Que pasa familia, vamos con la tercera semana de vida de estas Papaya Zoap F1 de Sweetseeds. Vamos al lío, de las 4 plantas, me quedaré con 3 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. También se trasplantaron a su maceta definitiva, en este caso de 7 litros. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. Hasta aquí todo, Buenos humos 💨💨💨

All my plants are dead i had to rip them out of there pots because of a crazy family member

I was in the process of getting my plants ready for flip, and realized I never posted my weekly update yesterday. Last week: I did notice some light intensity issues starting to show so I raised the lights up and adjusted back to 50%. I did get overzealous with my training and broke a main stem last Wednesday. Taped her back no real issues or anything (yet) with the break the branch seems to be fine sofar. This week: Ill do a small top dress this week. (some compost, ewc and bloom fertilizer.) I plan on Flipping Mid / late week, unless the branch shows any stress signs then I'll wait a week. Any advice, tips or tricks are always welcome.

Bit of a difficult start to these girls seeing as this is my first grow and all, but they’re still growing and overall looking pretty healthy, good colour, springy, but I’m suspecting nute deficiency maybe but I’ve upped the food so we’ll see how we do! Now, when to start topping 🤔... Puff, puff, pass ✌️

Veg Week 4 Day 28 to 34 - 4/24 to 4/30 A lot more to talk about this week. It's time to start the AutoPot resevoir feed, 2nd Topping, and Wire Training I waited until I saw 3 new nodes of growth (day 29) and then I topped those branches back to the first node leaving a stump for the new nodes to grab as they swell in growth. The branches are quite more stretched than I am used to, so a break is required on the Y branches as they thicken up. I tried not to break the skin and used knitting needles to smash the branches where I wanted them to bend. All went well. I then used ties to the soil to hold them down while they turn back up to the lights. By the end of the week I moved the wire ties to anchor on the main stem instead of the soil Feed this week was a reservoir feed of 200ppm total before add-ins. I used 200ppm Veg concentrate mix (recipe week 2) and then added 1ml/gal of CaliMagic (General Hydroponics 1-0-0). I then also added 1ml/gal of CaliMagic (General Hydroponics 1-0-0) and ph balance this week was for 6.1 Feed plan next week will be a another ph decrease and nute increase. I will also Intro BloomMix - Intro AirDome Air Line - 3rd Top/Train Videos: Just an end of week spin

This week I have changed the 400w HPS lights for a 240w Leds, and I have seen great improvements for the rust burn that used to plague me for quite some times seems to have stopped and repair to the parts still viable started, now I know it was due to hight intensity and heat for 12h on those fan leaves that turned them dry and eventually burned them... I still have to watch out because those Leds are powerful and loaded with Deep red, IR and UV! They are at 45 cm the closest and 70cm the furthest no bleaching is seen so far, I am keeping a close eye on those leaves tip and if I see bleaching to those I higher up the lights for a while... I feel like I am dancing around those marvelous plants, sometimes pulling the lights or dimming them, tucking those fan leaves shadowing lower growth whenever I feel they need a break or a hand! Trying to be a cannabis whisperer lol Added 2 tablespoons of fish blood and bones to top layer with worm castings and bat guano a handful. Lots of spiky hair on one and the other those are curly. They look almost the same, lots of trichomes, at least 16% covered and smell kushy and flowery, very nice. Let's hope the leaves do not get worse and the repair continues, not to forget to offer a prayer to Marie Jane so all goes well! ☺️🌹❤️

