colors reallllyyy starting to come in. buds are fattening up and getting denser. smell is ridiculous. i’ve had compound genetics khalifa mintz and this smells exactly the same, just with a creamy fruit after smell. gonna be so good. the greener plant i might wash it whole for bubble hash or sift it and make a bunch of hash coins. the blueberry muffins turned out great.

Very very sticky i had to change gloves every 2-3 buds!🤓 Delicious smell🤤

Just getting going again after some mods to my grow box. I’ve replaced the main CFL bulb with an LED and it is much brighter. I also removed the second carbon filter to create more space in the box. The new setup allows for more even space and light distribution and overall more growing space. With the additional light I thought I would try out CO2 so I added an Exhale365 bag. Starting out with 3 plants, 2 Pineapple Express and 1 Pineapple Skunk. There was some type of burn on the first seedling but that was earlier on and it has grown a lot since I first noticed it. I planted the seeds days apart so a few are behind. Growbox summary: * grow space: 19”H x 17”W x 21”D * 4 small, 1 medium internal fans * 3 gallon hydro reservoir * 6 inch exhaust fan + 4 inch exhaust fan in sequence * 150W Mars Hydro TS-1000 (new) * 3 X 20W LED side lights (+1 new) * Exhale CO2 bag (new) Water temps are ranging from 68 up to 70. It’s a small space, but with light covering all sides I think I can get a decent yield. Last time 3.2 ounces were harvested from it. Hoping to hit 5 ounces this time by creating fewer, but larger colas. Day 6 update: * The pinex-1 is looking a little funky. It has weird leaf growth, some minor defects in color, super short compared to the others, and the first leafs are starting to canoe a little. * pinex-2 and pskunk are looking good and growing well, but the leaves aren’t very green. * decided to bump up nutrients a little by moving to week 2 on the schedule and diluting to 60%. That took the ppm up from 400(200 base) to 630(210 base). Hoping if they weren’t getting enough nutrients that this will fix it. * the new light might be a little to bright for these babies. Dimmed it to about 75% power.

Umgetopft in Woche 5, alle drei Tage gegossen, davon bei jedem zweiten gießvorgang gedüngt. Haupttrieb in Woche 6 das zweite mal getoppt.

Well folks we chopped the Last of the Strawberry Blast 😁 The Strawberry Banana 🍌 Strawberry Blast Series 🍓 🍓 🍓 🍓 was a real blast , ive now done 5 Strawberry Cultivars and I'm extremely happy with all the results 😀 Killer Stuff 😀 I want to thank all my growmies for stopping in and showing your support 🙏 it's been much appreciated 🙏 Well my friends that's it for me for awhile😌 So until next time my friends 👉 Happy Growing and of course 🙂 Happy Smoking ........ Later Growmies 👊👊 be well 👌 FC4800 from MarsHydro Lights being readjusted and chart updated .........I've added a RU45 to the mix www.marshydro.ca 👉I am using Agrogardens for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.agrogardens.com 👈 Agrogardens Cal MAG Agrogardens Grow A B Agrogardens Bloom A B Agrogardens Bud Booster Agrogardens PK13/14 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 Would you like to hang with the growdiary community 👉 https://discord.gg/gr4cHGDpdb 👈

The 1st week was kind of nerve racking wondering if I did the right thing by popping the seed straight into the soil. Luckily 🍀 everything went smooth, with an exception of me having to leave for a couple of days. I’ll show you an update on how that went on my next post for week 2. Keep your fingers crossed 🤞 for me and please send any advice you guys and gals have in mind. Again this is my first time growing I could use all the advice I can get! 🙏 -Uncle Cabbage

Here we go 😊 Planning & germination 👍 I´m really looking forward to this run, the SpectrumX from Medicgrow with build in PPFD, 4 spectrums V1, F1, VS, FS and 880 Watt is definitely serious business 👊 Trying out a new soil in this grow. The plant mulch is an exclusive mixture of harped mulch, nutrient-rich natural fertiliser, hill sand and long-term matured compost. The mixture provides a porous and airy structure, which ensures that both water and nutrients are easily accessible to the plant's roots. Stay tuned and Keep it green 😎

I have a new light with a bloom setting hopefully that will make a nice flowering. Got a new fan for air circulation. The new light has cooling fans. Haven't noticed any burns so im happy with my order. If you look at the last few pictures my tent is home made and cheap very cheap. The lights not an expensive one but I think its fine for now.

