I had the lights at the suggested level from the company we got it for seedlings and it started to burn them. We have a 750W LED light and it was set to 40%. We turned it down to 30% for the first few weeks.

Just started and I see big opportunity with this sweet lady I hope it will be bigger than first one Hope my experience will help ERROR UPLOAD PHOTO ALL THE TIME CAN'T UPLOAD PHOTOS

I am happy to announce a new beginning! This time there will be new genetics and seed banks that I haven't tried so far, so I'm very curious to see how it will turns out!🤞🏻☺️ Also it will be the second round for my beloved Runtz Muffin that i promised to bring it back.😁 Now I just need to wait until these seeds will go for 18 hours in a glass with water and then I will transfer them to the paper towel to make them germinate properly and finalize the process in their pots once the sprout stretches by at least 2-3 cm. ☮️💚 Happy growing and positive vibes to everyone 🙌🏻💚 ⚠️ 16-05-21 UPDATE ⚠️ Today i put these little girls into their 1L pots. Now I will let them grow here for at least 10-12 days before transplant them into the final pot (11L) ..See ya at the next update! Happy growing to everyone! ☮️💚 ⚠️ 17-05-21 UPDATE ⚠️ So the first ones to break the soil and reach the light was the Mimosa, K-Mintz and the Meringue. the Runtz Muffin is continuing to grow but still has not removed its seed from its head, which continues to be the slowest and still with a small sprout / root.. I'm sure that in the next few days it will be great together to her little sisters. That’s all for today..😊 See ya next time fam ☮️💚

Hello everyone week 5 of flower has passed for this Mint Jelly auto ❄️ For the feeding schedule i stopped feeding Power Roots and Pure Zym and started feeding Green Sensation 0,5/l Mars hydro FC-E6500 75% have a great day and wish you all happy growing 😎👨‍🌾🏻

I learned a bunch growing these plants and the harvest was well worth the effort it took. 300 watt actual power consumption for lights so I think I'll give this strain another run in the future. The smoke is smooth the smell is potent fruity with a touch of citrus. I dried to 67% then placed buds in a plastic bin for one week burping 4 times a day for 15 minutes then Jared at a humidity of 63% with 62% bóveda packs for one week burping twice a day . After 10 days of I exchanged the 62% packs for 58% packs. Burns smooth and tastes great but I'm going to see what it tastes like in a couple more weeks.

right now I'm just waiting on some pollen sacks and some pollen but other than that plant looks healthy as we can see and I also changed my lights and my schedule to 12/12 . Feeding big bloom and tiger bloom with a lil secret ingredient and lots of bat poo noticed a seed think we talked about that before looks like imma plant this seed if my pollen sacks don't kick in on time which time is almost up.al I'm also waiting on my crystal to start forming I see it coming In but has a few weeks to fully brighten up the night recording

Loving her seed production output…

📆 Semana 7 Los cogollos alcanzan su máximo volumen y comienzan a endurecerse de forma evidente. La mayoría de los cálices terminan de engordar, la producción de resina es muy abundante y el aroma se vuelve intenso y penetrante. La aparición de nuevos pistilos disminuye, mientras una parte de los existentes empieza a oscurecerse y replegarse. Bloom Booster entra en su última fase de aplicación, ayudando a completar el engorde y la maduración de las flores. La planta sigue demandando agua y nutrientes, aunque es recomendable mantener una EC estable y evitar aumentos para favorecer una maduración equilibrada. ⚡ EC: 1.8 💧 pH: 6.2 – 6.5 🌡️ Agua: 21°C 🌫️ Humedad: 45–50% 💡 Intensidad: 1000–1100 PPFD 🔥 Nota de cultivo: En esta etapa la prioridad es mantener un ambiente seco y una buena circulación de aire para favorecer el endurecimiento de los cogollos, potenciar la producción de resina y minimizar el riesgo de botritis. ¡Seguimos creciendo fuerte! 💪

