This week the soil is finally a bit dryer, and I noticed the plant asking for food, therefore I applyed the solution with the described nutrients always being careful with nutrient overdose (less is more). The plant looks very healthy, and the only comment is that it has a leave with a weird shape. It could be due genetics. 😅 I used bio-pH+ from BioBizz to increase the pH from 5.64 to 6.3 (the ideal I think). Please let me know your thoughts about my plant 🙌

Very strong and already having a nice smell on the branches 😁

48 g Dry

FBA2502 Plants 1-6 Week 7 May 11– 17 FLOWER 3 Nutrients : Micro 25 ml Gro 10 ml Bloom 30ml CalMag 30 ml Recharge 10ml Green sensation 16.5ml Power buds 7.5 ml 5/11 PH 6.56, PPM 1560, temp 69 2ltr each 5/12 PH 6.31, PPM 1120, temp 68 1 ltr each 5/14 PH 6.66, PPM 1280, temp 70 1 ltr each 5/15 PH 6.66, PPM 850, temp 72 1 ltr each 5/11 Defoliation, feed, pics & videos I made 4 gallons, used 3 to water then poured the runoff back into the rest in the bucket. The next feeding, I added a gallon of tap water to residual and ph to 6,31 temp 69 & PPm 1120. Did the same on 5/14 and 15 using up the remainder of the feed solution. I must monitor and control the tent environment manually. For the past month, the humidifier has been an issue putting out way too much humidity; often leaving water in the bottom of the tent. In addition, the temperatures are also out of control. I added an AC last week to keep the temperature below 80. I finally determined the exhaust vent is also broken and has been for some time. I have been giving good reviews on the AC infinity system. However, during the time I’ve owned this tent (2 yrs), I had to replace the lights twice, fans, humidifier and now the vent twice also. Everything but the tent containment has been replaced. AC infinity does stand by their products, but they are in California, and it takes at least 2 weeks to receive the replacement. This is extremely frustrating at the critical transition to flower for my equipment to fail again. For the time being until a replacement arrives, I pulled the 4” exhaust vent from my 3x3 and hooked it up. I have the AC pushing air in and the exhaust pulling air out. This should create a neutral pressure tent environment-neither positive nor negative. I do have 3 circulating fans in the tent to move air around the plants. It looks like growth spurts have slowed and plant height has been reached. Now is the time for buds to fatten and frost up. All of them (6) are short remaining less than 3 ft. They range from 15 to 31 inches. The tallest #4 &5 and #6 have very light leaves and appear nutrient deficient compared to the shorter phenotypes. Pictures taken later in the week show fading on a few the older leaves. All are receiving the same solution and are in the same soil blend. Moving the gals in and out of the tent for their glamor shots, I bent one limb and snapped another. The bent one I taped with a splint and the snapped one I medicated manuka honey and wired it back to the main stalk. Leaves look like sativa leaning. I hope FBA2502-2 is a good daytime. I’m getting excited to see what develops in the next month or so. News Break: I’ve been informed that 2502 is FastBuds New Frostbanger and is indica for nighttime. I’m disappointed that I didn’t get a sativa to test because I really need a daytime strain. The 2 Blue Cheese plants I just grew are also nighttime. Upon opening the tent, a faint odor was detected, and some stickiness was observed during the process of defoliation. Pictures of the puffy buds even show differences. #4 &5 buds hairs are different from the others being crinklier and the others are straighter. Some like #2 &5 are showing frost on the leaves. Wow at the beginning of flower to have that much frost. They are living up to the new strain’s name. I’ve noticed that when I water, sometimes water shoots out of the side holes I the air pots. I will pack the soil firmly into the sides for future runs. Measurements: #1 15” #2 20” #3 17” #4 30” #5 31” #6 24” Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫

This plant sure is a dream to behold!! She’s starting to smell super sweet. The frost is starting to pop and the colours in the buds keep coming. I did have a top off one cola go bad due to bud rot. It’s been super humid as of late. Onward!! 😎🍿🍻🌱

