Likes
Comments
Share
@Hempcules
Follow
WEEK 11 My OG Kush really kicked into high gear this week. The flower volume has increased massively, and it looks like this trend will continue for a while. With the insanely high number of shoots and buds, this is definitely going to result in an incredibly strong yield. The only thing worth criticizing is the high leaf density, but we’ll see how that develops over time. I increased the nutrients because the plant is genuinely very hungry. This grow is making me truly happy. PPFD: 1000µmol/m²/s Water: 3x water 2x nutrient solution Vpd: 1,8Kpa
Likes
8
Share
@jaydee702
Follow
she finally showing pistels after three weeks(21) days in 12/12 tent.she is Thriving in its tiny pot dwc hydro spam.she is about 16 inches tall was 4 inches 21 days ago .She has a min of 5 weeks to go still hope she slows her stretch some to stay in the baby bears bed for light distance.
Likes
5
Share
Servus Moin! Die MDC #2 Farn macht sich auch bereits richtig gut. Sie holt langsam zur #1 und zur #3 auf. Bin gespannt welche der 3 Ladys am besten schmeckt. Sie wurde Anfang der Woche an den beiden großen Trieben getoppt.
Likes
22
Share
12/25/2023-Germination Day 1 Merry X-mas 2023 I decided to start a run of SolFIre Gardens Hoodz Candyz S1. I am going to do a cup filled with RO water a touch of Hydrogen peroxide and let it sit for 24-48 hours until I see tap root then I am going to put it into a rapid rooter.. Tap root Down and put it about 1/4 of the say down the Rapid rooter. I made some modifications to my basket on this run.. I have taken a few Pods that I use for my cloning machine and decided that I am going to try and use them as sure plants, so that I can take my water right up to the bottom of the basket this time and see if these can make my planting more consistent.   12/26/2023-Germination Day 2 Tap root achieved Planting Commencing 12/27/2023-Germination Day 3 Misted the dome lightly misted the rapid rooter and added a little water to the bottom of the pan to encourage root growth to the pan. 12/28/2023-Germination Day 4 Ground Hogs day 12/29/2023- Germination Day 5 She is up, she has broken surface, I misted the root riot, and around the bottom of the tray to try and entice root growth down rapidly. 12/31/2023- Germination Day 6 Ground Hogs Day 1/1/2024-Germination Day 7 HAPPY NEW YEARS!!.. I did it I planned it out so my planting day would fall on New Years and it worked.. Yay!!! 1/2/2024- Germination Day 8 Since the roots are not to the water yet, I am pouring one cup of water lightly on the hydroton around the lady to try and encourage root growth down to the water.. 1/3/2024- Germination Day 9 Ground Hogs day, will continue until roots hit the water. 1/4/2024- Germination Day 10 Ground Hogs day, will continue until roots hit the water. I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/5/2024- Germination Day 11 Ground Hogs day, will continue until roots hit the water. I am going to change the water Sunday and kick off Week 1, I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/6/2024- Germination Day 12 Ground Hogs day, will continue until roots hit the water. I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/6/2024- Germination Day 13 Ground Hogs day, will continue until roots hit the water. 1/7/2024- Germination Day 14 Ground Hogs day, will continue until roots hit the water.
Likes
35
Share
Bueno familia ya finalizamos, estas red hot cookies son una cepa bestial. La verdad que el secado muy bien 7 días en Malla y a los botes, 45% humedad y 23 grados es la temperatura ambiental que han tenido en el secado. 4 plantas que se cultivaron en un armario de 1.20 pero estos ejemplares solo ocuparon 80x80. Así que ya está cultivada esta gran variedad que es novedad este 2020, americana de la familia Cookies, la Tropicanna Cookies (Girl Scout Cookies x Tangie) con un porcentaje de thc entre los 17/25%, una bomba. Que decir de Agrobeta, lo peta 💪 en cuanto a nutrientes. Un saludo y buenos humos.
Likes
3
Share
I think she is a beautiful strain, but man is it a pain in the ass to trim here and there, and to LST. Her stems were always very fragile no matter what i did, not to break but to bend. Stayed short, and grew bushy, I couldn't get them to strengthen up. But overall I would say its pretty to look at and grows densely and might be worth a try.
