Likes
Comments
Share
@Be4ry20
Follow
Hello People! I harvested my Honey Runtz now some days ago already, was busy with life and didnt post. yet she is drying well in my dry tent! im a bit nervous about making the dry sift soon. will be my first time sifting a whole plant! will post more once she is dry and sifted! :) Hello People! guess its time to show my first time making hash off. its my first time doing this kind of dry sift so didnt know what to expect or what to do. i did alot of research and just free balled as i felt like is right. After Harvesting and Drying i took all the sticks out, left the sugar leaves on the nugs and then put everything in the freezer for like 3 days. ordered some dry ice and did alot of preperations. like getting some big sifting screens. so first i put like 1/4 of the frozen material in a 220 micron bubble bag inside of a big bucket. threw some dry ice in and then started to shake it, so the trichomes felt off.then i collected everything from my bucket and put it in a glass jar with parchment paper (to get better out again)did this 4 times so no material got left over. after the first sifting with the bubble bag, i threw everything on these big sifting screens with 190; 160 and 73 micron. then the drumming started, i used 2 spoons to like hit/drum the screens so the trichomes get seperated by size. i felt like the screens got clogged at some point so i stopped and was like yea thats okay enough lets go to the next step, collecting everything and pressing. the first layer 190+ got discarded. layer 190-160 got saved as well as layer 73-160. everything below the last screen got destroyed by my own mistake. the tape i used to secure the parchment paper on a plank ripped and everything went flying. well i wanted to discard it anyways.. after the sifting screens i used the frenchy cannoli methode with a hot water bottle to press the trichomes to some nice hash. the results: 190-160 micron: 12,4 G 73-160 micron: 32,2 G Total: 44,6 G fully legal here :) im very happy with the results, even tho the hash is a bit green. after all it was my first time doing it like that. i feel like i need to dry it a bit more next time. so the screens aint clogged and thus i can better seperate the trichomes, maybe it is less green then. maybe next time im not using the big sifting screens but rather go for some static with a glove or a ballon.
Likes
6
Share
Loving the structure the squatiness too her just the leaves on her are beautiful super vigorous after the last feed I left for 24 hrs came back she was like BAM ! HELLO YOU LIL BITCH 😅🤣 IM like okayyy gna take cuts off this healthy gal fo sure gna keep her around for a lil while like my cherry paloma cut why not I know this here red pop gna be a banger 🤪
Likes
2
Share
@PalmaGrow
Follow
Inicia nueva semana se prepara para orientar ramas 28 - 3 julio
Likes
18
Share
PURPLE KUSH / KANNABIA SEEDS WEEK #8 OVERALL WEEK #7 VEG This week this lady is doing good she's fully recovered from transplant and growing strong she's been topped and has the bud clips for LST here's another great week of growing!! Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! Thank you KANNABIA!!! BUDTRAINER.COM / BUD CLIPS PURPLE KUSH / KANNABIA SEEDS
Likes
3
Share
@Ryno1990
Follow
My big girl here Grapes an Cream from Atlas seeds is gunna finish the biggest girl of them all an the frostiest too she has been an amazing grow this hole time an one of my favorite strains now atlas did an amazing job making this fast flowering strain
Likes
21
Share
@Rollex420
Follow
Dos Si Dos # 33 ready for drying in the jar, honest weight (53,5g) seeing the structure which was very small I would have expected something less.. but I am very satisfied. the quality of this weed is absolutely at the top, the taste is very well defined.. when smoked it makes your nose tingle,flavor it is mainly pure lemon with a hint of mint in it. even the strong smell induces an entire room in a few seconds without even smoking it yet. I also collected a 0.4g of scissor hash which turned out very well. it is my favorite in this crop because it surprised me in everything both for its unique terpene profile and for its yield that I never expected given its size compared to wedding cakes. the total weight therefore of all three plants is (135.5g) and a total trim of (44.9g) that according to the calculations even of these crops I reached (1g/watt) precisely. (And im not a pro) I am certainly satisfied with that. 🙌🏻💚
Likes
14
Share
@Radagast_
Follow
04.08. Runtz# Day 64# Day Flowering 47# The plants are nearing the end, 5 days ago I started to give them a "flawless finish" and if some people needed another 2+ weeks at that point according to what the microscope says, the leaves and the very form of the flowers, but the humidity is high, the rains are frequent lately and the conditions for mold are ideal, so I will not risk it and they are this small, and the caterpillars have also started to be annoying... However, the situation has changed... half of the plants were almost at full strength, but with the fact that a week ago I gave it overdrive because I planned to give it another two weeks and then give it only clean water for a week or two, it prolonged their flowering, that's what I concluded, a bunch of new transparent trichomes appeared on the flowers and now they need two more weeks at the moment, and I already started with "flawless finish" 4-5 days ago, but well, I'll continue like that when when they are ripe, I pick them unless mold appears or caterpillars attack... 3 or 4 plants will be through a week to a maximum of 10 days ripe (the way I like it) for picking, the rest in two weeks (as I said before, if no caterpillars or mold attack)… Yesterday was the end of their ninth week. Rutnz 1# picture no. 29# harvested,trimmed and left to dry on 31.07. it is still drying. This dwarf had only one big bud along the whole plant, and I expected something like this, especially because it was in grass that is bigger than it, and the humidity has been really high lately... mostly, the mold started and some spiders also ruined it a lot, I must have thrown away a third of the flowers... I had to cut the plant into heads so that I could see all the infected ones and remove them. Runtz 2# picture no.30# and these two videos Harvester,trimmed and left to dry 02.08. This plant also started to mold, the whole two heads that were below, immediately up to the main bud, they started to mold (the empty space between the main head and the lower heads where the stem can be seen), and later, after picking, I inspected the plant in more detail and found something else small all the way down... everything that was even a little bit infected was removed (if a head was slightly infected, the whole head was removed, not just the infected part) I lost a bit here less than a quarter of the flowers, approx. Stay High and Keep Growing!!!