Good strain

👍 👍 👍

~MERINGUE by DUTCH PASSION~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This strain by Dutch Passion is one of my all time favorite strains that I've cultivated previously with phenomenal results so I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! I'm going to things a bit different this time around. I have a brand spanking new AC Infinity 4x4 tent and was just given one of HLG's newest lights for 2022, The Blackbird! I've got this 600w monster hooked up to my Trolmaster Hydro X Controller so I've got full control over timing, dimming and Sunrise/Sunset. This beauty is going to annihilate the 4x4 for sure! 😎👍 I'm going to grow her all by herself and veg her for around 70-90 days after witch I'll install a trellis net in the tent and spread her out. Once she's recovered from her 'net training' I'll flip her to 12/12 and hang on! 🤪 It's ALWAYS been a blast for me growing strains from Dutch Passion because their genetics are extremely stable which allow me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth and they REWARD you with some of the most EPIC cultivars you've ever grown! 👍👍👍 ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~STRAIN INFORMATION**~ ~Unique USA genetics~ ~Very sweet aroma and fruity flavors~ ~Compact buds with one of the highest THC levels~ ~Quality of the flowers is top-notch with an amazing bag appeal~ Meringue has a very sweet aroma and fruity flavor Meringue is a hybrid indica/sativa strain with a complex fruity aroma that leans to the tangy side of the spectrum but a bit sweeter. It smells like oranges, mango and honey with some earthy, sour hints. Her aroma profile is also very pungent. Meringue is a connoisseur’s delight Meringue is a high-quality strain. She might not be the biggest overall yielder but the level of quality is definitely a reason to keep growing her again and again. Expect solid yields of stunning looking buds. Although the flowers can be a bit smaller, they are rock-hard and thus will still put down some weight on the scale. When handled well she will deliver you some of the most beautiful looking nuggets on the planet. The dark hues in the flowers and leaves makes the white layer of resin really pop out for an eye-catching bag appeal. Meringue is grown by crossing Wedding Cake x Animal Cookies. Wedding Cake, also known as Pink Cookies, is a USA cross of the famous Girl Scout Cookies and Cherry Pie. These 2 strains make for the intense sweet tangy taste of the variety. It is also noted for its extremely high THC content. Animal Cookies is another popular USA variety which is a child of the legendary GSC line and Fire OG. She is a clone-only variety that flowers in about 9 week and grows very dense and compact buds that can show some dark coloration in the flowers. This strain has a sweet and sour aroma with a strong body-effect that will suit the more experienced smoker. -The genetics used to create Meringue ensure the following characteristics- ~A sweet tangy aroma from the Wedding Cake ~The dense, compact and colored buds from the Animal Cookies ~High potency levels thanks to both the Wedding Cake and Animal Cookies genetics Meringue is top-notch variety with a high cannabinoid profile and an intensely sweet, pungent aroma. ~Meringue Effects~ Meringue is a crossing of 2 popular hybrid USA strains. She leans a bit more to the Indica side which is shown in the shorter flowering time and bud structure. The effect of the variety is quite euphoric with a powerful sense of well being and relaxation. When you smoke more during a short period of time you will be rewarded with a deep body stone which could give a couch-lock experience. Meringue feminized seeds vs Lemon Meringue strain Any fans of the USA Lemon Meringue variety will love the Dutch Passion Meringue. Both varieties share a THC rich high and a connoisseur flavor profile. However feminized seeds of the Dutch Passion Meringue are thought to produce frostier plants and a superior vaping experience. -The growth and flowering time of Meringue- We recommend a veg period of about 4-6 weeks for these feminized seeds. Meringue can have a bit of a slow start while showing some stretch during the latter part of the grow period. On the other hand, she doesn’t stretch a lot during flowering, so she can be a bit challenging to understand. Meringue can have quite an unusual growth pattern with leaves that have elongated stems and which are pointed upwards with some distance to the main stem. This requires