Likes
Comments
Share
05/03 - (C) - All the babies are coming along amazingly - They are in week 2 of early pre-flower and white hairs are setting in accordingly - Since the addition of the drip lines and keeping their feeds consistent they are thriving and coming into flower without any issues. 05/03 - (M) - The mother is also coming along nicely - Dense nuggs with heavy trichome build up on all the colas - I have increased her feeds to twice a day at 1 minute feeds per cycle. 05/07 - Disclaimer - Please disregard the weeks on the grow calendar as I am now they are offsetted for Mother - Clone harvest. 05/07 - (M) - Cutting down the mother this weekend, She seems to be suffering a bit from being ran so long (Lessoned learned) - Her buds are dense and frosty af!!😎😎😎- Her dry run will be as much as 60-60 can be (Low and Slow). 05/07 - (C) - Clones are in early flower running accordingly - since hooking them up to the Vivosun Drip system their feeds have become more consistent allowing them to feed on schedule - the feeds are offsetting clean water and nutrient feeds - They will continue to run in the 3x3 until the mother is dried out and harvested then they will be moved into the 4x4 - I will also increase "Cane Molasse" dosage to increase trichome production and facilitate and more robust terpene profile for all of them. 😎😎😎😎.. Peace and Bud..
Likes
17
Share
I have upped the feed now to about 1/2 strength and the plants are loving it. They're starting to recover from the low stress training last week and stretching upwards. Budding is underway with white hairs, and a distinctive gassy smell on 3/4 of the plants. I'm guessing I've got two phenos - 3x Chemdawg dominant and 1x Hindu Kush dominant. We'll find out when they start to flower fully. Switched to 18/6 from 24/0 on day 36 - now that they're flowering they seem more sensitive to heat from the lights (Also backed the light off a couple inches). This resulted in an immediate growth spurt!
Likes
16
Share
Likes
14
Share
@eurorack
Follow
Pretty much the same state as last week, plants growing well, still have the runty Pink Kush plant but its pushing flowers out well and getting some good colour to it. Red Pure plants are growing great though one of them has some leaf spotting but its not seeming to hinder growth. Nutes same as last week, only watering when I get a full finger-depth of dry Coir and checking with soil probe for pH and Moisture too, getting a regular pH7 in the soil, I've got some pH Down to add a drop into my tap water just to ensure I'm watering with the right pH.
Likes
Comments
Share
Likes
9
Share
Likes
37
Share
@Aleks555
Follow
Runtz - Zamnesia Seeds "Our girl is thriving and steadily gaining mass, feeding happily on nutrients from Plagron. Daytime temperatures are sitting at 28°C, with nighttime temps between 19°C and 22°C. Humidity levels are kept around 55%. She's doing great and we can't wait to see her full potential!
Processing
Likes
12
Share
@Cannabot
Follow
This strain loves the nutes that's for sure.The way the main cola is forming ...gna be huge.Sweet asf smelling,gna feed her tmw again, every 2/3 days she needs to eat atm.Cant complain
Likes
6
Share
Happy with my plants 😊🙏
Likes
3
Share
@CalGonJim
Follow
4/27 1 PM thank you Fast Buds!!! We have Gelato Auto we got our special Mendo Frost Auto for our mystery box today. It’s very exciting and a Frost Banger Auto F4!! greatest day of my life!! I just love everything about them😍🌿🌿🌿🌿 4/28 1:54PM massive painful thing on back of neck infected with i would f....ing die alaready!!! i cant move much, very painful 4/29 2:45AM Not moving well. EC 1.7 today not much runoff, maybe bottom feed but i dont want to burn the plants BUT I cant move so another trade off 4/29 9:18AM NEW GROW THEME ....RACE WAR GROW..SPONSORED BY THE SPLC!!!!I GOT A REVA 3RD SISTER ACTION FIGURE, SHE GOES FULL DARK SIDE AND MARRIES JAR JAR WHO IS SECRTLY THE HEAD OF THE EMPIRE KLU KLUX KLAN....SO REVA MARRIES INTO THE KLAN...AND THE WEDDING IS SPONSORED BY.......THE SPLC!!!! ITS PERFECT. OMG...AND WE CAN DO A MONTEL GROW AND HE CAN DO A SHOW NEXT ON MONTEL, REVA, WHAT WENT WRONG?? 5/1 5AM **Hell yeah, that’s the kind of late-night (or early-morning) epiphany we love.