I fudged up one pot , when lifting it the down part popped and root parts went away. The plant already had his main branch broken and is still hanging. Please advice on the deficiencies of the biggest plant. What other nutrients can I add here ? I have humic acid in little pallets. Dutch pro bloom is coming on it’s way, I’m still watering with hand distributed nutes that could have the emblems “A”+”B” mixed up. To everyone telling that it brings a big issues to the company - no - it’s just a dude most of the time buying bulk amounts and selling per liter, having the original packaging on the bottle glued up. Anyway, any advice is appreciated.

Leaf tucking wasn't doing much, far too bushy so I started just to let it go. Cut some lowers after the pic was taken.

Week 3 flowering begins! Added B52 to the nute mix this week. LSD is looking healthy and she stretched a little the last week. Thanks for stopping by 👽🌳💚

This lady has been Transplanted on day 39 since she was planted (may 10th) and I've prepared the 15L pot with the complete line of biotabs using 2 spoons of startrex for every 5L, sprinkled a couple of grams of mycotrex on the transplant hole before putting the plant and then I added 3 slow release tabs one biotab for every 5L of soil, so that's why in this case I added 3, after the Transplant was done I immediately watered the plant with 1ml/L of orgatrex and 1g/L of bactrex, I hope you guys enjoy my work this season!!

Week 16 is starting off nice and strong. Lady is starting to look super frosty, and more hairs are starting to turn orange. Bumped the nutrients back up and will continue feeding accordingly. Starting to put off some nice cakey odors now.

a plant very resistant to everything highly recommended...uff .... a knock out plant an earthy taste and pine ... with a dense smoke ...... and of compact and abundant buds ... a 4x4 all-terrain plant ... 100% recommendable ... with their healthy roots....00

​✂️ : Déroulement de la Culture, Coupe et Séchage au #Dryrocket ​Note globale : 10/10 sans hésiter ! C'est la deuxième variété que je teste chez Growers Choice et je suis vraiment plus que satisfait du résultat. ​Retour sur le run ​Le cycle de cette plante a démarré sur les chapeaux de roue avec une croissance ultra-rapide et un stretch impressionnant. Ma principale difficulté au début a été de gérer sa grandeur fulgurante et le déploiement massif de ses innombrables branches secondaires. Le tronc principal s'est transformé en une véritable usine à branches (ce qu'on remarque bien sur la photo de la structure nue ​Malgré le fait que j'aie eu un peu de mal à la canaliser dans l'espace de la tente, et malgré quelques petites erreurs minimes de ma part, la plante a été d'une tolérance incroyable. Elle ne m'en a pas tenu rigueur une seule seconde et m'a récompensé avec des têtes bien dodues, compactes et remplies de résine. Côté arômes, elle dégage une odeur citronnée et sucrée vraiment divine et super agréable.. ​La séance de manucure ​La récolte et le nettoyage ont demandé une sacrée dose de patience : 8 heures de coupe intensives pour parer ces 487 grammes de fleurs et enlever toutes les petites feuilles. Un travail de titan, mais le résultat en valait la peine. ​Place au séchage intelligent ​Pour l'étape cruciale du séchage, les têtes ont rejoint la tente de séchage avec leurs feuilles, et c'est le Dryrocket qui prend le relais. ​Je commence à beaucoup mieux maîtriser l'appareil, qui tourne actuellement à plein régime. C'est un outil vraiment sympa et intuitif : ​Il affiche en temps réel la température et l'humidité de la tente. ​Il s'efforce de stabiliser et de réguler l'humidité cible à 62% (le taux parfait pour un séchage et un curing optimaux). ​L'indicateur "FAN" sur l'écran montre le moteur de l'appareil en fonctionnement et indique précisément à quel pourcentage de sa puissance il tourne. ​Enfin, le boîtier indique le temps restant de séchage et prévient lorsque l'ensemble est parfaitement stabilisé et prêt. ​C'est parti pour l'essai en conditions réelles, voyons ce que ce petit bijou de technologie nous réserve pour le résultat final ! ​Un grand merci à tous d'avoir suivi les aventures de "Bee Happy" ! à @DryRocket pour l'essai du Dryrocket On se retrouve très vite pour le smoke test et le verdict de pesée à sec après son passage au Dryrocket ! merci ❤️❤️

I over done the fast plant spray this week I think a slight deformity on the leaves as you can see, but all good, "update" The deformity is on both of these strawberry plants, But has grown out of both this week,

with her we only have to wait for her growth as well as the green crack ... they germinated the same day ... she has good color and also in her small greenhouse ... in a bottle I only have patience to enjoy it ......