the use of certain growing techniques, like leaf tucking, to make sure she receives sufficient light from top to bottom. Meringue stays fairly compact and within 3-4 weeks there is already a lot of resin on the flowers. After 6 weeks of flowering the buds start to show orange pistils, they seem to ripen quite fast. Luckily all plants show amazing resin production, making them very appealing to the eye. The flowering time is about 8 weeks. In combination with the recommended veg phase, it will take around 12-14 weeks from cannabis seed to harvest. The yield of the Meringue Meringue produces XL harvests of top-notch quality cannabis; between 400 and 500 grams per m2 is possible. The buds are really frosty and dense. Our expert advice: Meringue is the perfect strain for professional home growers or licensed producers looking for a variety with the highest possible resin levels. Buds are literally coated in layers of resin. We would recommend to look out for the plants which show the most hybrid leaf and plant structure. These are generally the biggest and best yielding phenotypes. Consider using a UV light during the last few weeks of flowering and notice how the trichome production goes into overdrive. If you’re looking for something truly unique with an amazing bag appeal then please look no further, Meringue is the strain you need! ~More info about Meringue Meringue isn’t the most straightforward plant to grow so she can be a bit challenging to understand. The thing that stands out the most is the slightly unusual growth pattern, therefore more leaf picking is necessary, otherwise the lower buds will not receive enough light. Because of the slightly larger internodal distance, buds don’t have the tendency to become really big, which could make her a bit more interesting for growers with higher humidity levels. There should be enough fresh air around these flowers though, because they become rock-hard. Buds are covered in trichomes, lab results showed all phenotypes were close to and above 20% THC, suited for hardcore smokers. ** Credit to Dutch Passion ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seed was lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which it was transferred to a moist paper towel laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Mars Hydro Heat Mat with Controller that was set to 78℉ where it stayed until a tap root emerged. ~Planted into Jiffy Peat Pellet that was hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerged from the Jiffy Pellet she was transferred to a 1qt plastic pot. As she grows I'll be moving her into larger pots along the way up until she's in her 10g fabric pot. ~Grown in a 10g fabric pot filled with Mother Earth 70/30 Coco/Perlite medium and fed Dutch Pro nutrients throughout the entire grow with de-chlorinated water ph'd @ 6.2-6.8. ~19/5 light cycle for vegetation, then 12/12 to flower with supplemental UVA added during the last weeks of flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~ Supplemental co2 provided throughout vegetation and flower - monitored and controlled by an AutoPilot APC8200 co2 controller. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/1- I soaked the seed for 3 hours in 78℉ distilled water after which it was transferred to a moist paper towel laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉. After 30 hours she had not popped open yet so I soaked another seed for 3 hours and then into a paper towel and onto the heat mat it went. 12/3- This afternoon I checked and the seed had a root that was about 1/4 to 3/8" so at 5 pm I transferred it into a Jiffy Peat Pellet that was hydrated with distilled water warmed to 78℉ with a 7.0 ph using a tine off of a plastic fork as a 'mini trowel' to make a hole in the pellet and to gently cover the tap root, leaving only the seed head slightly exposed. This method accomplishes most of the initial work the seed has to do by eliminating having to orientate itself, push it's root down and head up. By the next morning she had her cotyledon leaves opened! 12/5- Well this is Day ONE for the Dutch Passion Meringue! I'll keep her in the covered/heated Jiffy tray until I see her roots beginning to emerge from the peat pellet, then I'll transfer her gently into her 2qt plastic starter pot to begin growing. 12/7- Today when I checked her, she had roots just starting to emerge from her pellet, so tomorrow I'll transfer her into her 'starter' pot. 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙

