I am really Happy with this Strain, it's growing so beautiful, this week she Streched so much and started now to pack up as well. You can see even the first signs of frost coming up. I hope you Like my Grow. Im looking forward to some beautiful Buds in the near future !

Did a bit more LST but the branches are very woody so won't bend much. Steady as she goes.

The Runtz auto girls are doing 😊. They have settled in and are fattening and stacking nicely. They are only about 16-18 inches total, but have some nice fat buds, should be some good weight. They are starting to develop some frost, but are very greasy to the touch 🤤 Trying to keep them in a sweet spot so they keep developing. RH around 55-58 % and Temps between 77-80 degrees. They are in week 8 now, and suggested harvest is about 70-75 days… Happy Gardening 🇨🇦👊❤️🌱

So the bigger one I keep under watering it’s drinking a half gallon every two-3 days and I’ve never watered this much so I keep hesitating and wilting her other two are doing amazing switch nutes to the geoflora they didn’t respond well to the advanced nutes so we will see what happens one is actually flowering finally one is barley starting and the other hasn’t and it’s day 42 I’m kinda confused started silica on 1/4 so hopefully they like it they are looking good tho my canopy is staying level for the most part I’m happy with this grow so far

Week 1 from germination! Fastbuds - Stardawg Auto Light cycle: 18/6 Watering when dry Light: ViparSpectra XS2000 at 50% Everything is going well thus far! Excited to see how she grows! See you all next week

,,,,

Harvested 5 out of 7 pics and videos soon..... loading.....

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Not a whole lot is happening this week, still having some PH issues in the medium, I believe this is from the microbial mass I added a while back. A microbe product, PH going into the medium is around 6.5-6.8 and coming out is between 5.5-5.8, so something is acidifying it up. Also noticed the runoff last week was a bit higher at times. So lowered the feed down quite a bit, going in at 1.4EC vs 1.8 will bump it up to 1.5 and 1.6 in the next few weeks. I also added in a bit of a PK booster. nothing to crazy only 60ppm worth on a total allowance of 700PPM Lights now running at 100% with V1 spectrum, decided to go with 100% now vs after stretch, will see how it works out. Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ + https://www.emeraldtriangleseeds.co.uk/ Facebook: https://www.facebook.com/medicgrowled + https://www.facebook.com/OriginalETS/ Twitter: https://twitter.com/medicgrow + https://twitter.com/emeraldseeds Instagram: https://www.instagram.com/medicgrow420/ + https://www.instagram.com/emeraldtriangleseeds/ YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow + https://growdiaries.com/grower/emeraldtriangleseeds https://growdiaries.com/seedbank/emerald-triangle-seeds

She is almost ready the buds are getting dens and covered in crystals

Been a little behind on updating this diary sorry, decided to go ahead and throw this lady in the flower tent as well to make room in the Veg tent! Can’t wait to see how this looks at harvest! Thanks for following friends & happy growing!✌️🏼🤙🏼🌱

8/28/2022 - 21 days since my little girl sprouted from seeds🌱 The third week of vegetation of my Mandarina XL 🍊🍊🌻 Nutrients: Jungle Indabox - I had to adjust the dosage, after the first dose of nutrients, the lower leaves of the plant lightened a bit, this was especially visible on her sister Orange Sherbet Auto, which burned the tips of the lower leaves - after this week I reduced the dose by half 🍃🍃 Hesi: Hesi Root Complex I give this root stimulator for root support, although Jungle Indabox also supports root growth, namely: Jungle Urban A - (N-P-K) - (2-1-6) Everything for healthy growth and formation of the root system Atami - ATA Calmag - I missed completely Advanced Nutrients - Bud Candy - I also adjusted the dosage by half 🍬🍬 Pre-flowering: This week the classic white hairs indicating the female gender appeared on the stem 👩‍🌾👧🏼 Light: Mars Hydro TS1000 - really great lamp with sufficient lighting and energy-friendly 💡💡 Training: Topping: I usually top in the third week of the plant's life, just like this time. However, now the girls are very advanced in growth, so they will have more main branches 🌴🌴 LST: Two days after topping, I anchored the lowest branches to the ground with metal clips, tied the higher branches with a string towards the edges of the flower pot, so that the light would shine on each of them 💡💡 Defoliation: In the next two days, I cut off all the large leaves that were shading the branches 🌞🌞 The girl is no longer a child, she is a strong young lady, full of branches and leaves. Its color has also changed, it is now deep green again. The stem is coarse, so I assume a strong root system. Out of all 4 girls, 🌲🌴🌾 is the tallest Thanks for the likes and you can follow me on Twitter 🐦: @ Targona666 See you soon 😍

10/13/17 Day 72 Been flushing for past 5 days. Gonna flush for 5 more days then harvest time!!!! Heavy watering everyday to keep up with this heat..... if I don't water she's gonna wilt..... mahalo for checking her out. Aloha.

Caught the start of what looks like a nutrient deficiency. Gave the plant a good soaking with a cal-mag and microbial solution. Will start adding molasses to the mix this week.