Hey Grow Diaries fam, We’ve reached Week 12, which marks Week 8 of flowering, and our PCRs are entering the final stretch! This is a crucial time in our grow, and we've made some significant changes to our routine to ensure the best possible finish for our beloved plants. Overview Our PCRs are looking absolutely stunning, with buds swelling to their full potential and trichomes sparkling like diamonds. This week, we’ve shifted our focus to flushing and preparing the soil for future use. Environment and Conditions Tent: 3x3, kept clean and efficient for optimal growing conditions. Lighting: ViparSpectra P2000, still providing the perfect spectrum as we approach harvest. Watering: TDS at 130, pH 6.8, and water temperature at 21°C, a significant shift from our previous nutrient-rich regimen. Nutrient Regimen This week, we’ve stopped all nutrient feedings and switched to using Aptus Holland Enzym+ exclusively. Here’s why: Aptus Holland Enzym+: This enzyme product is designed to break down dead root material and organic matter, converting it into usable nutrients for the plant. This process helps in: Clearing Residual Nutrients: Ensuring that the plants use up any remaining nutrients in the soil. Improving Soil Health: Enhancing the soil's microbial life, which is crucial for future grows. Promoting Clean Finish: Helping to ensure a smoother, cleaner taste in the final product by reducing excess nutrients and salts in the buds. The shift to Enzym+ at this stage is about preparing the plants for harvest and also ensuring that the soil can be reused effectively. Growth and Development The PCRs are in their final flowering phase, and they look incredible. With the nutrients now being flushed out, we’re focusing on maximizing the quality of the final buds. The leaves are starting to fade, signaling that the plants are using up their stored nutrients, which is exactly what we want to see at this stage. Soil Reuse One of the key advantages of using Aptus Holland products, especially Enzym+, is the ability to reuse the soil. Here’s how we do it: Soil Conditioning: The enzymes break down organic matter, improving soil structure and fertility. Microbial Boost: Enhances microbial activity, which is essential for nutrient cycling and soil health. Cost-Effective: Reusing soil reduces costs and minimizes waste, making our grow more sustainable. By reusing the soil, we ensure that our next grow starts with a rich, healthy medium, full of beneficial microbes and ready to support another batch of robust plants. Reflections This week has been all about transitioning our plants from heavy feeding to a clean finish. The Aptus Holland Enzym+ is doing its job beautifully, and the PCRs are responding well. The reduced TDS and adjusted pH are ensuring that we’re flushing out any residual nutrients, setting us up for a top-notch harvest. Shout Outs A huge shout out to: Aptus Holland: Your products make every stage of this grow a success. Enzym+ is a game-changer! Art Genetix: The PCRs continue to impress with their vigor and quality. Grow Diaries Community: Your support and advice are invaluable. Here’s to another fantastic week of growing! Stay positive, keep those good vibes flowing, and let’s get ready for a bountiful harvest. Genetics - P.C.R. @Art_Genetix_Team https://artgenetix.world/ Nutricion @aptusholland https://aptus-holland.com/ LED Power @Lumatek and @viparspectra As always thank you all for stopping by , for the love and for it all, i fell blessed to have you all with me for one more love journey Thank you Thank you Thank you , you guys are great and have been amazing , thank you for everything ! #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dogdoctorofficial #growerslove
 With true love comes happiness , Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so ! Friendly reminder all you see here is pure research and for educational purposes only Growers Love To you All Discount Codes : @thecannakan DOGDOCTOR 15% off @theneutralizer PORKIT5-DOG 15% off @kannabiaglobal DOGDOCTOR 30% off @seedsmangenetics DOGDOCTOR 10%off @terpyz.mutant.genetics DOCTOR 15% off Have a fantastic week!

Not much upward growth..looks like she will be a bush. ready to transplant but waiting on soil and some Xtreme Gardening stuff.

She looks great ... she's still getting fat ... and enjoying the sun outdoors ... and I keep feeding her red bird guano every 10 days... she has 90 days....

We are entering the third week of growth for our FBA 2502 strain from 42Fast Buds, and everything is progressing beautifully. We've recently transplanted the plant into a 10-liter pot, giving it more room to thrive. Even though it's an autoflowering strain, we've decided to experiment with a 12/12 light cycle—12 hours of light during the day and 12 hours at night—to see how it responds. The daytime temperature peaks at 30°C, with an average range between 27°C and 28°C, while humidity is consistently maintained at 60% to 65%. The plant has reached a height of 14-20 cm and is already showing three sets of leaves. We're preparing to start low-stress training (LST) to help guide its growth. In addition, we've begun feeding our beauty with nutrients from Xpert Nutrients, and we’re really pleased with the results so far. The plant looks strong and vibrant, and we're excited to see how it develops over the coming weeks!

