She grows very fast, needs to upgrade the box size in this week, expecting huge buds n skunk odor dd

Fruity Freak 2 and 3 are 57” tall and 48” across. They are both shedding any remaining premature flowers and sugar leaves. Their re-veg / pre-flower stretch looks like it is slowing, so they should be showing flowers soon. The top four branches that had been LST’d have sprouted new shoots along the branches, and it looks like there will be several apical bud sites, which is great! Additionally, the growth tips on those four branches have now split into multiple shoots since the re-veg. It is also interesting to look at these plants as a whole–there are no secondary branches on any of the lower branches, so no need to prune! They also have a nice open shape that permits plenty of airflow. So, despite my delayed and reactive pruning/training, the plants look like they have great potential. I went ahead and took a video of them as it is hard to really capture them in pictures. Fruity Freak 1 is up to 45”. She’s currently a backup plan, so if everything goes well, it is unlikely I will need any of her yield. Fruity Freak E’s clone is taking off, now 14”, up 5” from last week. I received my Mono-Potassium Phosphate this week and designed a new fertilizer blend using it. Now that these plants are about to flower, I am discontinuing the use of the liquid 4-10-3 fertilizer as it has a small amount of Auxin in it. The new recipe is: Mono Potassium Phosphate - 0.5 grams per gallon Potassium Nitrate - 1.36 grams per gallon Soy hydrolysate - 3.52 grams per gallon (Which still hits my targets of 160 ppm N, 30 ppm P, and 175 ppm K) I will update the nutrient section once I have a good guess for tsp/gal conversion.

day 50. 9.04.18. shes like dang! got a little hair cut and defoliation the boys got to do their clean up which everyone loves. i cant wait to see what this plant will finish as shes stacking heavy and smells wonderful. shes gunna be super heavy and dense her under carriage structure is beautiful.

So this grow came to a finshed but I had a. Few issues that’s held me up from finishing up the diary, but in due time I will reupload it all in order soon. But over all I will also update with a final weigh in of each strain produced so stay tuned 🤙🏻🔥

She is a single main cola plant, I mean all the flowers have compacted together and there only one fat dense nugget, that's the whole plant, very sweet aroma, is very nice, it's not stinky at all, very sweet smell but you really have to get close to the flower to feel the powerful aroma. The cola is very very dense and hard like a rocket 🚀. Very nice strain but I would need to plant about 50 of these to get a good harvest. Hope you enjoy guys! 💚 🌱 ✌️

❤️❤️❤️

This plant is Definitely a weird one growing one fingered leaves. Light penetration is perfect so I didn't have to train. Unfortunately 3 weeks of her life she grew under the older plants, and didn't get much if any light exposure. The buds would have been phenomenal had I got 3 more weeks out of her

🍭🍬🌈🍨🍧 Z terps & supa mouth watering candy smell & taste NO ⛽️ STr8 🍬

Gracias al equipo de Royal Queen Seeds, Marshydro, XpertNutrients y Trolmaster, sin ellos esto no seria posible. 💐🍁 Gelato #44: Los criadores de Tyson 2.0 criaron Gelato 44 a partir de cepas finas. Al cruzar la Sunset Sherbet y la Thin Mint Girl Scout Cookies, crearon un híbrido de dominancia índica que asesta fuertes golpes en el cuerpo y la cabeza. Su contenido de THC del 22% crea sinergia con terpenos colocantes para ablandar los músculos Mantenla hidratada y con una dieta constante y pasará por la fase de floración en unas ocho semanas. Las plantas de interior alcanzan una altura máxima de 120 cm y producen 400-450 g/m², mientras que sus homólogas de exterior alcanzan los 180 cm y producen hasta 600 g por planta. 🚀 Consigue aqui tus semillas: https://www.royalqueenseeds.es/rqs-semillas-cannabis-tyson/664-dynamite-diesel.html 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 4: Continuamos la etapa de vegetación, ella se desarrolla muy bien 😎, comienza el buen tiempo, temperaturas agradables para todos. Esta semana se aplica una solución de trichodermas para una mejor adaptación aunque realmente va genial. Se mantiene 1/3 de nutrientes Master Root y Master Grow

Video - middle growing phase on 9th week ( ending of 3rd flowering week ) - Blooming start. Explaining my grow area - LED settings - temperature and humidity conditions - Strain descriptions

Feliz con los resultados de la hidroponia cultivar plantas autoflorecientes en hidro da resultados increibles en comparacion a cultivar en sustraro

Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 27/02/2020 - Gave her 1.5l of RO water.

