Processing
Likes
Comments
Share
@
Follow
Likes
25
Share
🍼Greenhouse Feeding BioGrow ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ by VIPARSPECTRA (models: P2000 & XS 2000)
Likes
8
Share
🌿 Woche 5 🌱 Wachstum & Training 🌱 Das Training läuft fantastisch – ein täglicher, stetiger Prozess. 😬✂️ Beide Damen sehen rundum gesund aus, mit kräftig grünen Blättern. 💪🍀 Sogar ein halb abgebrochener Trieb hat sich richtig gut erholt. 👌🌱 Man merkt inzwischen, dass eine der Damen dominanter ist. 👑🔥 Der mittlere Bereich ist hart umkämpft – vielleicht doch ein Ticken zu eng für zwei Pflanzen. 🤼‍♀️😨🌱 Ich habe daher ordentlich entlaubt und ein paar kleinere Triebe entfernt. ✂️🍃🗑️ Langsam füllt sich der gesamte Raum mit einem gleichmäßigen Blätterdach. 🌳💚 Der Stretch hat begonnen – und alle Triebe haben richtig Bock, steil zu gehen! 🚀🌿🎯 💧 Living Soil – Only Water 💧🌍 Wie man sieht: Kein einziger Trieb oder ein Blatt mit Mängeln. ✅🌱👌 Die Vegetationsphase lief absolut problemlos – ganz ohne Temperatur- oder Luftfeuchtigkeitsunterstützung. 🌡️💨❌ Nur mit einer Mischung aus destilliertem Wasser und Leitungswasser. 💧🚰 🔄 Drehbarer Topf 🎥 Ich bin nach wie vor ein großer Fan dieser Lösung! 😄👍 Nicht nur entstehen witzige kleine Videos, sondern es hilft enorm beim Training. 📸✂️ Ich achte beim Formen stets darauf, die Drehfunktion nicht einzuschränken – klappt bisher richtig gut. 🔄✔️ 💡 Licht & Schatten 🔆🌘 Im Laufe der Woche habe ich das Licht auf bis zu 400 PPF hochgedreht. 💡📈 So streben die Triebe weiter aktiv nach Licht – bekommen aber auch nicht zu wenig. 🌞🌱➡️💥 💧 Blumat & Gießen 💧🚿 🕒 Alle paar Tage bei 110 mbar 🚿 Jeweils 2 l Wasser 💦 ☀️ Wetter 🌡️🔥 Die Temperaturen waren (und sind) brutal: 26°–33 °C. ☀️ Scheint aber bisher alles gut zu verkraften. 😌🌿💪 🎶 The Grow must go on! 🌱🎵💚✨
Likes
2
Share
Although both plants are amnesia haze, they seem to be showing very different traits already. AH#1 is forming typical Sativa like buds as expected and should be ready for harvest in the next couple weeks. AH#2, while 3 weeks younger, is much much more pungent than her older sister and the plant is already a lot bigger in size!
Likes
22
Share
@Island
Follow
Semana 2 Flora: Liguei o segundo painel, uma Quantum Board Lmb 301 da Samsumg - 120W / 3000K. Continuo alimentando a planta apenas com água e fertilizantes orgânicos. O desenvolvimento da planta foi enorme nessa primeira semana de flora, ja comecei a fazer umas desfoliações. Translate by Google Week 2 Flowering Stage: I connected the second light, a Samsumg Quantum Board Lmb 301 - 120W / 3000K. I continue to feed the plant only with water and organic fertilizers. The development of the plant was huge in that first week of flora, I started to do some defoliation. Hugs from Brazil
Processing
Likes
12
Share
@Tazard
Follow
These are clones that I managed to take from my summer garden that became a disaster due to a heat wave that we had breaking 100 year records. I expect everything to be 48” in height at maturity.
Likes
16
Share
@Dunk_Junk
Follow
She's done! I'm seeing plenty of amber trichomes now. Harvesting in progress.