Día 36. Estamos en 6ta semana. Los esquejes se atrasaron debido a que han sido días muy fríos y no he logrado enraizarlos. Decidí poner el extractor de aire junto con la bomba de aire, así solamente se prende 15 minutos cada hora. Así estoy logrando temperaturas mayores a 24°C en el indoor y así voy a lograr el enraizado. La planta ya tiene un tamaño que ocupa casi todo el indoor. Pero lo importante es que la voy guiando y ya estoy proyectando como va a ir cada rama. El tamaño va a exceder lo que esperaba, pero aún así creo que si logro lo que tengo en mente, voy a sacar muy buenos resultados. Igual no me voy a arriesgar demasiado, así que si contando 10 días desde ahora, no logro que los esquejes enraicen, voy a pasar la madre a floración sola. Cómo pueden ver, las ramas están bastante gruesas, y el la ramificaciones van ganando su lugar cada una. Las raíces son demasiado grandes, aunque sé que voy a poder poner la planta en el sistema de arriba igual, aunque me voy a tener que ayudar de algo para meterlas. Es importante no utilizar las manos, ya que se pueden transmitir muchos hongos. Voy a seguir actualizando e ir viendo que pasa. Pero ya estamos en los últimos días de crecimiento, haya o no esquejes. Incluso puede que ya pase la planta al indoor de arriba para darle mayor libertad de crecimiento. Esto me va a servir para tlmar en cuenta en la próxima camada que se vendrá. La idea de esto es hacer las cosas rápido, y no en gran tamaño. Pero siendo que ya estoy en el baile, no me queda otra que bailar. Día 40 Los esquejes no estaban enraizando, así que decidí cambiarlos de lugar y los puse arriba de la luz, donde les da calor y luz tenue. Espero que ahora si agarren. Y hoy fue el gran día, pasé la planta madre al módulo de arriba. Pero lo voy a dejar una semana más creciendo. De esa forma veo si los esquejes llegan a agarrar a tiempo. Y además tuve un problema en el trasplante. Primero que la planta se hizo más grande que lo esperado, y la raíz también. Cuando la pasé, hubo contacto de la raiz con prácticamente todo lo que había cerca. Sumado a que se enredó en el oxigenador, así que quedó una pidra difusora en la raíz. Dado el alto riesgo de haberla contaminado con algún hongo, le puse una solución de agua con agua oxigenada, recirculando continuamente, para lavar las raices y de paso bajar el stress de teansplante. Mañana veremos cómo arranca el día. En el aprendizaje me llevo que en la madre, es mejor hacer un corte en el primer nudo, o dejar las ramas del segundo y quitar las del primero. Y así que queden sólo dos ramas, para luego dejar a los esquejes en el medio. Eso planeo hacer con la próxima variedad. Entre tanto ahora sólo me preocupa que la raíz no se haya contaminado en el traspaso. Ya en 8 días estaré pasando a floración si no hay esquejes. Si llegan a agarrar, habrá que dar unos días de crecimiento hasta que alcancen a la madre en altura. Pero ya está todo en definición. Ahora sólo queda esperar y seguir guiando a la planta. Ya tengo ganas de poner la próxima, pero falta bastante para eso. Tengo 10 semanas de flora, así que recién en 5 semanas voy a poner la nueva madre.

Strawberry Pie Auto ~~~~04.20.23~~~~ Day 51 - Above Ground - Target 65 Days 📝Saturday 06.10.23 - As this week comes to an end, I am seeing signs that the plants need a bit of calcium, so today was a topdressing day with a 70/30 blend of Bloom to Grow, watered in with H20 PG to 6.2 with CalMag at 5ML per Gallon of H20. Look at those Frosty Buds! 📝Thursday 06.08.23 - Watering with H20 PH @ 5.8/6.5 the buds on these girls are just getting crazy fat!, the new light setting is doing very well, and the plants are praying hard, and the Medic Grow Smart 8 Flowering Setting 1. ~~~~~~~~~~~~~~~~~~ 📝Strawberry Pie Auto 📝Grown By: MrJones 📝@fastbuds_official 📝Soil - ProMix HP 📝Medic Grow Smart 8 LED - SETTINGS 60% V1 📝@medicgrow420 📝@gaiagreenorganics ~~~~~~~~~~~~~~~~~~ 📝 A true delight with a delicious aroma and a stunning 26% THC. This eye candy of a cultivar boasts unique colors and reeks of red berries and cookie dough that will leave your mouth watering. ~~~~~~~~~~~~~~~~~~

Defoiled, added a second net. Enhancer and npk booster also added every 2 weeks

Hello. This is the end of week 9 and the beginning of week 10 of flowering. 1 more week till harvest and the weather site said 27* c for the first few harvest days. That will be like 33* c in the greenhouse. Got some white sheets to put up to reflect back some of that heat. Saw some suspected "bud rot" on the tallest bud branch... You can see the brown leaves in the pics... I'll check it later. The thrips are liking plant #1. See the white marks on some of the leaves in the pics. But with 1 week left I won't spray anything. Should take about 5 days to cut down 6 plants. Then a few more to put them into the curing bags. I'll post some pics/video just before harvest next week. OK. Be Cool. Chuck.

GS is very frosty. Rest need extra week im sure especially SS but it smells the best.

Going to stop giving her nutes. I think she’ll be ready in 2 weeks. She’s been an easy grow. Her smell, colors and bud density are wonder

everything is coming along just fine with the ladies they are very dense and sticky

Light Power increased from 50% to 70,height from plants Is 45cm (had to raise up light about 5cm) . Applied azos (with water irrigation). External temps are getting down and that's perfect since light Power Is increased ...temps are the same. One of the three mimosa cake was topped,another One i did LST and the others i decided to not touch. I decided to put light Power to 50 again and distance to 60 because distance from internodes are too close.I don't wanna touch plants ,less defoliation as i can because i'm doing some tests.

Growth has been steady I'm going to start budding coming week 7. I think I'm going to run out of tent room might be a lil late but it is what it is.