Likes
2
Share
Can anyone shed any light on this mutation? Just 3 top leaves no nodes or sites other then the lower first set?
Likes
2
Share
4.21.25. 3rd week of veg just started and the tie down method is starting to payoff, definitely going to keep canopy nice and low! Hope to get 2more weeks of veg, guess I will know real soon! Thanks for checking out grow! Enjoy
Likes
9
Share
@DE_BW
Follow
This week marks the transition into the final phase of the plant’s lifecycle. I’ve officially switched to Overdrive, and the effect is already clearly visible — the buds are noticeably swelling and gaining density across the entire canopy. The stacking over the past days has been impressive, but now it’s shifting into pure bulk production. Calyxes are expanding, and the flowers are tightening up, especially on the top colas. Trichome coverage remains extremely high, with a thick, uniform frost layer from top to bottom — even the inner sections are heavily coated. Pistil development has progressed rapidly, with a significant portion now turned orange/brown, signaling that the plant is entering its final maturation stage. Despite that, there is still enough active growth to justify this last push with Overdrive. The structure remains compact and very controlled, which results in a dense canopy. While this limits some lower bud development slightly, the overall quality is consistently high throughout the plant. From this point on, it’s all about finishing strong. Estimated time to harvest is approximately 5 days, followed by the final flush phase. The plant is clearly approaching peak maturity — the finish line is now in sight.
Likes
151
Share
@BioBuds
Follow
Yesterday I discovered that, in order to change my timer, I didn't put the clock back onto it. Now they had 3 hours more light on the third day of flowering. Exactly the kind of oopsies this grow really doesn't need. But it happened and all back on a normal schedule, but I hope the OHS en GG4 aren't affected by it too much... One accidental re-vegging is more than enough for a year. Also, these sensitive strains can hermie on me for lesser reasons so from now on I'll be checking for male signs daily. The XTraKush is performing as advertised, with enormous stretch, these plants can go 10 ft up according to the breeder. So I'm tying them down and managing this to fill out the space. With all the stuff going on, this 'underdog' strain might even prove most resilient, when all is said and done. They seem to respond really well to the SP-3000 light and If you are in the market for a new light, consider this option from Mars Hydro. Thank you @MarsHydroLED for letting me try it, it is a dream of a light. I compared it to my old light again and PAR values are not even in the same ballpark. Thank you for checking my diary and taking the time to read my adventures! Hug Bud
Likes
11
Share
The first one was harvested today. It looks great and smells great. The buds are rock hard. Wet weight is 448g the other two plants still need 1-2 weeks but I'm keeping an eye on them :)
Likes
1
Share
just filling up nutrient solution, adjusting light and took some small leafs away. Easy grow until now. Hope it stays this way and getting a nice purple pheno. Ordered a fan to get some air movement inside the tent. When the leafs lay on top of each other you get wet spots. Hope it arrvies soon. Update 27.06 Fan arrived and also Plagron Green Sensation and Power Buds. Used 1ml/L. Will Change the whole solution next Weekend. ————————— Deutsch Nur Nährlösung aufgefüllt, Lampenabstand geregelt, ca 35cm und ein paar kleinere Blätter entfernt. Düngeschema wie bisher. Bis jetzt läuft alles glatt, hoffe bekomme nen schönen purple Phänotyp. Einen Clipventilator bestellt für ein wenig mehr Luftbewegung wenn die Blattmasse zu dicht wird und aufeinander aufliegt. Es bilden sich dort sonst feuchte Stellen. Hoffe der kommt morgen wenn DHL es nicht vermasselt. Update 27.06.: Ventilator ist da und dazu Plagron Power Buds und Green Sensation, 1ml pro Liter direkt in den Eimer gegeben. Tausche die gesamte Lösung nächstes Wochenende.
