Неделя прошла вроде бы хорошо, поливаю сейчас чисто водой, довольная, правда медленно медленно стала цвести, ну ничего пахнет и выглядет всё краше и краше)

3ème semaine de floraison bientôt l'apport Méga PK.

I started to scrog The Church (left side of the closet). I topped the plants after the fourth node. Of the 4 Churches, I didn't properly top two of them. These two are looking like they are developing the main cola as well as the two side colas equally, so it seems there are three of them. Serious 6 is growing slowly. Two of the plants are staying small and scrawny. I'm wondering if that is the phenotype or if I messed up. And to top it all of, there was an accident with the Autopots :-(( This is the second time it happened in my AP system: The float gauges in one of the trays got stuck and the water kept flowing. The tray overflowed and the water ran all over my wooden floor. This also happened at night and I only discovered it the next morning. Luckily, the float became unstock at one point of time and the waterflow stopped. If it hadn't, 30 Liters of water in my tank would have caused serious issues. I was going to start the 12/12 flowering cycle next week, but looking at the Serious 6s I will postpone it by at least another week. That way the Church can scrog longer and I assume won't fill up the net as quickly as Serious 6 anyway, since it more bushy compared to the Serious 6 sativas.

I need to dry the buds in the dark at 19 degrees Celsius and 50% humidity. I hope the effect will be good, The only thing I don't like is that she has too many leaves and I get very tired when trimming the buds, but that's the fault of the strain and genetics and that's how it should be!

Hello Sisters and Brothers. After 3 irrigations with water and atazyme. Today I have watered with the mixture of spirulina, Peruvian maca, brewer's yeast and bio molasses. I added 1 l of banana tea to the mix. in total 8 liters hosmotic water + 1 liter mixture + 1 liter of banana tea. the difference of varieties and fenotipes, is noted by the different hights of the plants. They oscillate between 130cm and 60cm. Thank everybody

Day 42 - Ladies are growing great, some are growing a little faster than others but all in all very happy with this run so far! Thanks for following & happy growing friends!✌️🏼🌱 Day 43 - All of these ladies expect for 1 white widow & 1 orange sherbet keep having problems, yellowing leaves, rust spots, not sure if it’s me or what the issue is considering 2 of them are doing great😬😬 Day 44 - Watered the ladies today, going to give them some calmag next watering when my new PH meter gets here! Day 47 - Buds are starting to get much bigger on a few of the ladies & a lot more frosty!😍

Having cal mag issues going to hit the grow store tomorrow am and see can I get some organic cal mag and see if that helps other than that no real issues 2/24 I’m going sit my dumb ass down and chill I did a defoliation and man I over did it I think it’s pretty aggressive and i don’t know what I was thinking I was just clipping away 🤦🏾‍♂️…… anyway got some calmag for the color issues only going 1/2 tsp see how that goes hopefully when the new growth and more stretch happens it’ll look a lot better I’m also bottom feeding the calmag hope that works too

Week is going great. Buds are starting to thicken up and trichomes are starting to form. This is the thirstiest plant i have had, probably partly due to the high day time temperature, but it looks to be just a minor problem. Can start to see that the yeald will be higher than i expected just by looking at the buds.

3 weeks curing and i think its done now very strong and sweet smell. Really enjoy my first autoFlowering harvest with this strain.

Aumento la ec a 1.4 en la quinta semana de flora, evolucionan bien.

So this is the first round for 2023. This year will be USA PREMIUM quality and types. I did the last upgrade on my growing tent so everything is set for newcomer. I really excited about this year, this will be a brutal grow year.