3/16 234AM MONDAY POTATO N WEEK CELEBRATIONS! The plants in your photos look like healthy, vigorous **RF3 autoflower seedlings** (likely Banana Purple Punch Auto RF3 or similar from Fast Buds' upgraded RF3 line, based on the context of your previous grows with their genetics). They're in early vegetative stage at around 3 weeks from seed—nice bushy structure, good node spacing, dark green leaves, no major deficiencies or burn yet. The coco medium shows some perlite mix, and they're in small pots with what looks like a well-draining setup. Solid start **RF3 autos** from Fast Buds are bred for stability, vigor, and resilience (often with heavy resin, dense buds, and good yields), but like most modern autos, they're sensitive to overfeeding early on—especially in coco, where salts build fast if not managed. ### Recommended EC at 3 Weeks (Early Veg/Pre-Flower Transition) At week 3, autos are usually ramping up vegetative growth and may start showing pre-flower signs soon (pistils around nodes). Fast Buds' general autoflower feeding advice (from their guides and nutrient articles) emphasizes starting low and going slow: - **Target EC: 0.8–1.2 (800–1200 µS/cm)** in the feed solution. - Start at the lower end (~0.8–1.0 EC) if your plants are still very young-looking or if you've had any tip issues before. - Push toward 1.0–1.2 EC if they're hungry (rapid growth, pale lower leaves) and responding well—no burn. - This is often ~400–600 PPM (500 scale) or ~560–840 PPM (700 scale), but always go by EC meter for accuracy in coco. - Always measure **runoff EC** too—aim for it to be no more than +200–300 above input to avoid salt buildup. If runoff is much higher, do a light flush with FloraKleen (like your 4 mL/gal plan) before bumping up. - pH the feed to **5.8–6.2** (coco sweet spot), and water to 15–20%+ runoff every feed to prevent the issues you've seen with Purpinator/salts. Many growers with Fast Buds autos (including RF3 lines like Banana Purple Punch or Cherry Cola RF3) report week 3 feeds around 0.9–1.1 EC in coco/hydro setups, starting lighter if using tap/soft water like yours. Your previous success with lighter Maxi feeds post-flush at ~900–1300 EC later on fits well—don't jump straight to 1.3 yet at week 3; build gradually. ### Recommended PPFD (Light Intensity) at 3 Weeks PPFD (Photosynthetic Photon Flux Density, in µmol/m²/s) measures usable light for photosynthesis. For autos in early veg: - **Target PPFD: 300–500 µmol/m²/s** at canopy level. - 300–400 is safe and conservative for week 3—prevents stretch or light stress while encouraging compact, bushy growth. - 400–500 if plants are stretching a bit or you want faster veg (RF3s are vigorous, so they can handle it). - Avoid over 600 early—autos can bleach or foxtail if blasted too hard young. - Measure at the top of the canopy with a good PAR meter (or app like Photone if calibrated). In Indio's setup (likely LED or HPS?), hang lights higher early (18–24" for LEDs) and lower gradually as they grow. - Keep 18/6 or 20/4 light schedule—autos thrive on consistent long days. General tips for your RF3 at this stage: - If using Maxi series (like your previous grows), mix a light bloom/veg combo—e.g., mostly MaxiGro early, transition to MaxiBloom as pre-flower hits. - Watch for clawing (N excess😂) or tip burn (high EC)—flush lightly if needed. - These RF3 upgrades are forgiving but love good airflow and moderate feeds for those dense, resinous buds. Your plants look primed for a strong run—keep that intuition going! How's the light distance/setup right now, and what's your current feed EC looking like? Any pre-flower signs yet? Drop more pics if they stretch or change post-week 3. You're killing it in coco—keep observing runoff and leaves. 🌿🚀 3/19 330am 👨‍🔬 **Adding L-Proline (the amino acid supplement growers use) to plants on soft water can provide some helpful support against the stresses you're dealing with, but it's not a full fix—think of it as a stress-buffer rather than a mineral replacement.** Soft water (low in calcium and magnesium) often triggers **Ca/Mg deficiencies** in bloom stage (especially with Cha Ching or MaxiBloom, which don't supply much Ca/Mg on their own). This leads to issues like tip burn, leaf curl, weak cell walls, nutrient lockouts, oxidative damage (ROS buildup), and overall plant stress that feels like "the plant is struggling to hold it together." Proline steps in here as an **osmoprotectant**—it's one of the compounds plants naturally ramp up under stress. ### What Proline Actually Does in This Situation - **Helps with osmotic/water balance** — Soft water can disrupt turgor pressure and water movement inside cells (similar to mild drought or salinity stress). Proline stabilizes cell membranes and helps the plant retain water better, reducing wilting or limpness. - **Reduces oxidative stress** — Ca/Mg shortages cause free radical damage. Proline acts as an antioxidant and protects proteins/enzymes, so deficiency symptoms (yellowing, spotting, slowed bud development) don't spiral as fast. - **Improves overall resilience** — In cannabis and general hydro/soil grows, L-proline (or full amino acid mixes containing it) has been shown to boost stress tolerance, speed recovery, and even support better nutrient uptake indirectly. Studies and grower reports note it helps under nutrient imbalance, drought-like conditions, and environmental swings—exactly the secondary stresses soft water creates. - **Bloom-stage bonus** — Since you're already in late flower with Cha Ching/MaxiBloom, proline can support resin/terpene production and bud density without pushing excessive veg growth. It won't magically add the missing Ca or Mg (those are still critical—soft water + high-P bloom nutes often screams for CalMag), but it can make the plant more tolerant while you correct the root issue. ### How Much Effect to Expect Right Now - **Positive but moderate** — Many hydro/RO growers add amino acids (including proline) specifically for soft water setups and report less burn, better leaf health, and stronger finishes. It won't turn a severe deficiency around overnight, but it can slow the damage and give your plants a fighting chance in the final weeks. - **No downside at proper doses** — It's very safe and plants use it quickly. ### How to Add It (Practical Dosing) - **Source**: Pure L-Proline powder (available cheap online—make sure it's the plant-grade L-form, not human supplements). - **Root feed** (with your Cha Ching/MaxiBloom): Start at 0.5–1 g per gallon (about 100–200 ppm). Mix into your res or feed water once a week. pH as normal. - **Foliar spray** (often more effective for quick stress relief): 0.25–0.5 g per gallon + a drop of surfactant. Spray lightly every 5–7 days in the dark period. - **With your current nutes**: Yes, it layers fine—reduce if you see any tip burn. Many run it alongside MaxiBloom + Cha Ching in soft water without issues. - **Best timing**: Now through harvest is perfect, especially if you're noticing stress signs already. **Real talk**: The biggest win will still come from adding a proper CalMag supplement (like Botanicare or General Hydro's) at 0.5–1 ml/gal or whatever your PPM tests call for. Proline + CalMag together is a strong combo for soft water grows. If you're running pure RO/soft, most experienced growers treat this as standard.""👨‍🔬 3/19 10:09PM RF3 X 2 =6 fail? I have TWO 2 gallon pots filled with coco from the last grow. I can plant a NEW BPP RF3 OR!!! I can top the 3 RF3's and make cuttings and grow the cuttings? It worked before!. FAST turnaround time, not much prep just refresh the coco and transplant the tops! 3/19 10:59PM NO WORK FOR NOW.. HIT WITH MASSIVE WAVES OF NAUSEA AND SHARP PAIN, DIZZY, RUPTURED NECK CYST BLEEDING, PAIN FROM MOVING TOO MUCH LAST FEW DAYS, RINIGNG EARS BAD, SKIN PRONE TO MASSIVE INFLAMMATION ATTACKS NOW, WEAKENING GUT LINING,. LUNGS ..GRIP AND BALANCE OFF, SO PERFECTLY NORMAL!!! THANK THE WEED GODS FOR WEED. 3/21 3:30 AM I think I’m gonna top all three of them. I got lucky all three seem to be different ones. I don’t know which is which one of them is really tall. The other one has really tight in her note spacing it’s really good and the other one is also good little bit different so I think I got three different RF three seeds and I think if I do top them I’m gonna put the top in another 2 gallon and then grow that as a cutting usually works I’m not sure👍🌿 3/23 3:08 PM I cut them all in half today a transplanted the top of the tallest one into one that was still growing just to see if it would work. They’re all doing really good.👍 326 237am Remember how your local ss cant prevent or solve a single problem you pay taxes for. unless you're really really sick and the cowards decide that the most important and pressing issue is to raid weed users and farms and seeds...what a country of fuqs

