Likes
Comments
Share
A rainy day for this girl as she navigates the tropical depression passing over our island…the rain and Saharan dust is dumping plenty of nutrients on her.
Likes
74
Share
@Mr_Maes
Follow
This week we will see the colas and buds really dense up. We are about 2 weeks away from harvest now. Next week I will start my flush.
Processing
Likes
3
Share
@MOTB666
Follow
nutrient change 7/18 had to remove scrog net was too difficult trying to move around their to change it out. Another week of explosive growth almost 2 feet tall already and starting to fill up the whole area already. Switched the light to bloom almost out room to move my light up.
Likes
35
Share
The buds continue to grow and there are more and more trichomes :) I'm now watering with 4 ml/l of Bio-Bloom which is the maximum dosage recommended by the data sheet. The plants look well and the yellowing of the leaves almost stopped. There are yellow leaves appearing on the O.G. Kush. I think they are too close from the light but since most of the plant looks healthy, I will not move it away from the light. Harvest period is slowly coming. I think they will need around 4 more weeks to be ripe.
Likes
Comments
Share
Likes
144
Share
@DevilsBud
Follow
New week for the 7 strain 11 plants grow Relax week for the girls one good feed off nutrients and then couple watering with call-mag before start of flowering some defoliation here and there and final big haircut and removing lower grow i want to focus on top grow and less popcorn buds going on 24/3/22 Big defoliation for making the 12/12 switch Will be updating Tru the week And remember just grow weed and stop growing bullyish behavior visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
11
Share
@MedicaL
Follow
Bloom: -23 den FF -30 den Auto Proběhla defoliace, hodně šlo pryč, snad to poberou.Auťák sype pěkně na 12h 🌞
Processing
Likes
13
Share
*ADVISE NEEDED* The day before yesterday I discovered a huge error in my system. I placed filter material in the feed-throughs of the breeding boxes. This is to prevent the roots from growing together over time. However, what I caused with that is very difficult to explain. The bottom line is that the distribution of food and circulation was actually not good at all. This also explained the differences in the water temperature, but also PH and EC values. That is now completely under control because it now runs stably for 2 days. However, you can see that the records have had a bad start. I am thinking about starting over. Week 3. Week 2 was looking for the correct settings for my system. I found out that the temperature in the bins is quite different. When I set the water chiller to 19 degrees, it all flows fine into the first container. There it rises about 0.5 degrees per bin. The margin of the chiller is about 1 degrees, causing too many fluctuations in the system, with tray 1 becoming too cold and the last one too cold. I solved this by shielding the box at the inlet of the tent with heat-protective foil. I also put a fan on the water chiller. If that catches on, the entire loft heats up, whith more fluctiations. However, I have enough space to measure very precisely and I am getting more and more control. I think the brown leaves were the cause of much too hot water. Since I have the water temperature under control, I see that the new leaves are growing nicely. Moreover, since yesterday (13-5) I received the nutrition. 10 days late. I just finish the root scheme I think. That is still 3 days a 70 mm per day combined with BioBizz Heaven. I tried to take some pictures of the roots and some close ups. I hold the lid with my left hand and with my right hand I try to take a picture zoomed in (max). While the wind makes the roots dance past my lens😵 Something different than usual ... Hope you like it. If you see something that needs to be addressed, let us know. It is my first breeding so there will undoubtedly go wrong. This week I also connected the water reservoir with which I can flush the entire system at once. With this I also control the Ph in the system. Will post photos soon.