Likes
15
Share
@Uwish
Follow
Hello guys, Here I am again to present you a new run, still with the best leds of the market nevertheless as I changed my growing space from 120x120 to 150x150. So I had to update the material inside... I will run with 3 EVO 5-150 lamps of 320W or 960W with Bluetooth dimmers. For the Hydro system, it will be the V-SYSTEM from Alienhydroponics. In fertilizers I am always with Advanced Nutrients. I work with osmosis water. Currently, 4 clones took on 4. Once the roots are ready, I will transfer the cuttings from the propagator to the V-SYSTEM. ------------------------ since the 16/08, when I transplanted the plants in the RDWC system, I noticed some points that I will mention below and correct next time. 1. The cuttings are too small, allow enough time so that I can completely fill my pots with clay balls. 2. Cut out the bottom of the pots from the cuttings. 3. 3/4 of the cuttings are touching the water, so one is late. Next time when transplanting, add more water, up to the basket in order to immerse all the plants and not to create a difference between each one, consequence now I have 3 that are ready to explode and one that will struggle behind, problem corrected today by increasing the volume of water. 4. The b-52 is a real pain in the ass in RDWC, you have to clean the 2 filters almost every day, with this new soup I'm testing without and I think I'll continue like this just with the base sensi grow A and B, as I use Root rot X, I won't use voodoo juice since all the bacteria would be killed. 5. Use of Voodoo Juice is useless if using Root Rot X which will kill the bacteria. I don't know why but when I transplanted in the RDWC, I put my set up in growth mode, except that the plants were not ready for it, moreover, I made a FIM on each. So I lost some days, these last days I went back to a ppdf of 150, now that my roots touch the water, I declare growth 0 on 22/08, I will do between 21 and 28 days of growth. And as my roots are doing well and touching the water I'll go to a PPFD of 300 ++
Likes
6
Share
@Hashishi
Follow
Lemon tree got a unique growth, nodes are close to one another
Likes
13
Share
@Clyde023
Follow
Thanks for joining on the journal, hope to do a few more stuff from Divine seeds based on how much I enjoyed growing these plants out. Competition was a blast, thank you!!🙌
Likes
54
Share
~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Strawberry Gorilla Auto by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for one of my favorites, and award winning strain from my friends at FastBuds... Strawberry Gorilla Auto: I'll be running Strawberry Gorilla Autoflower which is a 55/45 Sativa/Indica Hybrid. "ATTENTION ALL! Due to our continuous efforts in evolving our breeding process, we are proud to confirm that our Strawberry Gorilla Auto has now become one of the most potent autoflowers in the world! Paving the way to our recent success where she ranked on top & brought home the gold at the very first American Autoflower Cup in California. Moreover, she proved that not only modern autoflowers can compete with photoperiods, but they can even beat them in their field. At the most recent edition of the Farmer’s Cup and competing against various photoperiodic strains, Strawberry Gorilla Auto took home the title of 'Highest Combined Terpenes' in the highly sought-after 'Home Grow Hash' category, with an impressive 97.163 mg/g total terpene content! Our exceptional genetic selection's crowning Strawberry Gorilla Auto strain is a spectacular hybrid known for producing yields of up to 600 gr/m2 in 70 days. This is a very manageable grow that can reach heights of up to 150 cm - due to its magnitude we recommend it for more experienced growers, as a huge plant may be a little overwhelming for first-timers. This show stopping sativa heavy hybrid is perfect as an all day smoke, producing a taste bud tingling, pungent berry and diesel terpene-rich flavor combo that leaves you with a grin from ear to ear, a perfect choice for those looking for a day-and-night autoflower! "* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 10/18- Well here we go into the first real week for the Strawberry Gorilla Auto's from FastBuds! I've got the AirCube system dialed in now and the plants have responded beautifully! I've upped the nutrients to 650ppm's and am running the PH at 6.0-6.2 @ 74℉. Tent temperatures are running 73/80℉ during lights off/on, RH is being maintained @ 65%, and co2 levels at 1150-1300ppm's. I upped the output of the HLG 650R to 65% via a TrolMaster Hydro-X Controller, and have it hung 28" above the plants. 