You don't become confident by shouting affirmations in the mirror, but by having a stack of undeniable proof that you are who you say you are, outwork your self-doubt. Nitrogen fixation is a chemical process by which molecular nitrogen (N2), which has a strong triple covalent bond, is converted into ammonia (NH3) or related nitrogenous compounds, typically in soil or aquatic systems but also in industry. The nitrogen in air is molecular dinitrogen, a relatively nonreactive molecule that is metabolically useless to all but a few microorganisms. Biological nitrogen fixation or diazotrophy is an important microbe-mediated process that converts dinitrogen (N2) gas to ammonia (NH3) using the nitrogenase protein complex (Nif).[2][3] Nitrogen fixation is essential to life because fixed inorganic nitrogen compounds are required for the biosynthesis of all nitrogen-containing organic compounds, such as amino acids and proteins, nucleoside triphosphates and nucleic acids. As part of the nitrogen cycle, it is essential for agriculture and the manufacture of fertilizer. It is also, indirectly, relevant to the manufacture of all nitrogen chemical compounds, which include some explosives, pharmaceuticals, and dyes. Nitrogen fixation is carried out naturally in soil by microorganisms termed diazotrophs that include bacteria, such as Azotobacter, and archaea. Some nitrogen-fixing bacteria have symbiotic relationships with plant groups, especially legumes.[4] Looser non-symbiotic relationships between diazotrophs and plants are often referred to as associative, as seen in nitrogen fixation on rice roots. Nitrogen fixation occurs between some termites and fungi.[5] It occurs naturally in the air by means of NOx production by lightning.[6][7] All biological reactions involving the process of nitrogen fixation are catalyzed by enzymes called nitrogenases.[8] These enzymes contain iron, often with a second metal, usually molybdenum but sometimes vanadium. Green clover (Fixation) White clover (Fixation) Red Clover. (Fixation) Yellow Clover. (Fixation, deeper roots) Sweet Thai Basil. (Terpenes) Italian Basil. (Terpenes) Chamomile.(Oil production) Borage.(Pest attraction taste) Lavender.(Pest attraction smell) Marigold(Pest attraction visual) Mycorrhizae are beneficial associations between mycorrhizal fungi and a plant’s root system. Mycorrhizal fungi spores germinate in the soil, creating filaments (hyphae) that penetrate the root cells, thus establishing a symbiotic relationship. This collaboration leads to the development of both intra-radical and extra-radical networks of filaments, enabling efficient exploration of the soil for enhanced access to nutrients and water. Consequently, these vital resources are transferred to the plant, resulting in numerous benefits for crop cultivation. Various mycorrhizal products are available in diverse formulations (powder, granular, and liquid), concentrations, and qualities. Ongoing advancements in products, technologies, and research are reshaping our understanding of mycorrhizae. Despite these positive developments, certain misconceptions persist. In the following discussion, we aim to clarify the truths and dispel the myths surrounding mycorrhizae products. MYTH #1 A HIGHER NUMBER OF MYCORRHIZAE SPECIES MEANS BETTER RESULTS. Contrary to common belief, having a higher number of mycorrhizae species in a product does not translate to better results; in fact, it often yields the opposite outcome. A plant can sustain only one association with a particular mycorrhizal fungi species. Introducing multiple species creates competition among them, which is not advantageous for the plant. The initial colonizer does not ensure the highest success; instead, it gains precedence. It is recommended to select a product with a concentrated presence of a single mycorrhizae species known for its effective performance, rather than opting for a product with multiple species at lower concentrations. MYTH #2 ECTOMYCORRHIZAE ARE EFFECTIVE FOR CANNABIS PLANTS. Although ectomycorrhizae can colonize five to ten percent of plant species, cannabis is not among them. Ectomycorrhizae do not penetrate the root cells; instead, they develop around the roots and on the exterior. For cannabis plants, it is essential to seek out endomycorrhizae. Endomycorrhizae are capable of colonizing 70% to 90% of plant species, including cannabis. Unlike ectomycorrhizae, endomycorrhizae penetrate the root cells, forming structures like arbuscules for the exchange of nutrients and water with the plant. MYTH #3 WHOLE INOCULANT (PROPAGULES) PERFORM BETTER THAN ONLY VIABLE SPORES. The propagule count specified on most mycorrhizae products indicates the presence of spores (viable and unviable), hyphae, and root fragments. However, it is crucial to note that only viable spores, those with the capacity to germinate, can successfully colonize a plant’s root system. Spores are to mycorrhizal fungi what seeds are to cannabis plants—a fundamental component enabling fungi reproduction. Consequently, even if a mycorrhizal product boasts millions of propagules, its effectiveness hinges on the presence of viable spores. Without viable spores, the product will not contribute to plant development. Therefore, the genuine value of a mycorrhizal inoculant lies in the quantity of viable spores it contains, as only viable spores can efficiently initiate symbiosis. MYTH #4 ALL METHODS OF APPLICATION YIELD IDENTICAL RESULTS. To establish the symbiosis, mycorrhizal fungi spores must be close to the plant roots. The optimal recommendation is to directly apply mycorrhizal inoculant to the roots, either in powder, granular or slurry form. This method ensures maximum proximity between the spores and the roots, facilitating a rapid establishment of symbiosis. Particularly with crops like cannabis, which have a short growing cycle, employing this technique is the most effective way to obtain optimal benefits. Alternatively, techniques such as blending the inoculant with the soil are effective, but there may be a delay in the establishment of symbiosis. This is because the roots need to grow and come into contact with the dispersed spores throughout the growing media. MYTH #5 MYCORRHIZAE CAN ONLY BE GROWN ON LIVING PLANTS. While the predominant method for commercially producing mycorrhizae involves growing them on the root systems of living plants (in vivo production), it is not the exclusive nor the optimal technique. In fact, this production approach has notable drawbacks that the “root organ culture” method just does not have (in vitro production). In vitro production occurs in meticulously controlled, aseptic laboratory conditions, allowing for the consistent generation of products that are viable, highly concentrated, species-specific, and free from pathogens. Achieving such precision and quality is impossible when relying on the cultivation of mycorrhizal fungi on plants exposed to external conditions. In conclusion, it is crucial to take all these factors into consideration when choosing the appropriate product for your crop to fully harness the wide array of benefits provided by a high-quality mycorrhizal product. STRONGER PLANT – Stress resistance. FASTER GROWTH – Improve plant structure and shorter veg time. INCREASE YIELD – Overall more biomass. IMPROVED QUALITY – Increase cannabinoids and terpenes content.