Hello growmies! Welcome to week seven of An Epsilon Adventure! Massive thanks to both Shogun and Royal Queen Seeds for sponsoring this grow! I have just completed the final defoliation for the three least advanced (and largest) girls. I have also rearranged the tent again to try to maximize the space available and light usage. I have not fertigated for 5 days after the last fertigation was a flush without coco base. I am struggling with humidity at the moment so I have been trying to let the plants go more dry than usual. Daily Updates ### Week 7 Day 2 02:30 7/8 Heavily defoliated plants 1, 5 & 6 and removed some of the lower branches. Rearranged tent then photographed & measured: Plant 1 is now almost unbelievably 2nd tallest at "only" 141cm in height! Her stretch has just about ended. Plant 2 has stopped stretching at 111cm and is 2nd most advanced into flower. Plant 3 has stopped stretching at 95cm and is most advanced into flower. Plant 4 has stopped stretching at 100cm and is 3rd most advanced into flower. Plant 5 has gained 6cm this week and may add few more but she is pretty close to done stretching at 119cm. Plant 6 has gained 22cm this week and isn't quite finished. She is now the tallest plant in the series at 142cm. ### Week 7 Day 2 07:00 7/8 Fertigated 1.6l each ### Week 7 Day 4 02:00 9/8 Fertigated 1.6l each reduced coco a/b to 2m/l each. Spent a bit more time photographing and videoing to try and capture the changes and the developmental differences. These 140cm+ plants are going to STACK. I am bracing myself for a lot of trimming and a monster harvest. 🙏 The current order of maturity and likely order of harvest is 3 2 4 1 5 6. I think the first and last plants will be at least a week apart in harvest, perhaps 2 or 3. ### Week 7 Day 6 23:00 11/8 Fertigated 1.6l each The smell in the tent is there now, really not that strong but there are 6 plants motoring through flower here now so it's not insignificant either. Plant 3 is absolutely stacking now, she's more or less run out of space around her cola and is now growing some foxtail like structures, exciting! Plant 6 the least mature is 2-3 weeks behind plant 3, but her stretch has finally stopped at 144cm. Took wide angle in tent photos today. All of the girls are drinking a lot now, but especially plant 1 who is really thirsty. --- Thanks for reading growmies! 👊 ========== Tent: 120cm x 120cm x 180cm Light: 600w HID Elite Dual Spectrum HPS + Angel Wing Reflector Air: 5" duct fan system with carbon filter ~300 m3/hour + RAM 9" floor fan + 4" intake fan Pots: Air Pruner Fabric Pots 30l - UGro XL Coco + horticultural grade perlite (~20%) Seeds supplied by Royal Queen Seeds https://www.royalqueenseeds.com Nutrients supplied by Shogun Fertilisers https://www.shogunfertilisers.com/en ==========

12/21 - Swapping lights tonight - running the QB3000 Sunraise (300w) FULL SPEC - adding 11 more plants into my 3x3 bringing the total to 17 clones - micro dosing will proceed as normal 😎😎😎😎😎😎

Week 7 of 9 for Do-si-dos, this strain is running 1 week longer than the others. Overall she's the least nutrient hungry of the group and shows the least amount of deficiency. Still, I fed her and extra liter last week. August 1 - added close up pictures.

Buenas a tod@s... Otra semanita de floración para estas hermosas.... Han crecido bastante, las veo muy bien, riengo generalmente cada 2 días, el pH perfecto, absorben muy bien los nutrientes, el sustrato muy bien desde q lo eh cambiado este cultivo... Esty muy contento y el resultado va tomando forma, trabajando duro se obtienen buenos resultados a la larga, hay algunos fallos para mejorar pero de momento las niñas están bien y van creciendo y engordando favorablemente... Me gustaría tener más espacio y más material tecnológico para el cultivo, pero de momento es lo q hay y nos apañamos bien... Buenos humos para todos 🏻💨💨 😎💀 🇦🇷🤝🏻🇪🇦

For LIQUIDS & NUTES ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

09/03 - Clone cuttings running strong - Chopped the mother - Pulled approximately 17 viable clones - currently in solo cups rooting - Heavy on the humidity prop 80% - Temps 79 (F)