The Gelato is growing regularly hopefully well. We spray neem solution + potassium soap every 3 days for protection and lord grow nourishing foliar every 15 days for leaf nutrition and co2 protection.

Very good week for the Jelly Rancher plant. The JR plant went from 3 inches to 6-1/2 inches. So 3.5 inches of growth this week...not too bad. No issues so far 😬. I pruned the plant just a little this week, took of the first, second and third set of leaves off. Not any branches just the leaves. The second and third set of leaves just get in the way...get covered in soil as they grow and not really all that useful so I just get them out of the way. Onto week 4 😁.

Day 71 - Starting week 11 and what should be this girls final week of life. She’s almost dried up and starting to show a little more amber trichs. Still planning on chopping her sometime this weekend. Day 72 - Almost ready, just some updated pictures for the day, nothing much has changed. Day 73 - Just some more pictures for today, I’ll chop her down on Saturday and looking forward to it. This girl stinks to high heaven and want to get her drying. Day 74 - All set for the chop tomorrow, she’s used up all the water in the soil and she’s about 15% amber, just about the way I like them.

Skywalker OG — Harvest / Trim / Cure Part 1 — The Giants Begin First of all, we want to apologize once again for dividing this harvest series into multiple parts. But honestly… there was simply no other way to do this properly. This Skywalker OG run became massive. Not just in terms of plant size and harvest weight, but also in documentation, photos, observations, and the amount of details we wanted to properly share with everybody following this journey. So instead of rushing everything into one overloaded update, we decided to divide the: * harvest * trimming * drying * curing * and smoke review into three, maybe even four different reports. Mainly because we are dealing with: three huge plants all with slightly different expressions, structures, and personalities. And honestly? These girls deserve proper attention. ⸻ Quick Recap — 12/12 From Seed This entire run was done: 12/12 from seed with almost no training at all. No topping. No aggressive manipulation. No heavy canopy control. Mostly: * gentle leaf bending * small adjustments * minor defoliation * and simply opening light paths where needed The rest? We allowed the plants themselves to decide. To grow naturally. To express themselves freely. To shape their own structure. And what they became honestly surprised us. ⸻ Legends Of The 12/12 Galaxy These plants did not become extremely tall. Instead… they became monsters horizontally and structurally. Massive production. Heavy flowers everywhere. Dense stacking all across the branches. Everywhere you looked: * colas * side branches * swollen flowers * branches collapsing under their own weight Support or no support… it honestly barely mattered. These girls were simply too heavy. The branches kept bunching, leaning, and dropping from pure flower mass alone. Exactly the kind of “problem” growers love having. ⸻ The Fade One thing we absolutely loved during the final weeks was watching the senescence develop naturally. Toward the end, these plants received mostly: * water * enzymes * patience And they faded beautifully. The yellows. The pale greens. The autumn-like transitions. The dying fan leaves surrounding swollen flowers. It gave the room this incredible “end of season” energy. The plants truly looked finished. Not forced. Not rushed. Just naturally reaching the end of their cycle. And visually? Beautiful. ⸻ The Flowers Honestly… these flowers are ridiculous. Huge colas all over the plant. Top colas. Side colas. Lower colas. Everywhere. And dense. Very dense. The kind of flowers where even holding them lightly leaves resin on your fingers instantly. You can see it in the photos too: our hands next to the flowers almost look small beside some of these colas. And we don’t exactly have tiny hands. The stacking came out incredibly effective too. No wasted structure. No airy towers. Just thick, compact, greasy flowers from top to bottom. Exactly the type of structure we hoped Skywalker OG would give us. ⸻ Harvest Day So finally… week 14 from seed arrived. And it was time. We harvested the first giant. And honestly, carrying this girl into the studio already felt surreal. Huge branches. Massive colas. Beautiful fading colors. Trichomes absolutely covering the flowers. Most of the trichomes sat exactly where we personally like them: * mostly cloudy * a touch of amber * and still a few clears remaining Because honestly? It is impossible to have every single trichome perfectly identical at once. And this specific harvest window gives us the balance we personally enjoy most: * potency * terpene expression * complexity * and overall effect balance Not too early. Not too late. Right in that beautiful middle ground. ⸻ Charas & Resin One thing that immediately stood out during harvest was how absurdly sticky these plants were. Simply removing fan leaves and touching flowers started building resin layers onto the gloves almost instantly. And naturally… we started collecting charas. For people unfamiliar: charas is a traditional hand-rubbed cannabis resin made directly from fresh living or freshly harvested plants. Unlike dry sift or ice water hash, charas comes purely from physically collecting the resin through contact and friction. And honestly? We absolutely love this type of medicine. There’s something incredibly old-school and ritualistic about it. Sticky. Greasy. Dark. Aromatic. Almost alive in texture. Very different from the finger hash we’ll later collect during dry trimming sessions. Fresh charas feels softer, oilier, richer, and incredibly expressive terpene-wise. This Skywalker OG produced beautiful charas too. Easy to collect. Very greasy. Very resin-heavy. Exactly the kind of resin that instantly tells you: “This plant is loaded.” ⸻ Full Plant Drying After harvest, we decided once again to dry the plants whole. Entire plant hanging. All of them. We personally love this method because it slows the drying process slightly and helps preserve: * terpenes * moisture balance * aroma complexity * and overall flower quality This first plant will now dry roughly: 7–10 days under: * 18–20°C * ~60% RH Although during the first couple of days we intentionally lower humidity closer to: ~45% RH mainly because these plants are extremely large and dense. And with flowers this thick, we prefer removing the initial excess surface moisture a bit faster to reduce risks of unwanted issues like: * trapped moisture * stagnant humidity pockets * or bud rot After that initial phase, conditions stabilize again for slower drying and proper curing preparation. ⸻ What Comes Next The next reports will continue covering: * the remaining Skywalker OG plants * their individual structures * harvest observations * drying progress * trimming sessions * cure * and eventually full smoke reviews All while still staying within this same harvest week timeline. Because honestly? Each plant deserves its own spotlight. And each one brought something special to the room. ⸻ Thank You Huge thanks once again to everybody following this journey. To the growers. To the silent viewers. To the curious minds. To the old followers. To the new followers. To the skeptics. To the lovers. To the people stopping by for just a few seconds. To the breeders at Zamnesia behind these genetics. To Plagron for the nutrients. To Future Of Grow and Lumiflora for the LEDs helping drive this jungle. To everybody creating the gear, tools, and spaces that allow growers like us to keep learning and sharing openly. And especially to the growing community itself. Because without growers sharing knowledge with growers… none of this culture survives. From grower to growers. Skywalker OG harvest series officially begins. 📡 DELETED @ 1K Please stay tuned.we never quit https://www.youtube.com/@TheDogDoctorOfficial NEW 🙏 Thank you for your patience and continued support. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube - https://www.youtube.com/@TheDogDoctorOfficial NEW Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74