10/20- Yesterday, I drained and cleaned the reservoir and 'brain bucket', then refilled the system with 60L of well water to which added the following: 100ml each of Plagron Cocos 'A' & 'B', 30ml of Plagron Power Roots and 45ml of Botanicare CalMag+, and 3 tbsp. of Plantonics Amino Bliss amino acids for a final level of 650ppm's. I then checked the ph and adjusted to 6.0 @ 74℉. I have also set the GrowAce AirCube system to 'Auto' mode and have it set for three 15min feedings a day, six hours apart, beginning two hours after 'lights on'. 10/22- All three Strawberry Gorilla's are looking really good now with great color and vigor. They all have their forth leaf set emerging now and their node spacing is fairly tight currently. With the girls doing well, I'm primarily concentrating on maintaining a consistent environment in the 4x4, paying close attention to temperature, RH, co2 levels and VPD. The three times a day feeding schedule with Plagron nutrients ( Cocos A & B, Power Roots) continues @ 650ppm. I am also checking the reservoir before each to monitor and adjust the PH and nutrients when needed. I have noticed that after each feed the reservoir PH climbs 0.9of a point to 7.0, so I have been adding 30ml of Safer Grow PH Down which brings the PH down to 6.1. 10/24- Today I drained, cleaned and flushed the AirCube reservoir and 'brain bucket', then filled it with 70L of 74℉ well water. After filling I added the Plagron nutrients separately and also began adding in Plagron Royal Rush. The feedings of Plagron nutrients continue three times daily, and I'm monitoring the reservoir before each, adjusting the nutrient level to 650-700ppm @ 5.9-6.2 ph. The tent environment has remained dialed in with the VPD averaging 1.40kpa over the last seven days. The Strawberry Gorilla's are responding well to the feeding schedule, and are also tolerating the increased light output which I now have set to 80% along with setting the co2 levels to 1100-1400ppm. There goes another week for these beauties and the upcoming weeks promise to be exciting as these girls really take off! See you there!😎❤️ 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚
Likes
6
Share
Week update – Full bulking mode 🌱🔥 This week we increased plant nutrition, pushing feeding up to EC 1.57 / pH 6.3, using a total irrigation volume of 22 L (GrowDiaries doses shown in ml/L). Feeding recipe (22 L total): • CalMag Xtra: 30 ml • Bio·Grow: 6.3 ml • Bio·Bloom: 133 ml • Top·Max: 23 ml • Bio·Heaven: 21 ml • Bud Candy: 38 ml • Atazyme: 25 ml Irrigation is done via drip system + manual support watering to ensure full substrate homogenization. We also fixed a flow imbalance on one dripper so all plants now receive identical flow. Environmental parameters this week: Air temp: 24.6 °C 💧 RH: 52.4 % 📈 VPD: 1.47 kPa ☀️ PPFD: ~914 µmol/m²/s 🌞 DLI: 39.74 mol/m²/day CO₂: ~910 ppm New Spider Farmer dehumidifier has been fully integrated, allowing tighter humidity and VPD control during bulking. Plants are responding well, buds are stacking and swelling. You can also check the microscope shots we took this week and daily progress on Instagram (link in profile). More detailed tracking on GrowDiaries 📊🔥
Likes
3
Share
@CanOli95
Follow
Auch hier gab es eine anstrengende Woche. Ich will ehrlich sein. Ich habe nicht so oft den pH kontrolliert, wie ich es tun sollte. Es gab einen Drift, den ich nun wirklich engmaschiger kontrollieren muss. Thripse haben sich leider auch eingeschlichen, wahrscheinlich durch das Lüften und die Hitze. Hitze wirkt leider auch auf Insekten wie ein Boost. Ich habe die Pflanze etwas mehr durchlüftet und stärker befallene Blätter entfernt. Daraufhin habe ich Spruzid von Neudorff verabreicht. Es ist eher ein biologisches Mittel auf der Basis von Chrysanthemen, welches biologisch abbaubar ist. Weil die Pflanze sich noch in der vegetativen Phase befindet, ist die Anwendung auch noch bedenkenlos. Ich wollte es nur Mal erwähnt haben, falls sich jemand über den Schleier auf den Blättern wundert. Gestern gab es eine eine NL mit EC 1,4. Heute habe ich nachgeschaut , da war sie bei 0,9. Hat mich etwas gewundert, Morgen wird nochmal kontrolliert , wie rapide der Abstieg tatsächlich ist . Durch das entlauben ist mir erstmal aufgefallen, wie Dick der Stamm geworden ist. Das ist wirklich eine solide Basis für die Blüte. Wenn erstmal Raubmilben da sind und die Nähestoffe stabil sind, wird das denke ich ein sehr schönes Projekt.