Alles Top.Wenig Arbeit und viel Freude 💚💥

I have had a very nice journey growing her, she has given a great quality and quantity pf buds, very hard dense flowrs with a clasic strong amnesia smell that I enjoy a lot specially for the happy energetic buzz that provides you.

buds are getting fat and smell is more intense now. the watering level is low and the leaves are yellowing so i won't refill it because the plant is near to harvest. I recorded a microscope video to see trychomes (sorry for my bad pulse) but enought to see that buds aren't ready to harvest, maybe the next week.

Hello friends of growdiaries. As you can see, the difference between the two plants is enormous. It must be a question of seed genetics. flowering advances. See you soon

10/20: I foliar fed her today with some SP-90 humic/fulvic acid and kelp me kelp you. She will probably get fed again tomorrow. Drying out quickly- 10/21: I applied Axiom again today..I sprayed her with the finest mist I could produce..tops and bottoms of all leaves to the point of runoff. I fed her about a 1/4 gallon with nutes. I put another big fan in the closet and turned off the evap cooler for the night so she'd dry out better. 10/22: I used a stainless steel skewer to poke a bunch of little holes in the lower part of her fabric pot to try and improve oxygen availability to her roots. I also carefully arranged the garden so that there are gaps between all the pots. I think I'll also space my waterings a little further apart. The topsoil is drying out well enough, but I don't want her roots sitting in muck. 10/23: She's flowering now, and starting to stretch a little bit. After observing signs of nitrogen toxicity yesterday, I realized that I made another rookie mistake...(where is my head??) The new 5 gallon bucket I'm using to mix a batch of nutes must be about 2 inches shorter than the one I had been using, and I never bothered to calibrate it....which I did today. So, for the past couple of feedings, I've been mixing in enough nutes for 5 gallons, but in only 4 gallons of water!!! I foliar fed with BoomBoom Spray and gave her about 8oz of boomerang and cal-mag early in the morning, and by 5pm she looked happier. Compared to the hybrid seedlings in the space, she's got very narrow, sativa-looking leaves..should be a treat!😋 I raised the lights about 2 inches today and dialed the ac infinity's high temp trigger up to 88f for a bit to get her to dry out a little faster, so the RH climbed a little higher as well...so I also set the ac infinity's high humidity trigger threshold to 65%. 10/24: I fed her another little dose of boomerang and cal-mag, along with some bembe and open sesame. 10/25: I fed her about 1/4 gallon with everything except Grow Big. I'll flush her on Sunday or Monday with Sledgehammer and only foliar feed with fulvic acid and boom boom spray until mid-week. Then I'll give her a good douching with humic acid, myco, tricho and beneficial bacteria and bembe(molasses and beet sugars/rock phosphate/trace elements) to keep the microbes thriving. I'll go heavy with P and K later in the week. 10/26: Last day of week 4 and she's doing great! Her pot is still pretty heavy after her feeding yesterday, so it will probably be Monday before I flush her.

Grüßt euch Freunde, Langsam kommen wir ans Ende der 5 Woche! Habe in dieser Woche keinen Bio grow zugeführt und eine Verbesserung festgestellt. Dafür wurde top Max angehoben und Bio Bloom. Fahre im weiteren Verlauf nun wieder nach Düngeschema fort. Viele der Blätter verfärben sich rötlich und die Blattspitzen der sugarleafs sind lila. Hoffe dass, das dann später auch im Produkt sichtbar ist. Sind also noch einige Wochen zu gehen, Bis dahin euch allen eine gute Woche !💚

Día 50 / 15 (17/11) N/A Día 51 / 16 (18/11) N/A Día 52 / 17 (19/11) N/A Día 53 / 18 (20/11) N/A Día 54 / 19 (21/11) N/A Día 55 / 20 (22/11) Preparación del PK Booster Compost Tea by BIOTABS! Día 56 / 21 (23/11) Riego cada planta con 0,5 litros de PK Booster Compost Tea by BIOTABS! 💪 🚀 🎉 🚀 FastBuds 15% DISCOUNT code "NONICK" fastbuds.com 💦 Nutrients BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae

Sad she was ready to be chopped, but excited as hell too! 😁 I have another seed and Im already fighting the temptation to do her again! 🤣🤤 Cant wait to smoke! 💨 Ty for the 💚

Guava root gmo has some nice deep green leaves I am really liking the seed man genetics they are doing really well anything with gmo in the name will be some gas I’m exc It’s day 41 from seed and all of the plants are really thriving