** Dr Pepper + peanut butter cookies sounds like a wild, sweet-salty, cherry-cola spiced twist. The 🌿😂 makes total sense—some of the best flavor combos hit when you’re relaxed and creative. ### How to actually make Dr Pepper flavor work in cookies Dr Pepper’s profile (cherry, vanilla, warm spices, cola bite) needs concentration so it doesn’t just evaporate or make the dough too wet. Here are practical ways: 1. **Reduction/Syrup** (best for strong flavor) Simmer 2 cups Dr Pepper in a saucepan over medium heat until it reduces by half (about 1 cup). It’ll get syrupy and concentrated. Let it cool. Use ¼–⅓ cup in your peanut butter cookie dough in place of some sugar or liquid. This gives real Dr Pepper taste without watering it down. 2. **Simple cake-mix hack** (super easy starter) Mix a chocolate or vanilla cake mix with 6–8 oz Dr Pepper + peanut butter. People make 2-ingredient Dr Pepper cookies this way—add ½ cup creamy peanut butter to the batter for your twist. Fold in chopped peanuts or a swirl of extra PB. 3. **From-scratch peanut butter cookie base + Dr Pepper** Start with a classic PB cookie (butter, peanut butter, sugars, egg, flour, baking soda/soda, vanilla, salt). - Replace some brown sugar with the Dr Pepper reduction. - Add 1–2 tsp vanilla + a pinch of cinnamon or allspice to echo the soda’s spices. - Optional: a few drops of cherry or almond extract to amp the Dr Pepper notes. ### Quick test recipe idea (Dr Pepper PB Cookies) - ½ cup butter, softened - ½ cup creamy peanut butter - ½ cup brown sugar + ¼ cup Dr Pepper reduction (from above) - 1 egg - 1 tsp vanilla - 1¼ cups flour - ½ tsp baking soda - Pinch salt + optional cinnamon Cream butter + PB + sugars/reduction. Add egg + vanilla. Mix in dry ingredients. Chill dough 30 min. Bake at 350°F for 10–12 min. They’ll spread a bit and get chewy with that cola kick. **Pro tips**: - Reduction is key—plain Dr Pepper in dough usually bakes off too much. - If you want stronger flavor, look for Dr Pepper extract/flavoring online (some baking sites sell “Dr Soda” type). - Top with a light glaze: powdered sugar + a splash of Dr Pepper reduction. Go make a small test batch with what you have. Report back how it turns out—I’m genuinely curious if the cherry-cola + peanut butter hits as good as it sounds in your head. What’s the vibe you’re going for—chewy, crunchy, or fudgy? Got any other flavors you wanna mash in? Let’s refine this masterpiece. 🌿🍪 5/1 7AM 1.5EC 6.0 pH 2 liters each Maxi Bloom powder only. 5/6 5 AM AC 1.078 pH 6 light runoff today
Processing
Likes
25
Share
Bonjour à tous les padawans et les maîtres jedis Pour cette semaine 4 au jour 23 ma plante fais 17 centimètres et son sixième noeud apparaît je décide donc de pratiquer un LST sur ma plante. Pour ce j'utilise du fil de fer galvanisé que je plante directement dans le substrat en faisant attention de ne pas endommagé les racines car n'oublions pas que ce qui pousse dessus pousse aussi dessous. Jour 17 je pulvérise du une solution composé d'une cuillère à café de savon noir mou dilué dans un litre d'eau en prévention d'éventuels nuisibles. Je corrige mon LST suivant la pousse de ma plante ... Pour ma par c'est la manière dont je procède mais petit rappel de la technique du LST: Quand commencer à appliquer la technique LST De nombreux cultivateurs commencent la manipulation dés que les plantes possèdent entre 3 et 6 nœuds ou une paire de feuilles. Durant cette première étape de la croissance, le tronc encore flexible est pliable sans risque qu’il ne se casse, même si au fur et à mesure du développement de la plante il sera de plus en plus difficile de le plier. Nous pouvons continuer à guider la croissance des branches durant toute la culture, même durant la floraison, ce qui pour cette étape représente un grand avantage face à la taille, qui n’est pas du tout recommandé une fois que la formation des têtes commence, cela stressera en effet la plante, ce qui aura pour effet de retarder la récolte. Comment appliquer la technique de guidage LST Si nous sommes prudents, la flexibilité naturelle des fibres du cannabis permet de plier leur tronc et branches avec une relative facilitée, même durant la floraison des plantes. En utilisant une corde fine, nous pouvons accrocher la pointe de la plante à la base du pot par exemple ou à un tuteur que nous aurons planté dans le substrat. Nous plierons le tronc avec précaution et nous le fixerons avec la corde, à partir de là, nous pouvons augmenter progressivement la tension de la corde, chaque jour un peu plus, jusqu’à obtenir la position souhaitée. Soyez attentif à la réaction de la plante, essayez de ne pas appliquer trop de pression sur la corde et rappelez-vous que la flexibilité des branches peut varier d’une plante à l’autre. Pour obtenir de meilleurs résultats, il suffit de suivre quelques règles simples. Pour commencer, nous