Likes
110
Share
ACTUALIZACIONES A DIARIO!! Miles de gracias al equipo de Royal Queen Seeds y a @James por proponerme esta aventura tan trepidante y poder conocer de cerca las nuevas F1 y sobre todo a la gran Titan F1. Espero que lo disfruteis y os sirva como referencia. ¿Qué piensas cuando lees la palabra “Titán”? Hay quienes la asocian con los hijos de Urano de la mitología griega. Otros saben que Titán es la luna más grande de Saturno. ¿Y entre los cultivadores de hierba? Estas personas reconocen a la Titan F1 como una variedad de marihuana con una genética de vanguardia. Se trata de uno de los primeros híbridos F1 autoflorecientes, y es una variedad pionera que ofrece productividad, resistencia y algo completamente nuevo. La Titan F1 deleitará tu olfato durante la fase de floración y más allá. Esta variedad autofloreciente ofrece un potente perfil de terpenos compuesto principalmente por mirceno, farneseno, ocimeno, pineno, bisabolol y limoneno. Gracias a MarsHydro 😊🙏 por darme la mejor luz que hay en el mercado. La marca numero uno en focos 💡, carpas de cultivo ⛺️, extractores 🌬️ y demás aparatos que necesitas para tu cultivo. Para esta aventura arrancaremos con 💡Mars Hydro TS 1000 Full Spectrum LED Grow Light 150W Regulable y 1 semilla autofloreciente a un ciclo de 20/4. Verdaderos 150w con este TS1000, la mejor luz de cultivo LED para principiantes. Ofrece una luz adecuada para 2-4 plantas 🌱. Su precio razonable, la marcada mejora del rendimiento y el control variable de la producción la hacen amigable para los nuevos cultivadores. Todo un tesoro para cualquier cultivador que este comenzando. Usaremos para esta aventura una carpa de 60x60x90, MarsHydro una carpa para los más exigentes.Con una solapa de cremallera mejorada, dobles cremalleras de metal con forro,reflectante diamante tipo Mylar, postes de metal para una estructura mas solida, no se puede pedir nada mas. Garantizando una respuesta en solo 24 horas tanto si has usado antes la marca como si no. 🌻🚀 Consigue tus semillas aqui: https://www.royalqueenseeds.es/semillas-de-marihuana-hibridas-f1/624-titan-f1.html 💡 MarsHydro TS1000: https://www.amazon.com/gp/product/B07PLY1WKK ⛺️ 60 x 60 x 90 MarsHydro: https://www.amazon.com/dp/B081PN2QDN/ Sexta semana de floracion, las planta ha terminado de estirar, las ramas laterales han estirando junto con la cola central y se muestran los futuros cogollos, es una planta muy compacta y he tenido que quitar alguna hoja baja para evitar la aparicion de algun hongo. Se muestra una gran cola principal. Es la genetica que mejor ha respondido, por no decir la mejor. Felicidades Royal Queen Seeds y MarsHydro 😁. Los cogollos han estirado muy rápido y se ha formado una larga cola principal con muchos cogollos en las ramas laterales, continua cargandose de resina. Las flores empiezan a engordar. 📆 Día 56 : Riego con nutrientes EC 1050 📆 Día 57: Riego con nutrientes EC 1150 📆 Día 58: Riego con nutrientes EC 1150 📆 Día 59: Riego con nutrientes EC 1150 📆 Día 60: Riego con nutrientes EC 850, se aproxima el lavado de raíces, esta Titán es realmente rápida, con largos cogollos densos y llenos de resina . 📆 Día 61: 📆 Día 62:
Likes
1
Share
WEEK 31 March-7 April. I just finished all setup afteer transplantation and so far all is working fine. Now she is comfortable and has plenty of space. I'm very proud of my AQUALOOP homemade system, that works perfectly. I'm going to increase nutes until 1.8 / 2.0 EC and go to make her blooming in a couple of weeks. Update 09/04: I've made a big defolation and strong LST. I decided to start soon the blooming stage, maybe during the WE.
Likes
32
Share
@Hawkbo
Follow
Day late on the update, pics/vids were taken on time tho just been a crazy week of harvests and trimming and keeping up with these. I linked up with Rain Science Grow Bags on Instagram and got them to offer all my followers and friends a discount of 10% off entire order from their site with the code ' bangdang ' so if anyone is in the market for a pot upgrade use that code. I got them in the mail 3 days after I ordered. Reason I went with Rain Science is because they offer identical air flow for rapid growth as the radicle bags, just using a different material and a tighter knit so water doesnt flood out the sides during feeds and when you pick these up when the coco is dry, it wont fly all over the tent like with the radicles. They're the optimal bag for autoflowers especially. She is showing some purple now, I feed this one a slightly lower ppm than the others she doesnt need much. I've been about 200ppm lower than I usually do with the soil blend and still gettin burnt tips.
Processing
Likes
14
Share
@Heisenbud
Follow
Holy growth! All these ladies grew exponentially since my last entry. I even left them for a weekend without any issues. This week I decided to start on my second round of nutrients by including Fox Farm Grow Big. I also added an Exhale Co2 bag for additional growth support. Will have an update next week. Thanks for viewing! -H
Likes
8
Share
Germinaron perfectamente! Se pasaron a sustrato de 70% coco 30% perlita De momento no se añadió calcio ala base de 260ppm de agua corriente de la llave
Likes
25
Share
@Haoss
Follow
I gave this beautiful girl a topping, LST, defoliation and a trim, she is feeling great 💚🌱