Hi all hope everyone doin well and happy easter have a great weekend. I can't believe it,I survived another week without killing me babies 🤣ha. I had 2 problems yesterday don't know how serious it is or will be to plants? My marshydro inline fan stopped working just when I started needed it for the smell but thats typical,its my life in nut shell ha ill have to start charging the owl neighbours for the lovely scent they about to receive 🤣🤣how much do yas reckon is reasonable 100 euro whiff yeah haha.😂was on marshydro about it so hopefully gets sorted soon there customer service straight back on to but was using it to control humidity so ordered a dehumidifier waiting on that now.in mean time that shot up to 85 90 percent,so open flaps on tent over night and then temps dropped to 17 degrees for lights out and continued like that for few hrs then went to 22 degrees and as high as 90 percent in humidity till got home from work all good now 24 degrees 65 humidity but I haven't a clue if I've fucked it all up.please let us know if all OK. They took a massive stretch in last week though and all looking amazing 😍put light up to 100 percent 19 inches praying 🙏 leafs 🍃 so hopefully sweet spot for time being. done a bit of defoliating, bit leaf tucking were I could. sprayed a bit of canna cure jst at lights out.so to me everything looks as good as I could possible make for my first time ever even looking at a plant let alone looking after 2 of them 🤣haha Thanks all for having a look and feedback needed and appreciated wouldn't have got this far without the help ive already received so please keep it coming its badly needed ha. Enjoy plus keep growing and blazing all God knows we bleeding deserve it.ha on to next week when magic starts happening ✨️ 🙏