Hello growmies! Welcome to week 9... which is the final week for these utterly rapid F1 hybrids from Royal Queen Seeds. Day 60: Well well well, while doing a quick loupe check I realised these ladies were about ready! So they were harvested and are currently drying! Harvest update to follow after dry. It is sort of hard to see the amber trichs under the microscope because in the actual buds themselves is where they were most developed, but it was easy to see with the loupe, and you can see some here and there on the sugar leaves and many "on the turn" and yellowing. Anyway they are drying now... and I have REALLY BIG NEWS. Due to the ridiculously rapid nature of these brilliant Epsilon F1 hybrid cannabis plants, it has become technically possible for me to squeeze another grow series in before the summer break... ...so here is the very first official announcement of that: Coming very soon! UnorthadoxDude Grow Series 3: An Epsilon Adventure! With gratitude and warm feelings to James and the rest of the team at Royal Queen Seeds for making it possible and sponsoring a more in-depth look at the Epsilon F1. This grow series will feature TEN Epsilon F1 plants from Royal Queen Seeds. If you want to grow a plant that meets or exceeds the breeder's claims on speed, grow these! https://www.royalqueenseeds.com/uk/f1-hybrid-cannabis-seeds/620-epsilon-f1.html This will be a perfect opportunity to test some nutrients side by side and I may well do that, the exact configuration of planting and training (if any) I have not yet decided, however I will attempt to grow all ten, and they will have the entire grow space to themselves. Any thoughts, comments, and suggestions are welcomed. Any nutrient suppliers out there that want to get in on this grow please get in touch. I grow in coco and currently use BioBizz primarily.