Hello friends! day 60! following your advice I applied the cropping in order to bring the tops back into the light and I wanted to try adding ADV nutes to integrate a little! apart from this extreme elongation everything seems to be going the right way! thank you very much for stopping by, leave a like and some advice! happy day and great growth 🌱💚

Still low stress training till end of week five and once they are bigger then the actual pot I will allow them to start growing straight up. Lots of plants Is nice but you don’t want to suffocate them with no space to grow. I want a bush then turn it loose and let her reach up. More space for light to penetrate and helps with air flow to circulate the air better. I defoliated lower third of plant to allow plants resources to be better used on top and to also allow better air flow. Also when using low stress training you’re pulling the tops down to make an even canopy to allow your light to be put at its lowest point to get all your nuggs an even amount of light. As the week went on you can see I have leveled them all out for my light to be at its closest without burning any of my taller branches. I just tied them down more to allow the others to get better light and bulk them babies up more. I had a magnesium deficiency this week with a couple plants so when I watered I added 5 tsp of epson salt to 3L of water along with the rhino skin and then ph the water to 6.0. The only reason I have ph’d the water to 6.0 instead of 6.3 is because the runoff from the last watering was at about 6.8 so I’m trying to lower the runoff and get it closer to 6.5 so I know that my roots aren’t blocking out Nutrient uptake. The plants are a making a fast rebound after giving them the Epson salt watering after a couple days and are getting back to healthy. Week six should be a very interesting week to see how far these babies start reaching up now that I am done low stress training. The smell is very light not too strong yet. Still adding CO2.

Day 32 for the 54 plant grow. 42 different strains of photoperiods and 12 different autoflower strains in the: 8X8 GROW TENT WITH THE NEW          FC-E6500, FC4800 AND TSW2000 and green buzz all organic/vegan fertilizers🤘 The girls are loving their home and everything is doing good and looking pretty nice and getting bigger👍 BREEDERS AND SEEDS: DIVINE SEEDS: MAZAR, OPIUM, WHITE WIDOW, OG KUSH, PABLO ESCOBAR, DIVINE INDICA. AUTO WHITE WIDOW AUTO PABLO ESCOBAR AUTO WHITE RUSSIAN AUTO FRACTAL AUTO MONTREAL AUTO OPIUM AUTO KABUL AUTO MAZAR. WEEDSEED EXPRESS: GREEN CRACK, GHOST TRAIN HAZE, LITHIUM OG, CHEESE. DOCTORS CHOICE: DC KUSH, AUTO NIAGARA, AUTO ROCK MACHINE. EXOTIC SEEDS: HIPPIE BERRY, MALASANA GELATO, EXOTIC ANIMAL. GENE/MEME SEEDS: BLACK HELL. ORIGINAL SENSIBLE SEEDS: PURPLE PUNCH COOKIES, WEDDING CAKE, PURE KUSH, GORILLA COOKIES. SWEET SEEDS: BLACK JACK, GORILLA GIRL, SWEET ZKITTLES. EMERALD TRIANGLE SEEDS: GORILLA GLUE, MASTODON KUSH. SEEDSMAN SEEDS: BLACK SUGAR, PEYOTE FORUM, PEYOTE WIFI, BADAZZ COOKIES OG, PURPLE GHOST CANDY, STRAWBERRY BANANA GRAPE, L.A. PEYOTE KUSH, PEYOTE WIFI CBD, FUEL DOG, CRITICAL PURPLE KUSH. AMSTERDAM MARIJUANA SEEDS: GIRL SCOUT COOKIES EXTREME, GREEN CRACK. QUEBEC CANNABIS SEEDS: BRUCE BANNER, GREEN CRACK, QUEBEC CBD 20:1. I 💚 GROWING MARIJUANA: SKYWALKER OG, BANANA KUSH, BLUEBERRY CBD. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA https://greenbuzzliquids.com/ #greenbuzzliquids @GreenBuzzLiquids https://greenbuzzliquids.com/en/shop/ PROMO CODE: rocknroll https://www.youtube.com/watch?v=8hEqyS1jPpI https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my shit🤜🤛 New FC-E6500 Led Grow Light-FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective compared with other same type lights.Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space.Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat, save 50% energy than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space.Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD FC-E6500 LED grow lamp enable cultivators to produce Density Buds, perfect for full-cycle hydroponic,soil,grow tent/room growing. Dimmable Commercial Grow Light: Cost-efficient,easy dimming & daisy chain max up to 20 lights, IP65 Waterproof, master light easily controlled for commercial & home horticulture. GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍  

She is doing well, some slight defoliation. The topping was perfect to match her sister plant. Starting the stretch with a nice uniform canopy.