G.23: le piante sono in salute anche se la g.p. ha le foglie un po' basse, non noto carenze, ma penso che abbia bisogno semplicemente di più acqua (al giorno 21 ho dato 300 ml, al giorno 23 600 ml). Controllerò domani per vedere se migliora G.24: le piante hanno risposto bene all'innaffiatura e oggi i vasi erano di nuovo leggeri come ieri, perciò nuova innaffiatura da 500 ml per entrambe. G.27: come dalle foto ho messo un piccolo umidificatore a causa dell'eccessivo caldo (30% u.r.). Le piante crescono bene. Sto mantenendo le quantità di fert più basse rispetto alle volte precedenti e mi sta ripagando con un bel verde delle foglie. Questa settimana le piante hanno iniziato ad avere molta più sete e ad ogni giorno che ho pesato il vaso era sempre leggero. Continuate a seguirmi per nuovi aggiornamenti.

Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.

En esta semana se bajaron los niveles de ph y ppm. De 6.5 de ph bajamos a 6.2,6.3 Y las ppm de 700 la llevamos a 1080. Se aumento la dosis de las bases de 2 ml/L a 3ml/L. Se realizaron todos estos cambios para mejorar la calidad de las hojas, las puntas están con un color amarillo, y no se si es algún exceso o carencia a causa de la calidad del agua. Pero en términos generales esta muy bien la primer semana de floracion,quedan muchas semanas más por delante.

Week 5 of Flower 8/5-8/12 ~Average~ Temp: 76-84f RH: 40%-50% PH: 5.9-6.2 NOTES: All is going well💪🏽 The flowers are starting to really put on the weight and smell. I’m a huge fan of Walter white. Happy cultivating🤙🏽

I am very much impressed about this strain She grows with great structure for branching out. I am certainly looking forward to Flowering her in the coming months.

Week 6 (27/02 - 05/03) During this week I will continue to feed the plants with Bio-grow, Bio-bloom and Top-max every other day. The two fat banana are in flowering stage by an entire week, while the blue cheese is in early stage of pre-flowering. The parameters remain unchanged with respect of the previous week: - light: 100% power, 18/6 h per day; - inkbird: 23.5°C, +1°C cooling, -3°C heating; - extractor: 50% power, 18h per day. 27/02 D35: removed a couple of lower leafs to the plants, they were a bit dry 28/02 D36: 1.5 liter of tap water each plant. Today I noticed some brown/orange spots on leaves of fat banana #1. Thanks to golden advises given to me by @GrowingGrannie, I will try to adjust nutrients in the next days. 01/03 D37: first day of recovery, sprayed leaves with tap water. 02/03 D38: second day of recovery, added 1.5ml of Bio-bloom and 1 ml of Top-max to 2.5 liters of tap water (almost 0.8 l each). 03/03 D39: third day of recovery, sprayed leaves with tap water. 04/03 D40: watering day. Added 2ml of Bio-bloom and 1ml of Top-Max to 2.5 liters of tap water. 05/03 D41: end of the week. The blue cheese has grown a lot this week reaching the taller fat banana #2. All three plants seem to be healthy.

Today was the day I gave the plants the last nutrient cocktail 💤 next week i'll only give you water to rinse the plants😙 But the smell of this beauties are awsome i love the toxic smell from the amnesia but you can smell the sweet Bananna too but the amnesia is wayy stronger XD😊

Start der 8. Blütewoche... Unheimlich durstig sind sie geworden. Die 20 Liter Pötte kommen an ihre Grenzen. Beim nächsten mal gibts 10 Liter oben drauf. Aber alles gut soweit, weiter gehts...

So pretty im genuinely happy and interested. GOD IS GOOD Haven't started flower mode yet though..maybe at 10 weeks?