Schönen Sonntag und 3. Advent euch =) ! 🌱 Wochenupdate Die Woche lief mal ohne Drama, zum Glück =D Ich habe kurz nach dem Stretch alle Maßnahmen eingeleitet, um das Canopy sauber zu formen. Die ersten sanften Klima-Anpassungen sind erfolgt, und wir bewegen uns auf die Blüte zu – aaaaw yeeeah =D Wie ich ja bereits erwähnt hatte, wollte ich nach dem Sonden-Fix erst einmal visuell beurteilen, wann der Stretch wirklich vorbei ist und wir final auf die Meshes sortieren 😊. Die Sonde läuft inzwischen wieder zuverlässig, aber zu diesem Zeitpunkt konnte ich mich darauf leider noch nicht voll verlassen … Ich habe also noch einen weiteren Tag trainiert und bei jeder Kontrolle darauf geachtet, wie weit sie über das Netz drüber sind und ob es sich dabei um echten Stretch oder nur um Rebound vom Runtertrainieren handelt =) Dienstag hatte ich dann deutliche Anzeichen, dass wir endlich durch sind 😄 Ab hier habe ich jeden potenziellen Trieb auf ein Mesh verteilt und die, die etwas zu weit waren oder noch gebogen ins Netz zurückgeholt 😁. Als das Canopy „locked“ war, habe ich ihnen erst mal ein wenig Ruhe gegönnt. Da ich nach 12 h kein Zeichen von Stagnation durch Stretch-Erholung und Umverteilung feststellen konnte, konnte ich es nicht lassen und habe das komplette Canopy defoliert =D Der Gedanke dahinter war einfach, so früh wie möglich viel Licht an die jungen Budsides zu bekommen 😄 Jedes Blatt, das Schatten geworfen hat oder keinen direkten Nutzen hatte, wurde entfernt =) Sie haben es mir direkt bei der nächsten Kontrolle gedankt 😁 Hier habe ich dann das erste Mal echt mit mir gehadert. Die Frage war, ob ich jetzt nach Lehrbuch fahre und ihnen ein paar Tage Ruhe gebe oder ob ich direkt weiter im Programm mache und die Under-Canopy-Defo hinterherschiebe. Es wäre schon ein Traum, direkt zu Beginn vom Aufbau einen guten Energiefluss zu haben =D Die Ladys standen absolut vital und haben förmlich dazu eingeladen … also habe ich natürlich direkt durchgezogen und direkt unter dem Netz defoliert =D Hier wurden alle Spaghetti-Triebe und alles, was nicht oben im Netz angekommen war oder kein echtes Potenzial hatte, entfernt. Alles, was geht, soll ohne Umwege in die Tops gehen. Und bitte kein Popcorn =D =D Anschließend habe ich noch die Luftzirkulation angepasst, damit unter dem Netz wieder ein schöner Luftstrom entsteht =) Man sieht sogar wieder, welche Pflanze welche ist =D ! Jetzt geht’s auf in die Blüte – bin gespannt, wie es weitergeht 😊 🌱 Pflanzenstatus & Training Alle machen sich gut =) Bei Notorious habe ich das Gefühl, sie stretcht deutlich buschiger als die anderen – sehr viele brauchbare Triebe, wirklich eine tolle Scrog-Plant 😁. Bei Purpz ist mein Eindruck, dass sie deutlich mehr versucht hat, nach oben zu kommen. Hier muss man wirklich hinterher sein, wenn man sie sauber scroggen möchte. Blueberry Cupcake – absoluter Performer 😄, damit habe ich aber auch schon gerechnet bei dem, was ich über die Genetik gelesen und gehört habe =) Zu guter Letzt das Sorgenkind Guzzlerz: Hier wird auf jeden Fall noch mal was kommen in Zukunft. Leider hatte ich massive Probleme mit der Keimrate. Die einzige, die aufgegangen ist, ist schon mit einem Keimblatt zu wenig ins Rennen gestartet und konnte einfach nicht so gut hinterherkommen. Trotzdem füllt sie eine kleine Ecke im Netz und sieht auch sonst im Vergleich top aus 😄 – nur eben kleiner. Da werde ich auf jeden Fall noch mal testen, wie ein guter Seed performt 😊 ⚙️ System Nach wie vor selbes Vorgehen mit Top-Ups =) Aktuell brauchen die Ladys deutlich mehr Wasser als Nährstoffe, weil nach der Defo und dem Canopy-Sorting der Wasserverbrauch durch die Auxin-Umverteilung und die erhöhte Transpiration deutlich ansteigt =) 1,1 kPa VPD 700–800 ppm CO₂ im Durchschnitt EC der Lösung wurde auf 1,9 EC erhöht 1000 PPFD Vielen Dank mal wieder fürs Lesen und die Anteilnahme, nur liebe für euch =) Eine schöne Woche =)

Okay sooooo big big sighhhh! I’ve been dreading making this post so I’m sorry I’m behind 2 weeks. I had to go outta town for 8 days. I had everything set up for my brother to take care of the plants. It was a really hot week the week I was gone and these plants were taking a beating and started to get burnt from the heat! One plant died and I’m super sad about it. But we living and learning out here! I have tried to trim the dead leaves without taking too many fan leaves off so I don’t shock em more. All last week was surviving giving the plants a little over a gallon of water a day! Doing some of the nutrients every day but not all. I like to run water in Between the nutrients. But with coco coir I’m not too sure if it’s needed. “Learning over here” so ya thankfully it’s been cooling down and I’ve learned some new tricks to cool the tent off! I got a air water cooler that’s blowing cold air into the tent and my 6” duct sucking out hot air. Things are looking better! One more week with nutritions then a week of flush and Harvest is what I’m thinking. Any suggestions thoughts or ideas for me! I’d appreciate it!

DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

March 8-15th: This week had moderate weather with some overcast and strong winds. The Plant did not have much of a shock after transplanting and her pistols are growing in more as the days go by. She is also getting pretty tall for being on a windowsill. Going to get some Atami Bloombastic for her flowering stage and hopefully we see good results. Any advice is welcomed! 😊