Note: jegliches Equipment findet ihr in der Germinations Woche . Day 22: PPFD 410 * 20h = DLI 29.52 Day 23: Day 24: + Dünger + + 0.5 Flaschenwasser + + + Rhizotonic + + + Terra Vega + + 0.6 Leitungswasser + final PH 6.5 Day 25: Day 26: Day 27: + Flaschenwasser 2.5 L (PH 7.2 EC 0.26) + + CanaCym + Final PH 6.1 = Drain : EC 1.325 Sieht bissel danach aus als hab ich etwas zuviel Urgesteinsmehr in die Erde eingearbeitet :)) Muss ich halt bissel spaarsamer mit der Düngung umgehen . Day 28: Das Wetter und die liebe Luftfeuchtigkeit :(( Manchmal denk ich das ich Outdoor growe :)) Im Video sieht man schön wie der kleine Zwerk sich selber mit seinen riesen Blättern SCROG mäßig den Wuchs in die Breite erzwingt :)) Die Blütentriebe müssen halt den Weg zum Licht mit aller Anstrengung erreichen .

So we are in week 2 of flower I ran out of Dutch pro and my hydro shop didn't have any in stock so I had to swap to canna 450ml A&B I've also added some bud blood. So today I did some defoliation to anything below my scrog net and tucked some of the bigger fan leaves to expose the new bud sites. I also raised my light a few inches to allow the ladies to grow into it. 21/5/21 The girls are growing fast I did some defoliation 2 days ago and I had to repeat today 26/5/21 Took some fan leaves off that where blocking bud sites only a small handful needed to be removed, I gave them a feed ppm 946 ph 6.3, bud sites are looking nice and healthy I've got plenty of air flow throughout my tent, have yet to notice any aroma but still very early days. That's all for now gays and gals happy growing and pleasant smoking ;)

Day 28 - Found some early nute burn on the lower leaves of Gelato, I think i'm fertigating too little and the salts in the coco is rising. From now I'm going to give 2L of water two times per day in order to re-clean the medium with much more run off.

Primera semana. De mis plantitas. Creciendo sanamente. Hay 2 que se quedaron un poco atrás en crecimiento, las 17 restantes todas parejas. Esperemos que sigan creciendo de forma normal y sin problemas.

Diese Woche war für die Pflanzen eine große Belastung, da sie in den Keller umgezogen sind. In der Wohnung wurde es einfach zu warm. Die Box hat einen Zuluftschlauch bekommen, sodass immer Frischluft von außen kommt. Die Abluft wird auch nach außen abgeführt. Der Keller wird zusätzlich mit einem Amazon Badezimmerlüfter belüftet. Die Luftfeuchtigkeit konnte somit im Durchschnitt auf 60 Prozent gesenkt werden. Bei Regen hatte ich auch schon Höchstwerte von 82 Prozent in der Box. Dazu habe ich einen zusätzlichen Handylüfter in der Box installiert, der 40 Watt hat und für gute Belüftung sorgt. Zusätzlich baue ich mir nächste Woche ein Belüftungssystem mit KG-Rohren. Ich nehme zwei Stück und installiere sie an der Zuluft der Box. Dann werden sie am Rand der Box platziert und Löcher rein gebohrt, um die Pflanzen von unten zu belüften. Die Rohre kommen auf die ganze Fläche von 1,5 Metern. Was den Dünger betrifft, kann ich nur sagen, ich bin sehr zufrieden. Die Buds werden langsam echt fett. Die Pflanzen weisen keine Mängel auf, bis auf Calzium-Magnesium, das zusätzlich über das Gießwasser eingebracht wird. Apropos Gießwasser: Ich habe mir Tropfer und ein 100-l-Autotop-Flexi-Tank bestellt. Dazu ausführlicher Bericht nächste Woche, so wie zu der ab und zu Luft. Die Lampen laufen mittlerweile auf 100 Prozent. Die Titan sind mittlerweile im Schnitt 75 cm groß, so wie die Cosmos. Diese Pflanze ist sehr durstig und bekommt mehr Wasser als die anderen und ist im Umfang deutlich größer als die Titan und Epsilon. Die Epsilon sind ca. 55 cm im Durchschnitt, haben aber die dicksten Buds. Wichtigste Punkte: - Pflanzen in den Keller umgezogen wegen zu hoher Temperaturen in der Wohnung - Belüftungssystem installiert (Zuluft, Abluft, Badlüfter, zusätzlicher Lüfter in der Box) - Luftfeuchtigkeit im Durchschnitt auf 60% gesenkt - Neues Belüftungssystem mit KG-Rohren geplant - Dünger zufriedenstellend, Buds werden größer - Calzium-Magnesium-Mangel, wird über Gießwasser ausgeglichen - Neue Bewässerung (Tropfer, Flexi-Tank) bestellt - Lampen auf 100% - Titan und Cosmos ca. 75 cm, Cosmos durstiger - Epsilon ca. 55 cm, dickste Buds !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!es fehlen noch Bilder Nachtrag kommt !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Ein danke geht raus an meine Freundin sie Übernimmt Bilder und Videos.

