment is crucial as we move into the flowering stage. Our TDS is now at 360, with a pH of 5.9 and a temperature of 21°C for watering. These conditions are optimal for nutrient uptake and overall plant health, ensuring our P.C.R.s have everything they need to produce those beautiful, resinous buds. Care and Attention Paying close attention to our plants during this stage is key. Regularly inspecting for any signs of stress or nutrient deficiencies and adjusting care as needed ensures our plants stay happy and healthy. The love and care we put into this process are reflected in the vibrant health of our plants. In Conclusion Week 1 of flowering has been all about setting the stage for a bountiful harvest. With the help of Aptus Holland NutriSpray, TopBooster, and P-Boost, along with our careful attention, our P.C.R.s are off to a fantastic start. The excitement is building, and I can’t wait to see how they develop in the coming weeks. Shout Outs A huge shout out to @aptusholland, our main sponsor, for their incredible products that keep our plants thriving. Another big thank you to @artgenetix for creating the phenomenal P.C.R. strain. And to the wonderful community at Grow Diaries and all our followers, your support and enthusiasm keep us going. Let's continue to grow together! Until next time, happy growing, and may your gardens be full with love and green! Genetics - P.C.R. @Art_Genetix_Team https://artgenetix.world/ Nutricion @aptusholland https://aptus-holland.com/ LED Power @Lumatek and @viparspectra As always thank you all for stopping by , for the love and for it all, i fell blessed to have you all with me for one more love journey Thank you Thank you Thank you , you guys are great and have been amazing , thank you for everything ! #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dogdoctorofficial #growerslove
 With true love comes happiness , Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so ! Growers love to you all

Banana Guava Automatic – Woche 6 (Blüte Woche 1) Meine Banana Guava Automatic befindet sich aktuell in Woche 6 und hat in dieser Woche in die Blütephase umgeschlagen. Man erkennt deutlich, dass sie jetzt ihren Fokus auf die Entwicklung der Blüten legt. Sie zeigt einen durchgehend gesunden und kräftigen Wuchs. Ihre Struktur wirkt stabil und gut aufgebaut, was eine ideale Basis für die kommende Blütezeit schafft. Die Pflanze macht insgesamt einen sehr vitalen Eindruck und kommt hervorragend mit den gegebenen Bedingungen zurecht. Alles deutet darauf hin, dass sie sich in den nächsten Wochen stark weiterentwickeln und ordentlich liefern wird. Neue Updates gibt es jeden Sonntag – bleibt dran! --------------------------------------------------------------------------------------------------------------------------------------------------------------------- Banana Guava Automatic – Week 6 (Flower Week 1) My Banana Guava Automatic is currently in week 6 and has transitioned into the flowering phase this week. You can clearly see that she is now focusing her energy on bud development. She shows consistently healthy and vigorous growth. Her structure is strong and well-built, providing an ideal foundation for the flowering stage. Overall, she looks very vital and is responding perfectly to the current conditions. Everything suggests that she will continue to develop strongly and deliver great results in the coming weeks. New updates every Sunday – stay tuned!