🌱 Amnesia Skunk — Grow Update Week 6 From Seed · 12/12 From Seed (Early Flower / ~Week 2 Flowering Transition) Quick Recap (for new joiners) This run is 12/12 from seed, and we are now at Week 6 from seed, which places us roughly in early flower / second week of flowering transition, depending on how one prefers to count. No aggressive interventions, no forcing. This grow is based on observation, leaf positioning, and letting the plant express herself naturally. Amnesia Skunk has shown: • Strong vertical intent • Beautiful internodal spacing • A structure that responds extremely well to simple leaf bending She is clearly in flower mode now and transitioning smoothly. ⸻ 🌡️ Environment Update (and Why It Matters) • Day temperature: ~28°C • Humidity: ~65% Outside temperatures are still on the cooler side, but inside the room things have shifted naturally. As plant mass increased, lighting intensity was raised, and under-canopy lighting was introduced, the room itself became a stable heat source. This allowed us to raise temperatures without adding external heating or forcing conditions. This balance is important because it keeps plant metabolism active but relaxed, especially during early flower. VPD Perspective At ~28°C and ~65% RH, we are sitting in a comfortable early-flower VPD range, supporting: • Active transpiration • Nutrient mobility • Strong gas exchange Nothing extreme, nothing restrictive. ⸻ 💡 Lighting & Atmosphere (Why These Numbers Work) • PPFD: ~600–850 (depending on plant size and position) • CO₂: ~900 ppm The PPFD range allows: • Smaller or lower sites to stay productive • Taller tops to push without stress This avoids the classic mistake of lighting only for the tops and forgetting the rest of the plant. CO₂ at ~900 ppm is intentionally moderate, not excessive. At this stage, it supports: • Faster carbon assimilation • Better light-use efficiency • No need to overfeed to “match” the CO₂ Everything stays balanced. ⸻ 🌬️ Airflow Strategy (This Is Not Random) • Vortex extraction • Cross-winds with multiple fans • Constant, gentle movement across the canopy The goal here is movement, not wind. Vortex extraction keeps fresh air cycling efficiently, while cross-winds prevent: • Microclimates • Stagnant humidity pockets • Weak stem development Leaves move gently, stems strengthen naturally, and flowers stay dry and comfortable as they form. Fresh air, no stress, no stagnation. ⸻ 💧 Feeding & Nutrition Strategy (Why the Change Now) • EC: 2.4 • pH: 6.5 This week marks a clear nutritional transition, guided by plant signals rather than calendar dates. Why pH 6.0+ from now on? As plants enter flower, nutrient uptake priorities shift: • Less focus on pure vegetative nitrogen pathways • More demand for elements tied to flower formation, enzyme activity, and energy transfer A slightly higher pH improves availability and balance of these elements in soil-based systems. The plant is clearly asking for it — posture, color, and growth rate all confirm this. ⸻ 🌱 Nutrient Change Explained • Removed: Terra Grow • Introduced: Terra Bloom — 5 ml/L Why remove Terra Grow now? Terra Grow is nitrogen-forward, designed to push vegetative mass. At this stage, excess veg-driven nitrogen can: • Delay flower focus • Encourage unnecessary leaf production • Blur the plant’s hormonal transition Why introduce Terra Bloom now? Terra Bloom supports: • Flower site development • Structural energy needs • Balanced nutrition without over-pushing foliage This is not a shock change. It’s a handover, and the plant is responding cleanly. ⸻ 🌿 Plant Structure, Leaf Work & Expression Amnesia Skunk continues to show excellent structure. • Leaf bending is the primary training method • No topping chaos, no forced stress • Just guiding light and space This method has: • Opened the canopy naturally • Preserved apical dominance while improving lateral exposure • Allowed the plant to stay confident and upright A few fan leaves were removed during photography — not as a defoliation event, but because they were funky, expressive, and worth documenting. Those leaves tell a story: • Healthy venation • Strong turgor • No deficiency signals • No toxicity They reflect a plant that is fed, lit, and aired correctly. ⸻ 🔮 What to Expect Next Expect: • Continued flower site stacking • Gradual stretch control through posture, not force • Increasing resin activity as flower identity locks in Do NOT expect: • Aggressive defoliation • Sudden stress techniques • Chasing numbers for the sake of charts This run stays calm. The plant leads, we follow. ⸻ 🙏 Final Words Thank you to: • Newcomers discovering this diary • Old souls following quietly • The curious, the critical, the supportive • Genetics, gear, sponsors • And the community as a whole It’s genuinely a privilege to share this space and this process. Amnesia Skunk is doing her thing — and she’s doing it beautifully. More soon 🌱✨ FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it.GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74