Processing
Likes
21
Share
@Siriuz
Follow
Started Week 10 Day 64 Fed them some nutes Day 65 Looking good Day 66 Outdoors for 3 hrs in the morning due to blackout T_T Rested like 6hrs zZzz no lights Day 67 Back to 20/4 schedule Everything is good Day 68 Lil defoliation Got some pics and videos for you all Day 69 Cool Juicy Video Day 70 End of week 10 Overrall she is great! Plan on to give her last meal tomorrow Floranova bloom
Likes
15
Share
@BruWeed
Follow
🍀21/07 - Ya se encuentra en etapa de secado. 🍀En el lavado de raíz le agregue 30L de agua con 10ml de Top Wash, las ultimas lavadas ya el agua de la maceta salia transparente. 🍀A la hora de cortarla largaba mucho olor a dulce, los cocos todos llenos de resina y muy pegajosos. 🍀La gran mayoría de los cogollos son grandes y densos, muy poca cantidad de cocos chicos. 🍀Es una planta espectacular, no tuve ningún problema en toda su etapa, creció perfecta. 🍀La voy a dejar los días necesarios para que pueda secarse, ya compre sobres de humedad para el próximo paso que seria el curado. 🍀Dio un total de 165g, en un indoor de 60x60 y con luz led de 150w. 🍀En estos días seguiré subiendo mas imágenes de como viene. 🍀😶‍🌫️🇦🇷Podes seguirme Insta gram como @bruweed_arg🍀😶‍🌫️🇦🇷
Likes
5
Share
Esta semana pasa a floracion y continua la estimulacion con delta 9 y mañana cambia el fotoperiodo a 12 /12
Likes
14
Share
@Boilly
Follow
So far pretty fast growing for 2 weeks since start. Had 1 that was over watered but made a easy comeback. Started giving half nutes or less because of size and container size. Will be putting in final pot next week. Also had some cloudy cold weather but the next 2 weeks are looking good so they should really take off as it said 9 weeks to harvest from germination. Happy growing
Likes
47
Share
@GrowGuy97
Follow
Day 63 - Niagara got cut down today, she has a very strong smell & right buds can’t waif to see how she smokes! Will be doing a harvest post once she is dry! I also decided to let the Rock Machine & Doctors choice #1 go another week or two
Likes
7
Share
@Rangaku
Follow
Pulled the orange cookie today and couldn’t be happier, the yield is massive, the buds are dense, fruity sweet , sticky and pungent. This plant is prolly my best so far thanks to Dutchfem for another awesome strain . If you’re looking for something special give this strain a try . I’ve smoked a bit of this already and it’s Girl Scout cookies all over then just like a pallet cleanser of citrus freshness that keeps you coming back fir more .
Likes
4
Share
Likes
18
Share
Starting to see the end of triple digit days here in Phoenix metro Arizona. Just waiting for trichomes to develop.
Processing
Likes
5
Share
@WooderIce
Follow
only half way thru week 8, but Im going be too busy to update this over the weekend. unfortunately, the Gelato turned male, so Ive got 4 females (from orginally 8) three GG4, & one GSC. pistils are poppin everywhere, but as the true 1st week of flowering, nothing too fun to see. so far leaves look great, no ph imbalance issues like last grow.
Likes
32
Share
@S_V_F_O
Follow
in ppm 800 ph 7,2 out ppm 2200 ph 5,8 Pots 40cm Satori 50cm Blueberry 35cm Height from floor to light source 1m 25cm
Likes
7
Share
@Chubbs
Follow
420 Fastbuds Week 9 Gorilla Cookies Auto Week 9 update for these two temperamental girls. They absolutely did not like the feeding I gave them a few feds back. Over all besides the yellow and crispy leafs they appear to be growing good. I'm only going to give them maybe two more weeks before they get the chop.
Likes
3
Share
@jahredi
Follow
Added some straw to keep the top layer from drying out. Feeding it .25 gal of water every 3-4 days.
Likes
30
Share
22/9first update since I've been on holiday, I left the plants in the best hands i could find 👌💚 23/9 really pleased with plant #2 I've taken plenty of clones off her before she was in flower(and gifted to friends/kept a couple). Any water she will have this week will just be water & little calmag 24/9 both starting to show where bud sites will soon be, I hope!! Plant 2 has definitely been the start child the whole grow. 25/9 plant 1 popping pistils alot quicker than plant 2 26/9 growing well but taking a while to start flowering, I'm not sure if that's just me being impatient or what?! Either way plant 2 is actually going to be a monster at this rate. I increased boost nutes in hope it will speed things up 27/9 not sure if plant 2 is popping green pistils or she is just a layer bloomer 🤔 plant 1 was put in to flower a little bit later than #2 however she is starting to bloom quicker. Maybe just different phenos? Or maybe because I fucked up with the light timer the other week, who bloody knows?! 28/9 fiiinally starting to get pistils on the larger plant!! I was getting worried she would never stop growing!