Likes
9
Share
Commencing Week 8: day 50 on January 19th Update is late my sincerest apologies. I will make it up by giving a very thorough smoke report when all is done. Otherwise all is going very well 😁😁👏👏 On day 50 I took the head off of bloody skunk. I checked trichome colors under USB microscope. At least 90% fully milky-white with maybe 5 or 6% Amber and the remainder clear. 😁 On day 55 I gave all of the plants a fan leaf trim including the remaining bottom half of bloody skunk. as I sit here and think about it I believe this will help with ensuring the entire plant ripens and matures at the same time - versus the tops being ready before the bottoms. I still plan on letting the bottoms of all these plants go way beyond the recommended time to see if I can initiate the process of rodelization. Either way I am glad to report that Bloody skunks pollenization looks like it is resulting in some seeds. (See photo). In hindsight my only concern is that because the plant finished a bit earlier than I expected the seeds may not make it to full maturity but I believe it should be okay we'll just have to wait and find out. That being said besides the bloody skunk being done just a few days early everything else seems to be right on time as described in plant profiles on company websites.👍 That's all for now thank you for your patience and attention and support and as usual feel free to leave any suggestions comments or questions and I'll do my best to get back sooner rather than later 😁
Likes
18
Share
Week 8 is this the final week? We shall see, but my new phone made it so I cannot connect my old USB microscope. I checked the trichomes before I got rid of the phone and we were 80% cloudy 18% clear and about 2% amber. I’ve ordered in a new microscope. Once I receive it I’ll upload some trichome shots. Coming down Saturday/Sunday.
Likes
46
Share
Day 10: They have been growing nicely. Beautifull green leafs, no deficiencies or stress. I did some Defoliation and I'm planning to top some plants but not all of them since they make nice main colas as well. Also nice roots so far, will let those grow for another 1-3 days before repotting them into 7L pots. While doing that I will add some new clay for beneeth the pots to have a good run-off. I will add some mycorizza as well to improve the roots and I will water them again with lots of Regulator(anti-stress) and Rhyzotonic( root stimilator). Some days after that, they are ready to get pushed into flowering. Sativas like to grow twice and sometimes even more in size. So the size which they are at the end of this week will be enough. So at the end of this week you will see them being in 7L pots and in a bigger grow space under lots of lamps. There are like 3-5 plants not growing nicely. Might have to kill them. I'm not going to waste time,energy,nutrients on those if they don't grow in size in a couple of days. So might end up with just 235 plants. Il update again at the end of this week. Day 14: I almost finished the rest of the grow room. I still need to adjust and replace the lamps some more and other things. Did many defoliation below the plants. Thoose branches are never going to preduce nice and thick buds anyways. Such a waste of energy and nutrients. Because of the removing of branches and leafs, They get a better airflow and better exposure of light as well. So for now they look a little bit ugly haha and not so bushy anymore, but they will grow into fine looking ladies. I kept 5 or 7 branches each plant and some bigger plants I even topped because I don't want them to stretch alot. Another reason is that I want bigger stems. If other plants that didnt get topped, not improving stems I can still top them until the end of week 1 of flowering. I'm putting them into flowering, by putting the lightschedule to 12hours of light and darkness. It will take a few days before they start preflowering. The first buds will be seen in like 10-14 days. Untill next week!
Processing
Likes
9
Share
Week 14 - 06/14 - 06/20 Light - 400 W HPS & 265 W LED Temperature - 76 +/-3 Humidity - 40 +/-5 D43 Flower - Watered the ladies, they are swelling up nicely. While I am happy to stare at these beauties daily, this is definitely the boring part of growing, not much to report besides beautiful bud growth. They have also started to produce a strong scent, to the point where I will smell the entire house up if the garage door is open. Loving the way this grow is turning out. D46 Flower - Water with nutrients and added some blackstrap molasses to the mix. I took a risk today and tested out some late flower defoliation, I took the large fan leaves off two of the clones and front Hulkberry and Royal Gorilla Scrog. I want to see the difference in growth with late flower defoliation. D47 Flower - Moved the LED light a little further away, I had noticed some light burn on one of the clones. Decided to build a drying box since I am pretty sure I will have to harvest these strains separately. Added some pics, its a quick build out of some stuff I had laying around the house. Only had to buy a $10 filter that I could cut up and $20 silica gel packs. I am running the exhaust air from the tent into the dry box that will filter through the $10 charcoal filter I cut up and doubled up on the filtration. I'm going to add refreshable silica gel packs in the box to help fight humidity. Hopefully, it works.