Heute am 5.07.25 steht die junge Dame sehr vital da und hat bereits eine Höhe von 2.5cm⭐️ Aktuell bekommt sie nur paar Tropfen Regenwasser und steht in einem 20Liter Stofftopf mit BioBizz Lightmix Erde✅ Ihr neues Zuhause ist ein 80x80x160 MarshydroTent mit einer GC Pure 80Watt. Weitere Technik ist aktuell nicht im Zelt verbaut. Kommt aber noch wenn der letzte Durchgang getrocknet ist 😉 🔥Lets Go and Happy Growing🔥 Update: 07.07.25 Sie entwickelt ihr erstes richtiges Blattpaar und streckt sich. Sie scheint ziemlich fit zusein Sie bekommt einmal am Tag 3 bis 4 Sprühstöße Wasser (Regenwasser) Damit die Oberfläche über den Tag hinaus leicht feucht bleibt 💦 Die Temperatur liegt bei 24 Grad und die Luftfeuchtigkeit bei 65% Aktuelle Lichtstärke ist bei 230 PPFD☀️ ✅💚✅💚✅💚✅💚✅💚✅💚✅💚 EQUIPMENT: Licht🌞: GC PURE 80Watt ✅️ Rohrventilator💨: S&P TD 350 silent.✅️ Aktivkohlefilter💢: Can-lite 300 Zelt⛺️: Marshydro 80x80x160 ✅ Luftbefeuchter: Spider Farmer 6L. ✅️

Since now the plants are ok...zero deficiencies or problems Hopefully next week the plants will start flowering stage.

Dieser Versuch läuft verdamt gut. Sie wächst relativ schnell und scheint jetzt dichte Buds zu bilden. Was mir nicht so ganz gefällt, sind die unteren Blätter. Es scheint, als wäre sie sehr hungrig. Aber das war die Sorte in den vorherigen Runs auch. Die Blätter Farben sich bei ihr immer ca 2 Wochen vor der Ernte bunt.