Another week done. Hard to see progress day to day but just looking back at photos it's easy to see her moving along. It's my weekly ritual, photo, measure, smoke then update diary! So... She is still getting 1.5L each time i feed or water every 2 to 3 days. Increased the bloom nutrients further and decreased the grow to minimal. Removed a few leaves blocking sites again. Also a couple poking into the fans. As for lst, i slighty tweaked the 4 middle stems. The rest would snap with any bending below the top 40mm. Temperature spiked to 34 degrees in the tent for a few hours today but luckiky was watered last night. I think that helped her through those tough times. If she was almost dry and then had those temps i think she would be a bit annoyed! I was helping my brother move house and was a sweaty mess! Bet she was too and definitely appreciated my lights out being 1pm til 5pm. If it happens again and im home i will treat her to some ice packs by the intake again. :D All seems good overall. Can't really complain about anything. Last week i mentioned how she didnt smell. She did smell if you rubbed her trichomes and smelt your fingers. But just putting your nose to her was only a plant smell. Now, she has just started to have a smell of weed. I have a water pump and another timer to water her while i am away. All tested and after a bit of playing around i can feed 1.5L in 1 min :D On to another week that i am as excited for as the last. Thanks for checking it out P.S Off to visit our remaining 2 outdoors tomorrow. Will get photos and upload next week. Fingers crossed all is good lol. (I say our, the outdoors grows were/are 50/50 with me and a close friend).

Wow she went crazy this week! A big change from last week. Lets see how long she will keep growing! 💪

These are strong little autos! I got them topped last week and they are re starting to flower. They are under a little 90 watt HLG and I think I should be able to move them into one of the main tents as the timing is totally perfect with my others finishing just as these go into flower. I’d rather be lucky than good ;)

The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍  

Ahoj.Začíná nám druhý týden květu.Je to prales.Ohýbám zatím listy pod sebe.Ať to roste,přátelé. :)

Did a full leaf strip on everything this week, the pics and videos were taken 2 days ago I just havnt got around to uploading them. Everything bounced right back after the strip but the pots arent drying out as fast and humidity went down a little bit. Use the code bangdang for 10% the following sponsors.. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led

She's unstoppable. Looks like we are about to be in pre flower. It's show time.

Battled with height of lights. At this point I Literally have no more head room.Lights are at the highest point! Monster of a Plant she Is! The Marathon Continues! ⬇️⬇️⬇️ 8/23: Mixed new batch of nutes today. Week 8 Mid Bloom mix. 8/25: To force flowering I switched LEDs to a 12/12 light schedule.

🍬

Top fed power bloom and glacial rock dust again. The pot really filled out nicely, great stacking on the Banana Jealousy. I'm excited for the weeks to come. Day 14.

A strain I’ve been very keen to get going! AK is a real classic and an iconic strain for me, I’ve given her a 5Gal fabric pot with BioBizz Light mix and I’ve added some beneficial bacteria and mycorrhizal fungi to support the infrastructure development. Off to a flying start, literally 72hours from seed to saying hello. Poked her head up yesterday so Day 1 is 30/03/20. Let’s see how this week goes. I plan to keep a close eye on the environmental conditions and to ensure she’s being fed some gentle nutrients, CalMag to begin with followed by some BioBizz Grow for the extra nitrogen needed at this delicate time 👌 See you all next week, I hope with more leaves to show 🌱✌️ Peace and love, stay safe

🌿🔍 Week 7: Trichome Wonderland and Final Push! 🌿🔍 Hey there! Here's your weekly update with all the exciting developments in my grow: 🌸 The Smell is Popping: Week 7 brings a delightful aroma to my grow space. The scents are becoming more pronounced and captivating. 🌬️👃 🌈 Colors Galore: The plants are showing off their vibrant colors as the flowers mature. You'll notice burpling on the leaves and the emergence of orange and red hairs on The Queen plant. LOVE IT ! 🌺🎨 💧 pH and TDS Levels: Throughout the entire flower stage, my pH has remained steady at 6.33. That's great! As for the TDS levels, they currently stand at 750ppm and 1150ppm, providing the necessary nutrients for your plants. ⚖️🌱 ⏳ Flowering Progress: The Queen is proving to be a quick finisher, with only 46 days of flowering under her belt. She's looking almost ready, and it's time to grab my handy DIY microscope to examine the trichomes closely. Keep an eye for the desired level of ripeness! 🔍🌿⌛ 🍪 Oreo Big Stuff: Although not as far along as The Queen, the Oreo Big Stuff will need an additional week of flowering before she reaches her peak. 🍪⚡ 🌿 Zweet Og: The Zweet Og requires a bit more patience. It looks like it will need at least two more weeks before it's ready for harvest. Keep monitoring her progress and let her mature fully. 🕒👀🌿 🧐 Drying Dilemma: Unfortunately, I currently am facing a problem with drying The Queen. She's positioned on the back left side of the grow tent with a scrog, making it challenging to remove her without disturbing the others. It's a tricky situation indeed! 😬🌿🏋️‍♂️ 🌱 Future Plans: Despite this dilemma, overall, I'm extremely happy with how things are going. No herms or other issues have arisen, which is fantastic news. I'm even planning to do another run with The Queen, as I already have six clones ready to be transitioned into flowering immediately after this run. Exciting times ahead, especially since it'll be my first time flowering clones! 🌼🌿🌿 That's all for this week's update. Happy growing, lads, and remember to stay high on positivity! If you need any assistance or have any questions, feel free to ask. 🌿💪🌿✨

Quick update I know I been MIA..diary label xmas tree got deleted after losing the mother tree(die back)and about 80 cutting(weather) 1 of the cutting which I took before from the mother that died is the mother to set 1 and 2 (29)...took some cutting off of set 1 (30) jus waiting to see how rooting goes...mother tree jus hit the 2nd week of flowering will update with pic in week 2

28/10/25 Nutrients change today ( a day early ) because i didnt like how she smelt, so flushes, filled hit with 400ml sleeps then flushed, refilled and nutrients Floramax veg 1 Floramax Rezin plus Floramax flowering enhancer Floramax Organabud Green Planet vitathrive Isn cal mag Green planet massive bloom Green planet bud booster ( 30ml scoops x 4 ) Cyco platinum series silica Sleeps with the fishez ( HOCI ) Hit 4.8 e.c, changed 100L got 2.3-2.4e.c, 6.1ph. Used a lot but wanted to get rid of the Green planet line plus the ISN cal mag as im switching out to sensi cal mag Week 3 here we go! 29/10/2025 Light defoilation trying to use the scrogg net as much as possible to get as much light in as i can

Day 5 12-11-23 LED 24 Hours + Co2 500-600 Ppm Day 6 13-11-23 LED 20 Hours