Likes
Comments
Share
Hey guys whats up.. so i was qondering with these 2 gorilla runtz what everyone thinls.. if they are ready or not.. we are in week 9 going into week 10.. im throwing in some pics and video to watch. Also cjeck out my Instagram for more in depth look at these grows.. thabks alot guys..!!! Lmk do2n below ill be looking out!!! 1 more week ?? Only_dankzz4200
Processing
Likes
9
Share
I'll end up doing some more LST and probably maybe flip to flower later this week.
Likes
4
Share
@Smev1337
Follow
this week is starting off strong with the veg phase and they are enjoying the soil a lot, no nutrients given by hand just all in the soil from the Plagron All mix 😄 all going good so far 😅
Likes
6
Share
This 3 ladies are big! They have achieved a beautiful structure, very bushy full of bud sites everywhere, this plants are very awesome to apply lst, the secondary branches tend to stretch a lot! However I'm growing this strain with another 8 strains in SOG so I just applied a selective defoliation and they are ready to develop some nice colas! I'm just growing in recycled soil from my previous grows re amended with FLO Living soil blend snd just water!
Likes
131
Share
@Roberts
Follow
Just cut down the Miller high life bottle grow with QP. Was a really neat micro grow. It got much bigger then I expected. Was a pain to get started, and growing. Finally got it. The Unit Farm UF2000 worked great. Thank you Unit Farm 🌱 I will be back when dried to weigh out. Happy growing 🌱🌱 Thank you grow diaries community for the likes, follows, comments, and subscriptions on my YouTube channel. 🍻🌱👍 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Processing
Likes
8
Share
@4F1M6
Follow
I started germination of 1 Gorilla Zkittlez bean on 29/12/2020. I pre moistened my rockwool cubes with ph balanced water to 6.4. Made sure the plug was just damp and not soaked. Using a small wooden dowel I increased the size of the plugs pre made hole. Than I sowed my bean into the hole. Ripped off a small piece of rockwool and mulched it up. Lightly filled the hole in with the mulched rockwool. Than stuck the plug into a misted humidity dome, to complete germination. Shouldn't take anymore than 4-5 days to see a sprout. Once I see some cotlydon leaves bursting to the surface. I will get the plug planted into some 1 gallon pots. Plus get this lady situated into her home. Cant wait! Some Background information on my experience with Gorilla Zkittlez. I've grown this variety out twice so far. Once in a 15 gallon container which became a super branchy beast. That yielded a large amount and filled up it's own 4x4 tent with a little training. The second and most recent time was in a 1 gallon SOG grow. She also flourished in a fast flip SOG grow banging off a fat head frosty main cola, with a few satellite buds. Very adaptive strain and seems to flourish in any environment and any size space. Looking forward too my 3rd adventure with Barneys farms masterpiece.
Likes
7
Share
Welcome to Flower Week 7 and harvest of Sensi Seeds Karate Kid I'm excited to share my grow journey with you from my Sensi Seeds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! Karate Kid got a Hard Start and also a lot of Problems After transplanting in her 16litre pot as the only Strain from this Round For this Project , I’ve chosen the Feminized Photo Strain Karate Kid : Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Sensi Seeds • 💧Strain Info : 25-33% • ⏳ Flowering Time: 8-10weeks
Likes
22
Share
@J_diaz420
Follow
110 días en total con 50 días de vegetación y 60 días de floración termina este hermoso y oloroso cultivo!! Contento con la experiencia, sin duda estas plantas mostraron el linaje de sus padres, creo que con menos tiempo de vegetación me hubiese ido mucho mejor, pero feliz ya que estas plantas mostraron un engorde 100% de sus cálices hasta los más bajos y eso me encanta. He terminado esta semana a pura agüita y como se puede ver en la decoloración de las hojas el flawles finish y el lavado de raices ayudaron a que las plantas coman sus reservas, las hojas muestran quemaduras en los bordes por que las mantuve a alta temperatura con la iluminación a tope las últimas 3 semanas. Al fin he terminado y me encantó el resultado Ahora a cosechar!!
Likes
18
Share
@emanresU
Follow
16th June More info on that day in week 8. 18th June 👉[550W @ 28C @ 58%]👈 550W seems pretty good. Safer option then 600W. I don't see the shroomy to grow bigger so I'm watching closely. When the veil gonna start to break, Im gonna cut the shroomy, leave the mycelium and repeat if needed. The plant where the shroomy is, lookin crazy good. SHOUT OUT TO T-KIEF FOR SHOUT OUTING ME AT STREAM! 3NT PRODUCTION OFFICIAL (follow them on YT motherTrufkcers!) Some pics for those who likes 19th June [HOT @ HOT AF] Fuck those who discriminate.