Likes
38
Share
@MrLahey
Follow
So far all is well. Left plant is looking great still. Right plant is still the same as it was, kinda "off." I cut the top off the main cola due to light burn. There's just no way that the plants energy it was directing to it was being used well. I'd rather it go to the rest of the plant because there's just no way that initial top was going to produce anything. It was gnarled. I've also noticed something odd going on with a couple of the buds on the stressed (purple) plant. I posted one of the pics in the pics for this weeks update. Looks kinda like bud rot to me but this is also my first grow so I could be wrong. It looks like it's only affecting the pistils. I may ask a question in the question forum just to be sure. It's odd though because conditions in the tent seem to be too dry maybe for bud rot (averaging in the 50-60% RH range and there is plenty of air circulation in that part of the tent. I'm thinking it could either be the plant negatively reacting to me cutting the main top off the other day or it's just the fact that due to the plant being stressed out for the entire grow that it's lost resistance to things like bud rot, etc.. essentially, I'm not sure at all lol.. Both plants are already showing a good amount of trichome production as the plants have almost switched from stretch flowering phase to pure on flowering/bulking phase. I can't wait to see the buds really start to mature and grow and get stinky. Carbon filter so far is working flawlessly. A week ago I was thinking it wasn't keeping up because when I'd come home from work I could smell pot but it turns out it was just my cannabutter supplies that I left out lol. D'oh. I've also been monitoring conditions in my basement over the past few weeks and have noticed that rain or no rain, the conditions down there are an average 66 degrees and 60-64% RH. With my dehumidifier if the conditions down there remain in that range, I should be able to achieve perfectly optimal drying conditions for when I harvest in 4-6 weeks or so. :) I am having a blast so far and can't wait to harvest and then really apply what I've learned online from youtube, here and reddit combined with my hands on experience from this grow to really fill out the canopy next time and also ensure both plants are the same height for some great yield. I'll probably mainline 2-3 plants for my next grow. I also want to eventually get into building my own soil and amendments but for now I'm just focusing on not learning & applying too many things at once. I just know that at some time I'd like to switch from synthetic nutrients to organic. I'm hooked for life to growing though!
Likes
6
Share
@Grow4ever
Follow
Blüte geht stetig voran. Wenn das Zelt aufgeht kommt mir ein süßlicher Duft entgegen. Zudem bekommen die Blätter eine tolle Rote Färbung.
Likes
1
Share
@Ertomid
Follow
Buds became a little darker as I wanted, the flavors perfume the air.
Likes
1
Share
@Ketamine
Follow
Really bulking up. Did some defoliation this week. For a low yielder not too bad, crop steering + under canopy lighting is pushing these above and beyond. Trellis up today, really bulking up
Likes
1
Share
@Lazuli
Follow
I use a new EC meter wich shows higher numbers, so now my water shows 1500ppm with 1.2 grams/L drypart and 1ml/L calmag, the thing is if the runoff is about the same as what goes in yr all good.
Likes
31
Share
Continua a crescere bene senza nessuno stress viene ben poderosa questa... Già sento il profumo 😂😉😂👍. Anche le altre runtz stanno benissimo
Likes
67
Share
Hi all buddies! First crop from hydro nft growth. Growth went well, I had some management problems in changing nutrients from veg to bloom which delayed the harvest for a week or two. Sensi Seeds' Skunk # 1F is incredibly resistant to mold and insect attacks, very close internodes ensure low height and compact buds. Unfortunately I chose the mother phenotype wrong, I found the lowest as I wanted but I lost the fatness of the buds present in other phenotypes, but the game was worth the same and I am very proud of it! I collected after 94 days of flowering, the last 72h 20kg ice cubes in the tank and total darkness which the last 24h without irrigation. After cutting I hung the whole plants in the tent for 24 / 48h 19 ° C 55% HR. Two days of wet trim to 8 girls and I hung their colas in the tent to continue drying. With a girl i tried dry trim but i will avoid next time. After a week in the tent I cleaned the colas and removed all the sticks, I placed everything in airtight bags in the refrigerator for 5 days 12 ° C 65% HR (daily check). Now dark storage room at a temperature of 18 ° C 65% HR. At the last weighing a few days ago it was more than 500g, from now it does not lose any more weight. Next week I will take pictures of the weigher and the finished harvest🍀🍀🍀 target!!🍀500g dry/cured🔥 Thank you GD community you are precious for everything, criticism, advice, curiosity, thanks 💚🌱✊🏼 Awesome people here on GD🔥🔥🔥