Now we've reached day 34. Our Watermelon Candy F1 Hybrid also suffers from a minimum of over fertilization, the fault of the grower from the vegetative phase but it has grown dramatically, it is the largest of all and we are sure it will become beautiful. After two weeks of flush we are starting to give fertilizers for flowering. Site Description ZAMNESIA SEEDS - WATERMELON CANDY F1 HYBRID AUTOMATIC: BUDS BURSTING WITH FLAVOR If you've been looking for a flavorful strain with superb genetics that's effortless to cultivate, the hunt is over. Thanks to reliable F1 hybrid genetics, Watermelon Candy F1 Automatic showcases the highest degree of productivity and efficiency. This strain takes everything you know and love about the original, and packages it in a plant with even greater potential. GROWING WATERMELON CANDY F1 HYBRID AUTOMATIC Derived from Watermelon, Candy Kush, and ruderalis, Watermelon Candy F1 Automatic is a finely tuned medley of genetics. This cultivar is fast to flourish and reliable to grow, no matter where you choose to grow. Taking just 9–10 weeks from germination to harvest, she provides a uniform growing experience culminating in a huge haul of buds for her size. Reaching heights of 65–80cm, Watermelon Candy F1 Automatic stays pretty grounded, making her perfect for smaller growing areas where space is a commodity. It also means you can fit more plants in if you have the room! Once ready to yield, growers will see a return of 400–450g/m² indoors and up to 100g/plant outdoors. Moreover, Watermelon Candy F1 Automatic is highly resistant to pests and disease, making it an ideal strain for newcomers and fans of low-maintenance cultivation. AROMAS, FLAVORS, AND EFFECTS OF WATERMELON CANDY F1 HYBRID AUTOMATIC If we haven't already sold you on the power of F1 hybrid genetics, the proof is in the pudding. Watermelon Candy F1 Automatic is teaming with terpenes and cannabinoids, making for a lively high coupled with huge flavors. Just one hit is all it takes to sample rich fruitiness mixed with sweet candies and a slight earthiness to back it up. And with an average THC content of 23%, the effects are euphoric at the start but settle into deep relaxation soon after. Whether you're chilling alone or with friends, Watermelon Candy F1 Automatic will see you right. As for fertilizers, I'm doing a small comparison experiment to finish off the fertilizers I had at home, it's not 100% indicative, it's only on two specimens but given the stable genetics I decided to try to compare the results of Plagron Vs Aptus , both excellent brands which they will certainly produce beautiful plants which are already of excellent stable genetics. In the next few weeks the comparison will be more evident now the seedlings are still very small and just potted. So seeds of all brands, in addition to these great F1 Hybrids and the entire Zamnesia line, fertilizers and everything related to the world of cannabis, you should buy them from the best online store in the sector. www.zamnesia.io

Woche 10 Blüte Woche 6 Die Money Maker von den Strain Hunters ist jetzt in der 6ten Blüte Woche. Die Blüten Entwicklung geht endlich richtig los. In der Woche habe ich die Money Maker einfach wider wachsen lassen und habe sie nicht gestresst. An der Nährlösung habe ich in der Woche wie die Woche zu vor nix verändert. Bei Fragen einfach die Frage stellen, genauso bei Verbesserungen und Tipps für mich. Danke und viel spaß mit euren Pflanzen.