Likes
4
Share
A week before chop super big and heavy buds sticky as hell currently in flush mode so starting to fade slowly love it
Likes
101
Share
@DevilsBud
Follow
10/10/21 new week for Afghani Gold Growing almost a month now did some topping last week and today started to LST the main everything going great so far plants loving the new FC-4800 so as i 🤩 absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely 14/10/21 Growing very nicely giving them the watering and nutrients when they need it . I am trying to understand plants better by looking at feeling soil etc instead of a regiment. And learning we do every day because bin growing in 11L pots but now in 8L pots so that means that there gone be smaller then my first grow . But hey got now 12 plants going on and not 4 so that will help lol 15/10/21 Did some small defoliation and some of them get light penetrating better visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter.
Likes
97
Share
@CANNASIM
Follow
GENERAL COMMENT The SKR is dry and starting the cure in jars, and the NL is done. RQS NORTHERN LIGHTS AUTO COMMENT. This is the final week, next time will be the harvest, this girl just got mature from a day to the other, lost 70% of the top bud due to rot i haven t seen. So i could get virtually 30-40% yield from this girl Without the locks or rot, anyhow still looking ok as far as harvest, quality will be a bit compromise, not the end of times though lol! 🙃👊🏻👍🏻
Likes
3
Share
@brpet
Follow
Trichomes are turning amber slowly. Had some pH issues which the leaves did not enjoy. Also cut back on the EC - down to 1.3 now. Harvest next week!
Likes
21
Share
Cosmic Bloom in Motion 🌙✨ The Auto Moon Rocks from Divine Seeds has officially reached Week 2 of flower, and she’s showing exactly why I was so excited to grow this strain. Her structure is balanced and sturdy, her leaves a vibrant green, and her early bud development is already looking frosty in the making. Watching her respond to training and environmental fine-tuning has been a real treat—this girl’s resilience and vigor are simply next-level. This week, I had the pleasure of capturing her progress in another Growlapse (timelapse) video, and it’s mesmerizing to see her day-by-day transformation. The way she stretches, shifts her leaves to chase the light, and slowly begins stacking pistils really brings her personality to life. You can literally see her reaching for the stars—quite fitting for a strain named Moon Rocks. A big part of her current success has been my latest investment: a new 5L humidifier from MarsHydro. This piece of kit has been a game-changer, keeping my humidity perfectly stable without flooding the tent or creating uneven pockets of moisture. The result is healthier leaf respiration, optimal transpiration, and that consistent environment plants thrive in. Coupled with careful monitoring, I’ve been keeping her VPD between 0.9–1.2 kPa throughout the day, which she’s responding to beautifully. Nutrient & Environment Notes for the Week: 🔸 BioBizz Grow – 2 ml/L 🔸 BioBizz Bloom – 2 ml/L 🔸 BioBizz TopMax – 1 ml/L 🔸 CalMag – 0.5 ml/L 🔸 pH: 6.1 🔸 EC: 1600 μS 🔸 VPD: 0.9–1.2 kPa 🔸 Dechlorinated tap water for all feedings 🔸 No compost tea this week—scheduled for next The Divine Seeds genetics are truly living up to their reputation here. Even though their official grow guide suggests avoiding topping, I went against that advice early on—and I’m glad I did. She handled the stress beautifully, bounced back quickly, and now sports a wonderfully even canopy with multiple strong tops ready to bulk up. If her first two weeks of bloom are anything to go by, I expect dense, resin-packed colas that will make her name proud. For now, I’m just enjoying watching her in the Growlapse—each frame a reminder of just how fast and beautifully she’s evolving. 🚀🌿
Likes
28
Share
Hey everyone ☺️ Both phenotypes are great 👍. The leaves look like a nice sativa 😍. Because of training I am still thinking about it because for some time now I have wanted to do one round completely without topping etc. I will decide that in the next 1-3 weeks 😀. Both were poured this week with 1.3 l. I'm really excited about the coming week and until then I wish you all a lot of fun with the update 😃. Stay healthy and let it grow 🍀🍀 You can buy this Strain at : https://www.royalqueenseeds.de/feminisierte-hanfsamen/115-amnesia-haze.html Type: Amnesia Haze ☝️🏼 Genetics: Original Amnesia Haze 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
61
Share
Plants were growing so fast I snapped the main heads on 4/5 at a 90 degree angle and they have bounced back already. These are growing so fast I am going to have to mount the light directly to the tent bar on the roof of the tent. All of the plants are showing sex but one is showing it’s sex half way up a branch instead of at a node and the bract is separated from the ovule as shown in the last picture, very strange mutation. Apart from that all in great health and looking promising