Week 6 chunking up

Week 18 Daylight 12h40 - ☀️7h40/20h20🌙 🌈Weather changed a lot during this 2 week, alternating sun and rain with medium temperature: low in the morning 8°C and 22/24°C the afternoon. Cold wind: Autumn is coming soon! 🍃 This is the middle of the flowering cycle for 2 plants and the beginning for the others; and it’s harder than I imagined. Interminable war against pests: caterpillars and leafminer flies (+ guest :aphids). However the environment is clean, there is some sticky traps, ventilation and preventives treatments (Neem Oil, Garlic/Laurel) but infestation are a recurring problem 😩. Majors reasons of the proliferation are the hot temperatures in greenhouse, the quasi inexistants natural predators, humidity, plants proximity. September is the reproduction period of the cabbage looper: a butterfly which lays eggs on plants giving some hungry caterpillars. Some others pests are attracted by the nitrogen added in soil (batguano) I did a serious defoliation, continue to check the plants morning and night to catch intruders, sprayed regularly with Neem oil. For the moment the flowering continues. -Brake Pad Breath: plant has definitely changed of physiognomy, branches are covered by a lots of resinous flowers with a pretty good smell. Indica dominance. Around 3 or 4 weeks till the harvest. It will be long: the plant is a victim of pests and caterpillars and lots of leaves are damaged. -Flash Back#2: elegant plant, pretty good flowering since 3 weeks. Globally healthy despite of the pests aggression. Sativa dominance with long internodes distance and a vigorous stretch. -GMO x Zombie Kush: same difficulties against predators, late flowering, just initiated the flowering process but in a good way. -Royal Moby: the tallest one; around 170cm, not really adapted to dimensions of the growing space and not discrete. Plants was really shocked during the first wave of pests and after the sunburn. Late flowering, Sativa. 💦Watering : 2L/plants/48h -grower Master Floraison + Enyme -grower Master Floraison + pk 13/14 -grower Master Floraison + Cal/Mag

Watering every day. Tucking leaves and tying down whenever I’m in the tent. Removing large fan leaves blocking prime bud sites. Looking good.

What up fam, weekly update on these ladies. So far they've dealt with the heat like champs. Thankfully I got my AC fixed and it's back up and running. So thank God as we're having a heat wave still with day temps in the high 90's. They're getting fed 16oz of fed daily. It's looking like maybe another week or two before they'll get harvested. All in all Happy Growing.

A few lower leafs have yellows and shriveled but other than that both of the gals are looking good and the smell is finally started to kick in a bit. No problems at all and totally satisfied with there growth in bud size. Looking forward to this week and compare the difference.

FINAL WEEK? Feb 28th - pH 6.0, PPM 400, 0.8 EC, Temp 77f, Humidity 50% - What changed! 3 gals, hoping this to be the final week. The trichomes look good, just want to ensure all are sufficiently done and ripe. Mar 1st - pH 6.3, PPM 400, 0.8 EC, Temp 81f, Humidity 70% - Adjusted pH from 5.0, added water to adjust PPM from 550. Mar 2nd - pH 6.4, PPM 420, 0.8 EC, Temp 80f, Humidity 55% - Adjusted pH from 5.4, added water to adjust PPM from 550. Mar 3rd - pH 6.4, PPM 460, 0.9 EC, Temp 77f, Humidity 62% - No adjustments. Mar 4th - pH 6.2, PPM 460, 0.9 EC, Temp 83f, Humidity 80% - Adjusted pH from 5.7, VPD is ass, no idea on how to change or fix it. I have 2 intakes and one exhaust, the room the cabinet is in is not high in humidity, just the 1.5x2.5 cabinet. :/ I have tried a dehumidifier, but in the end, it didn't collect anything after a few days, so truly at a loss, I've also tried defoliation, but I'm always afraid of doing too much, I mean I guess it's the last week/week and a half so it shouldn't be too bad to cut leaves off but damn, what about the earliest stages, shits going to be tough to dial in... Mar 5th - pH 6.3, PPM 430, 0.9 EC, Temp 85f, Humidity 70% - Adjusted pH from 5.7, seeing more purple on the buds, maybe I'll go another week just to see if any more color comes out. Mar 6th - pH 6.3, PPM 530, 1.1 EC, Temp 83f, Humidity 75% - No adjustments