The buds shine like a shooting star mad sticky too⭐️ First thing that hits me with the smell straight up like canned pineapples in syrup🤤🍍

New start of a week FLOWERING This grow i have seen it all from giants to dwarf that doesn't want to flower to a mutant call mohawk ethos you name it i gots it's lmao couple week ago trow out a male but still all that don't matter because what i have is great to me maybe not perfect but i ain't perfect either 20/4/22 The smell coming out of the tent is one tropical garden very happy so far with results and there hopefully bulking up Will be posting more photos Tru the week visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

[DAY 36] - 6/7/2022 - 29°/30° and 60% RH average; - TS 1000 set at 75% = 112 watts and 45cm away - After bending the plant has returned to about 38cm in height; - EC 0.9 / 1 - PH remains fixed at 6.4, no matter how much PH down I put in the solution, it will always return to 6.4 after few hours; ------------------------------------ SCROG TIME AND DEFOLIATION IN SEVERAL TIMES ------------------------------------ - 8 PM - Lights on and scrog net mounted. The scrog net is about 25 cm (10 inches) from the clay and I have tried (at my best) to space the individual branches in the various outer squares of the net. In the next few days I will try to better fill the free squares to try to fill the scrog net completely. - 6 HOURS LATER - I was very rude due my inexperience. Despite that, plant seems already recovered, it is drinking and the branches are already bending to seek the light. [DAY 37] - 7/7/2022 - Just removed some leaves under the canopy who won't get light. I did defoliation in different times due I wanted no stress the plant too much, I hope it was a good idea. [DAY 38] - 8/7/2022 - More defoliation - Bent branches through the net; - Added peppermint oil on the lid to prevent insects from getting into the tent; - Today temperature is cooler, which is why I decided to keep the light off for only an hour. I took the opportunity to give the plant more light after the stress of the last three days to allow it to recover faster. It will go to sleep directly tomorrow at 5 pm until 9 pm, as usual. [DAY 39] - 9/7/2022 - Mounted the carbon filter; - Tried to fix the scrog but I broke a branch; [DAY 40] - 10/7/2022 - Today I tried to lower the net but it is harder than I thought. By now the branches are stuck in the net and I was able to do very little. - I probably made it worse, Before the branches seemed to me better spaced and now I'm afraid of forcing my hand too much, I risk getting even worse. For a couple of days I leave the plant alone, it's not growing so much; - EC 1.1; PH 6.2-6.4; Still drinking about 2 l/day; - TS 1000 set at 75% = 112 watts and 45cm away from the center of the net. The branches on the sides are going up and slowly approaching the lamp, but I don't move it higher because I want a strong light to arrive in the center to allow the lower branches to rise and reach the others. We hope well - I am worried that I've stressed the plant too much, there are numerous branches (even recent ones) with a color tending to red / purple. I hope she recovers well and will try to stress her to a minimum in the next few days. For the first time I had to take care of the plant directly, handling the branches and defoliating. Surely someone more experienced would have done a much better job than mine. Get back soon HULK [DAY 41] - 11/07/2022 - EC 1.3; PH 6.4 - Temp. 28° / RH: 50%; - Today I started raising the EC from 1.1 to 1.3 and the plant reacted well. I used the solution prepared 2 days ago with: demineralized water EC 0 / 0.4 g/L SILICATE / CAL-MAG up to 0.35 / A + B + HYDRO BOOSTER + 1/2 dose of BLOOM STIMULATOR for a total of = EC 1.3. Having to add 2 liters to the DWC, I raised the EC of the made solution from 1.3 to 1.7 with the only addition of CAL-MAG => TOTAL EC IN DWC = 1.3. The plant seems to react well, after 6 hours the water level has dropped and the EC dropped from 1.3 to 1.2. The plant shows to be hungry, especially for CAL-MAG. Over the next few days, I will keep EC levels well monitored and act accordingly. - TS 1000 set at 75% = 112 watts and 45cm away from the center of the net. The branches on the sides still are going up and slowly approaching the lamp. I start to see very few leaves with yellow tips, if it continues like this, I move the lamp 5 centimeters away from the center; - For the moment I stop with the defoliation for 10/15 days, on the advice of @SwissKush [DAY 42] - 12/07/2022 No update. I'm fine, don't worry.

SHERBERT QUEEN AUTO / RQS WEEK. #10 OVERALL WEEK #5 FLOWER This week has been a good week for this lady her buds are getting dense and she's smelling good. Stay Growing!! Thank you for taking a look it's much appreciated!! Thank you ROYAL QUEEN SEEDS!! SHERBERT QUEEN AUTO / RQS

罐子里是之前最顶端的芽，被我烤焦了……