devons choisir une corde fine mais pas trop pour ne pas blesser les troncs au fur et à mesure qu’ils grandissent et qu’ils deviennent plus gros. Nous pouvons utiliser des crochets en plastique souple ou de n’importe quelle autre matière flexible pour éviter d’endommager les plantes. Spécialement en intérieur, utiliser des cordons en plastique de couleur (voir les diaries de @Silky) est très pratique pour voir facilement les accroches et faciliter le travail au milieu du réseau formés par les cordes, les tuteurs, les mailles ou les supports que nous aurons dans la culture. Bien entendu, en culture extérieure et surtout en guerilla nous ferons juste le contraire et nous utiliserons des matériaux de couleur qui n’attirent pas l’attention pour que notre jardin reste discret. Pour stresser les plantes au minimum, la mieux est de réaliser ces manipulations le soir ou juste après que les lampes en intérieur s’éteignent, ce qui leur permettra de se remettre durant la nuit. Normalement, le jour suivant nous pourrons observer comme les pointes des branches que nous avons pliées se dressent de nouveau vers le haut à la recherche d’une source de lumière. Je combine un pincage d'Apex au LST cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Que la force soit avec vous💪
Likes
21
Share
Cut down at day 60. Now drying for approximately 10-14 days in the same room with temps at 68 degrees and 60% humidity.
Likes
15
Share
Happy to have her in the flower tent! Photos/video taken 49 days after breaking soil, day 7 of flower.
Likes
13
Share
@Aedaone
Follow
Temperature and measurements listed in grow conditions are averaged for the week. The pH listed in the grow conditions is soil pH. Nutrients listed in nutrients section are ml/per gallon of soil. Day 1 we had rain showers in the morning and throughout the day. They showed first sign of flower. Day 2 we had rain in the morning, drizzle and showers in the afternoon. The ferrous sulfate reduced the soil pH from just above 7 to just below. I added 10ml blood meal and 10ml ferrous sulfate top dressed to each pot. The nitrogen should boost the stretch during early flower. The additional ferrous sulfate should keep the pH in the 6.5-7 range and help with chlorosis during early flower. Day 3 we had more rain, drizzle, and mist all day. The soil pH is responding slowly. It's down to 6.8 Day 4 we had rain all morning. The pots are soaked. Day 5 we missed the scattered showers, but it's been 80-90% humidity. We did have lots of sunshine. Day 6 we had lots of sunshine and temperatures above 80° F Day 7 we had lots of sunshine with temperatures in the mid 80's F. I had to water about .5 gallons directly from the hose. The well water is 7.6 pH and 50°F. Overall this week was a success this plant more than doubled in height. There's still a small excess of phosphorous in the soil. The plant grew into it this week.
Likes
Comments
Share
If you know me then you know I love me some blueberries by Humboldt I am a fan of Humboldt personally but yeah all 4 popped I bought three they give me 4 seeds .. just glad to be able to grow this even though some many have let see how I can do this lol
Likes
11
Share
*Week 3 Flower - 09/10* Blimburn Apple Fritter - Seedsman Genetics Critical+2.0 Healthy - 0 signs on of deficiencies Most fan leaves have been stripped; - Lighter defoliation - Aggressive LST on main colas *Week 3 Flower Mid-week update 09/13* Approximately 3 inch increase in Height on both plants - Critical+2.0 - Seedsman Genetics - Blumburn Apple Fritter 1 Gallon increase on water feed (Nutes included) Budsite density has increased. Light defoliation *End of week recap 09/16* (Week 3 Flower) BlimBurn - Apple Fritter - 47 Inches - Flowering processing accordingly - 0 deficiencies Seedsman Genetics - Critical+2.0 - 46 Inches - Flowering processing accordingly - 0 deficiencies Increased water feed (2.5 gallons every day +Nutes) *SEE UPDATE END OF WEEK VIDEO RECAP*
Likes
16
Share
@Dunk_Junk
Follow
Decided to start my #1 favourite strain so far! 😍 It will be interesting to see if I 'overrated' it last time or not. In her 20 litre airpot is a mix of new compost : new canna terra : perlite in a 3:3:1 ratio by scoop. Also I should mention I riddled the brand new compost AND Terra soil through an approx 6mm 1/4" screen. This makes the soil wonderfully soft. I've not done this on my recent grows, lets see if it makes a difference or not. She is 7 days above ground now.
Likes
2
Share
Plant is growing good. Still really pretty to me. Hoping to flip around day 60