Nice growth and bud developtment. Hps still doing its thing while im sitting back and relaxing. Got to keep an hawk eye on watering. I feed full strenght going over to full canna so they were transplanted into soil. Clones doing good but the Lemon skunk clone dont feel to good. Lets see what the week will bring.

Harvest Sticky Broccoli Auto von Zamnesia für den Cup ist rdy to Cut. Hab mich Heute für die Harvest entschieden und finde sie wirklich sehr gelungen 😌 Sie hat ein sehr gutes Blüte zu Blattverhältnis, die Budstruktur ist wirklich sehr Sticky, wie der Name vermuten lässt. Bin gespannt, wie die Wirkung ist. Hoffentlich nicht zu Couch-Lock mäßig aber wenn, ist auch nicht schlimm. Freut mich die Dame auf ihrem Weg begleitet haben zu dürfen 😊

🔥🔥🔥This heatwave is killin me.🔥🔥🔥 Thank God for the rain. Set kickin myself for deciding to hand water when I have everything I need to make an automated system. Taking clones trying to decide which strains to keep. Gave my gf's son 2 of the 3 pots that I had, so I'm down to 31 total. Indoor and outdoor should finish at the same time for a 50 plants harvest in the fall.😀😀 Even if I gotta build my kid a hamster ball, I need schools to open.

Cosecha Reporte de Peso húmedo & Peso Seco de LemonPaya by FastBuds! ⚖️ Total peso húmedo 186 ⚖️ Total peso seco TBD 💦Pérdida de H2O durante el proceso de secado TBD 🎨Colores Un color verde claro brillante! 👃Olores 💐Floración Papaya (predominante) con un toque (potente) de delicioso limón 🏜️ Secado TBD 🍗 Curado TBD 🍽️Sabor A definir cuando esté bien curada en el reporte de humo Variedad 💪Resistencia Resistente 9/10! - Floración detenida por 10 días por el bloqueo de nutrientes que se ha presentado en la mayoría de plantas de este ciclo. Pero ella se recuperó muy bien y ha hecho unos cogollos densos al final de floración! 🏋️‍♂️Entrenamiento: Se ha adaptado bien al topping (en 2 ocasiones), supercropping y LST! Una crack! 🌱Vegetativo: Un vegetativo sin incidencias, con una bonita estructura! Ya en vegetativo al frotar las ramas, se desprendía olor a Papaya 😍 💐 Floración: Cogollos muy densos a pesar del bloqueo de nutrientes que superó sin problemas en 10 días! El olor a Papaya y fondo de limón es impresionante! Genética: Estupendo trabajo de breeding de FastBuds! 👨‍⚖️Conclusión: Una cepa deliciosa a plantar una vez en la vida! Muy interesante el perfil de Papaya y Limón!

The week went really well and we are starting strong into week 3. The King's Juice Auto #1 is giving me some worries because she's a little bit small. Also, I saw an aphid on her. Never underestimate green light spectrum guys! Speaking of light... I raised the light intensity up to 30% (80W) and will keep doing it like this until I end up with a DLI of 40-45. With 19 hours of light that would be roughly 60-65% of light output. Interesting. From the side view, I think #2 is my favorite but overall it's still #3. Still unsure what kind of training I should do or if at all. Alright, I trained them and tried some different strategies. I topped #3 because she was by far the tallest one anyway, I "lollipopped" #1, so that she hopefully pushes more power into the upper part and I just tucked the fan leaves of #2 under the branches. At least as far as I could. #2 definitely has some lovely growing! She also has the first white hair coming out. Will try to get a photo of that later, hopefully with my new wifi microscope. Should be delivered tomorrow. Wasn't delivered but how she develops, I don't need the microscope. First set of white hairs is clearly visible! I'm exited to see how they continue to develop.

Desgraciadamente el cultivo se quedó estancado en altura y demás. Estoy decepcionado pero la próxima saldrá mejor, no haré tantas podas y quizás cultive automáticas para cosechar rápido

?