Likes
10
Share
@Mr_Ewell
Follow
Week 5 from sprout. Welp the girls are in there stretching phase and there's a few alternating nodes. And ive switched some things so I'll try to be thorough for any future people reading. First i took out the two house speakers the pants were sitting on and put them on the floor. Which put my lights back at about 25 inches from the canopy.... again... I have a cut up air mattress lining the bottom and side as a make shift tub to catch the runoff. Honestly dunno how ima drain or empty it yet but i have 2 inches of a closet to figure that out. I reluctantly switched to tap water today, my ppm of straight cold water was 255 so hopefully the chlorine evaporates and the water temp raises before i water them. On that subject, I've switched up their feeding. A combination of cal mag, grow, and bloom. About 1.5 ml per gal of all three. Will be feeding this until the flowering stretch stops in a week or so at which time I'll omit the grow and cal mag and feed bloom. Each plant gets 1.5 liters 2 times a day. (Unless im busy/ lazy). Will update ppm when i get things dialed in. Took a good amount of leaves outta necessity of space and light.... and kinda to purposely stress them out jus a little to slow their growth just a tad.. I'm keeping the same 20/4 light schedule. As of right now still have the one led light. Which is why i keep having to move the lights/ plants. So i get as close to the sweet spot of par as possible. They're definitely sativa dominant and 4 plants are 30 inches or more. The small one is about 20 inches. . Ps.... I had to write all this shit twice cause my phone died.
Likes
26
Share
Big week! I got my new EarthBoxes and a bunch of goodies. I picked up the Probiotic Farmer's Alliance kit from BuildASoil, so I also got some EM-1, Kashi Blend, dolomite lime and Malibu compost. Alongside that I picked up Colorado Worm Compost (vermicompost), Gnarley Barley (malted barley, corn and hemp) and Craft Blend (aprox 3-5-2 organic mix). Unfortunately there was a bag of soil missing, so I ended up using my own mix though I am somewhat scared of it being too clay-heavy for the SIP. I inoculated with EM-1 and began fermenting a batch of activated EM-1 to make the bottle last longer. It looks about a week from LST, after that I hope to set up a two-tier SCROG setup and begin growing the bushes. I will begin spraying AEM-1/EM-FPE/EM-5 alternatively once a week for IPM, I will try to avoid using neem this round (unless I find this approach lacking). I also brewed a batch of EM-FPE with aloe that smells incredible, I can't wait to give it a go.
Likes
8
Share
@Chubbs
Follow
Weekly update on these gorgeous girls. Was gone for 9 days so wasn't sure how they'd look when I returned. Wow did they take off into full flower. They're all looking amazing, it looks like two different phenos which is awesome. Over all excited to see them progress as the flower period just started.
Likes
4
Share
@pzwags420
Follow
On day 1 I adjusted the reservoirs PH from 6.4 to 6.0. The tallest cola is 5.5" from the light. Lower colas are mostly 9"-10" from the light. On day 2 the reservoirs PH is 6.1. The tallest cola is 5" from the light. Lower colas are mostly 9"-10" from the light. On day 3 I adjusted the PH of the reservoir from 6.0 to 6.3. The tallest cola is 4.5" from the light. Lower colas are mostly 8"-10" from the light. I did my last major defoliation in order to bring more light and air flow deeper into the canopy. The plants are progressing as expected. No smell yet and the pistils are showing more each day. On day 4 I adjusted the PH of the reservoir from 6.4 to 6.1. My mini dehumidifier was emptied after being 3/4 full after 5 days running. My tallest cola is 4" from the light. Lower colas are mostly 8"-10" from the light. On day 5 I adjusted the PH of the reservoir from 6.0 to 6.3. My tallest cola is 3.5" from the light. Lower colas are mostly 8"to 10" from the light. The plants buds are growing in size with more pistils showing every day :) On day 6 the PH of the reservoir is 6.2. My tallest cola is 3.5" from the light. Lower colas are mostly 7"-9" from the light. It looks like the stretch has finally stopped. I experienced a Runaway with my blumat on my right side plant. I reduced the flow of that blumat by 1 carrot and will monitor the situation going forward. After adding my carbon filter to my exhaust I realized it was drawing the heat from my box causing in proper heating. I will try to reduce the air flow of the carbon filter to make it easier to keep the heat in the grow box. On day 7 the PH of the reservoir is 6.2. My tallest cola is 3.25" from the light. Lower colas are mostly 7"-9" from the light. I did one last major defoliation on day 21 of flower to improve airflow and light penetration keeping only the top leaves of each cola.
Likes
2
Share
@Ninjabuds
Follow
It's a nice change of pace to have these warmer temperatures, even if it's not quite spring yet. Low 40s during the day is a lot more comfortable than what we've been dealing with lately. Hopefully, this is a sign that spring's around the corner. My Skunk Apple plant sounds like it's finally getting on track. After a rough start, it's good to hear things are looking decent. Hopefully, it'll keep looking better and better.
Likes
13
Share
@Ts1Ko
Follow
She looks like i took her out of the freezer 😁 sparkling trichomes all over her 🤩 short but beautiful 💚
Likes
18
Share
Alles läuft gut Pflanzen sind prächtig entwickelt Robust und Gesund werde nächste Woche die Blütephase einleiten.